A linearly polarized dual band reflectarray (RA) antenna designed, fabricated, and tested to operate in the Ku and K band frequencies is reported in this paper. The 24 × 24 cm2 size RA is developed using 1058 integrated elements etched over a 0.275 mm thick Rogers RT5870 substrate. The integrated elements include concentric circular rings distributed co-centric with the source and the Malta cross elements distributed offset from the source. The distribution of these elements is done based on the 590 and 360° phase change observed at 14.25 (Ku) and 22.5 (K) GHz by varying the size of the circular rings and the Malta cross respectively. The designed RA offers a simulated gain of 28.62 dBi at 14.25 GHz and 26.92 dBi at 22.5 GHz. These results are validated experimentally using the fabricated prototype. A measured peak gain of 28 and 26.4 dBi are observed with sidelobe levels (SLL) of −21 and −11 dB at 14.25 and 22.5 GHz respectively. The cross-polarization levels measured at the resonant frequencies are <−31 and <−28 dB. The proposed dual-band RA covers the entire Ku band uplink frequencies utilized for fixed satellite services and the K band downlink frequencies useful for earth exploration satellite services.

This paper describes the outcome of the “Small user TErminal multi band DIplexer” project where the goal is the validation of novel SMD-compliant planar diplexer. The real application scenario concerns an integrated multi-band radio terminal for ground-segment satellite links. The advantageous and novel approach involves the simultaneous use of three different well-established concepts: a microstrip low-pass filter, a substrate integrated waveguide high-pass filter, and the thin-film technology as manufacturing process. The proposed topology applied to a planar alumina-based design guarantees a 15 × 11.1 mm2 footprint and the best integration with surface mountable soldering process over standard PCB technology. Achieved performance and resilience to environmental toughness are suitable for consumer-oriented satellite links or man-pack applications. The designed component targets the Ku 10.7–12.75 (RX) and Ka 27.5–30 (TX) GHz bands but the layout can be easily tuned across the spectrum. The described solution has been manufactured and validated. Thermal cycling and mechanical tests have been carried out to prove the high technology readiness level of the proposed device.

The paper presents a 1 × 2 B-shaped antenna array for dual-band operation at 4 and 8 GHz. The antenna design consists of a rectangular patch with two annular-strip lines fabricated on the top layer and finite ground plane on the bottom layer. The array is formed by designing an optimum T-shaped microstrip line for impedance matching. The dimensions of the antenna array are 78 × 36 × 1.6 mm3. Full-wave simulations have been conducted and the measured results are in good consent with the simulated results. The measured impedance bandwidth (reference −10 dB) has been observed at 3.84–4.16 and 7.78–8.38 GHz. Measured peak gain and radiation efficiency at 4 and 8 GHz are 8.3, 9.4 dB and 82.5 and 81.2%, respectively.

A modified H-shaped metamaterial is imparted in this paper that has a multiple band coverage for reflection and transmission coefficient. The proposed structure exhibits triple band coverage for the permittivity and permeability. Two split ring resonators (SRR) are connected with the substantial H-shaped structure. The 12 × 12 mm2 structure has been printed on FR-4 and a correlation is made between the basic unit-cell and array structures. A comparison is made among 1 × 2, 2 × 2, and 4 × 4 array structures with 1 × 2, 2 × 2, and 4 × 4 unit-cell configurations to validate the performance of the proposed metamaterial. A great transmission coefficient having a band of 13 GHz with a 500 MHz band gap in the middle is demonstrated for all of these configurations. The effective parameters of the resonators cover C, X, and Ku bands independently with double-negative phenomena at X and Ku bands with a frequency range of about 2.5 GHz. The reflection and transmission coefficients of the unit cell are obtained by CST microwave studio. Having an auspicious design and wide range double-negative characteristics, this structure can be applied to satellite communication.

This paper reports design and successful development of new and high performance transmit and receive feed systems for reflector antennas at “lower-extended C-band”. The horns are analyzed and optimized using the mode-matching technique-based software CHAMP. Other feed components are designed with the aid of the mode-matching technique and finite element method based softwares viz. MICIAN and HFSS. The predicted radio frequency (rf) performances comply with the measured results with small deviation. Some issues related to feed system such as impact of horn outer structure; such as base for tooling ball, feed bracket for struts etc. on its rf performance are discussed. It is shown that the outer feed structure plays a significant role apart from the internal cavity of the horn for prediction of electrical performance of the feed system. Besides high rf performance; good mechanical properties such as compactness and ease to fabrication are achieved through innovative feed design.