Drip irrigation and mulching were tested to minimize unproductive water loss through evaporation and weed interference. A field experiment was conducted during spring season of 2020 and 2021 in split plot design with three replications. The study includes six treatment combinations of drip irrigation methods (surface drip and subsurface drip irrigation) and mulching (black plastic, paddy straw and no mulch) along with one conventional furrow irrigation without mulching (as control) in main plots. Four weed control treatments (atrazine 1000 g a.i./ha as pre-emergence, two hand weedings at 30 and 60 days after sowing [DAS], weed free and weedy for whole crop growth period) were kept in the subplots. The combination of drip irrigation and mulches significantly enhanced leaf area index and crop biomass at 60 DAS than furrow irrigation. Integration of subsurface drip irrigation with plastic mulching resulted in the lowest weed density and biomass among main plots. Drip irrigation coupled with plastic and straw mulching resulted in 86 and 50% reduction in weed density and biomass, respectively, as compared to no mulching. Integration of subsurface drip with paddy straw mulch and black plastic mulch resulted in 17.1 and 15.5% higher maize grain yield, respectively, as compared to furrow irrigation. The highest irrigation water productivity (3.58 kg/m3) was observed in combination of subsurface drip and paddy straw mulch followed by combination of subsurface drip and black plastic mulch (3.51 kg/m3). Overall, straw mulching in drip irrigation system proved economical in terms of maize productivity.

Amaranthus species are problematic weeds in snap bean production systems. They reduce crop yields, and their stem fragments contaminate harvested pods. Knowledge of snap bean tolerance to different preemergence herbicides is limited; however, knowing this tolerance is essential for planning a reliable weed management system, breeding herbicide-tolerant cultivars, and registering herbicides for use on minor crops such as snap bean. Field trials were conducted in 2021 and 2022 to determine the tolerance of eight snap bean cultivars to preemergence herbicides with activity on Amaranthus species, including dimethenamid-P, flumioxazin, lactofen, metribuzin, saflufenacil, and sulfentrazone. Snap bean plant density (number of plants per square meter), plant biomass (grams per plant), and canopy biomass (grams per square meter) 21 d after treatment were used to assess crop tolerance to a range of herbicide rates. Linear mixed-effects regression models were fitted to quantify the relationships between preemergence herbicide rate and snap bean cultivar tolerance. Results indicated a high margin of crop safety with dimethenamid-P and lactofen for weed control in snap bean, and a low margin of crop safety with metribuzin and saflufenacil. Results indicated differential cultivar tolerance to flumioxazin and sulfentrazone, which could be driven by genetic variability among cultivars.

Multiple herbicide–resistant (MHR) Palmer amaranth is among the most problematic summer annual broadleaf weeds in Nebraska and several other states. A new MHR corn cultivar (resistant to 2,4-D/glufosinate/glyphosate, also known as Enlist corn) has been commercially available in the United States since 2018. Growers are searching for herbicide programs for control and reduce seed production of MHR Palmer amaranth among Enlist corn crops. The objectives of this study were to evaluate herbicides applied preemergence, early postemergence, or preemergence followed by (fb) late postemergence for the management of MHR Palmer amaranth in Enlist corn fields and to assess their effect on Palmer amaranth biomass, density, seed production, and corn yield. Field experiments were conducted near Carleton, NE, in 2020 and 2021, in a grower’s field of Enlist corn infested with acetolactate synthase–inhibitor/atrazine/glyphosate–resistant Palmer amaranth. Herbicides applied preemergence, such as flufenacet/isoxaflutole/thiencarbazone-methyl, acetochlor/clopyralid/flumetsulam, or acetochlor/clopyralid/mesotrione, provided 75% to 99% control of Palmer amaranth 30 d after preemergence. Preemergence fb late postemergence herbicides resulted in 94% Palmer amaranth control 90 d after late postemergence, reduced weed density to 0 to 8 plants m−2 30 d after late postemergence, and reduced biomass to 2 to 14 g m−2 15 d after late postemergence compared to preemergence-only (59% control, 0 to 15 plants m−2, and 4 to 123 g m−2) and early postemergence–only herbicides (78% control, 6 to 30 plants m−2, and 8 to 25 g m−2). Based on contrast analysis, Palmer amaranth seed production was reduced to 14,050 seeds m–2 in preemergence fb late postemergence herbicide programs compared with 325,490 seed m–2 in preemergence-only and 376,750 seed m–2 in early postemergence–only programs. Based on orthogonal contrast, higher corn yield of 12,340 and 11,730 kg ha−1 was obtained with preemergence fb late postemergence herbicide programs compared with preemergence-only (10,840 and 11,510 kg ha−1) and early postemergence–only programs (10,850 and 10,030 kg ha−1) in 2020 and 2021, respectively.

Palmer amaranth (Amaranthus palmeri S. Watson) is the most problematic weed of cotton (Gossypium hirsutum L.)-cropping systems in the U.S. Southeast. Heavy reliance on herbicides has selected for resistance to multiple herbicide mechanisms of action. Effective management of this weed may require the integration of cultural practices that limit germination, establishment, and growth. Cover crops have been promoted as a cultural practice that targets these processes. We conducted a 2-yr study in Georgia, USA, to measure the effects of two annual cover crops (cereal rye [Secale cereale L.] and crimson clover [Trifolium incarnatum L.]), a perennial living mulch (‘Durana®’ white clover [Trifolium repens L.]), and a bare ground control on A. palmeri population dynamics. The study was conducted in the absence of herbicides. Growth stages were integrated into a basic demographic model to evaluate differences in population trajectories. Cereal rye and living mulch treatments suppressed weed seedling recruitment (seedlings seed−1) 19.2 and 13 times and 12 and 25 times more than the bare ground control, respectively. Low recruitment was correlated positively with low light transmission (photosynthetic active radiation: above canopy photosynthetically active radiation [PAR]/below cover crop PAR) at the soil surface. Low recruitment rates were also negatively correlated with high survival rates. Greater survival rates and reduced adult plant densities resulted in greater biomass (g plant−1) and fecundity (seeds plant−1) in cereal rye and living mulch treatments in both years. The annual rate of population change (seeds seed−1) was equivalent across all treatments in the first year but was greater in the living mulch treatment in the second year. Our results highlight the potential of annual cover crops and living mulches for suppressing A. palmeri seedling recruitment and would be valuable tools as part of an integrated weed management strategy.

Cover crops (CCs) have shown great potential for suppressing annual weeds within agronomic cropping systems across the United States. However, the weed suppressive potential of CCs may be moderated by environmental and management factors that are specific to certain geographic areas and their associated characteristics. This may be particularly true within the U.S. Southeast, where higher mean annual temperature and precipitation generate favorable conditions for both CC and weed growth. To understand the effects of this regional context on CCs and weeds, a meta-analysis examining paired comparisons of weed biomass and/or weed density under CC and bare ground conditions from studies conducted within the Southeast was conducted. Data were identified and extracted from 28 journal articles in which weed biomass and/or weed density were measured along with cash crop yield data, if they were provided. Fourteen studies provided 142 comparisons for weed biomass; 23 studies provided 139 comparisons for weed density; and 22 studies, pooled over both weed response variables, provided 144 comparisons for cash crop yield. CCs had a negative effect on weed density (P = 0.0016) but no effect on either weed biomass (P = 0.16) or cash crop yield (P = 0.88). The mean relative reduction in weed density under CCs was 44%. Subsequent analyses indicated that CC biomass was the key factor associated with this reduction. Weed density suppression was linearly related to CC biomass; a 50% decrease in weed density was associated with 6,600 kg ha−1 of CC biomass. Edaphic, geographic, and other management factors had no bearing on this suppressive effect. This highlights the importance of generating adequate CC biomass if weed suppression is the primary objective of CC use and the potential for CCs to reduce weed density over diverse soil, climate, and farm management conditions.

Junglerice [Echinochloa colona (L.) Link] is increasing its prevalence in eastern Australia by adapting to Australia’s changing climatic conditions and conservation agricultural systems and by evolving resistance to glyphosate. Information is limited on the growth and seed production dynamics of E. colona when it interferes with mung bean [Vigna radiata (L). R. Wilczek], a major potential export crop for eastern Australia. This field study examined the interference of E. colona in mung bean for two summer seasons (2020 and 2021) at Gatton, QLD. Different infestation levels (0, 2, 4, 8, 16, and 32 plants m−2) of E. colona were assessed for their potential to cause yield reductions in mung bean. Seed yield of mung bean was highest in the weed-free plots (2,767 kg ha−1) and declined by 20%, 27%, 34%, and 43% at weed infestation levels of 4, 8, 16, and 32 plants m−2, respectively. Echinochloa colona biomass in mung bean varied from 11 to 137 g m−2 as weed density increased from 2 to 32 plants m−2. Based on a three-parameter hyperbolic rectangular decay model, crop yield loss was 52% and 57%, respectively, when weed density and weed biomass approached maximum. Echinochloa colona at the highest density (32 plants m−2) produced a maximum of 15,140 seeds m−2, and this seed production was reduced by 50% at a weed density of 10 plants m−2. Echinochloa colona plants retained 63% to 68% seeds at mung bean maturity, indicating a great opportunity for harvest weed seed control. This study suggests that a high infestation of E. colona in mung bean fields could cause a substantial yield loss and increase the weed seedbank.

Nine field experiments were conducted from 2017 to 2019 in Ontario to determine the impact of early weed interference on corn yield based on corn growth stage, days after emergence (DAE), accumulated crop heat units (CHU), and weed size. The predicted weed size at herbicide application that resulted in a 1%, 2.5%, 5%, 10%, 25%, and 50% yield loss in corn was estimated to be 1, 4, 11, 53, non-estimable (N est.*), and N est.* cm under low weed density and 3, 5, 7, 11, 27, and N est.* cm under high weed density, respectively. The predicted DAE at herbicide application time that resulted in a 1%, 2.5%, 5%, 10%, 25%, and 50% yield loss in corn was predicted to be 14, 20, 27, 44, N est.*, and N est.* DAE under low weed density and 5, 7, 11, 17, 25, and 59 DAE under high weed density, respectively. The predicted CHU from planting at herbicide application time that led to a 1%, 2.5%, 5%, 10%, 25%, and 50% yield loss in corn was 468, 636, 821, 1,271, N est.*, and N est.* CHU from planting under low weed density and 207, 283, 385, 551, 972, and 1,748 CHU from planting under high weed density, respectively. The predicted crop stage at herbicide application that led to a 1%, 2.5%, 5%, 10%, 25%, and 50% yield loss in corn was V5, V6, V7, V11, N est.*, and N est.* under low weed density and V1, V2, V3, V4, V8, and V14 under high weed density, respectively. Results indicate that weeds must be controlled before they reach 7 cm in height, prior to 11 d after crop emergence, prior to 385 accumulated CHU from emergence, or prior to the V3 stage under high weed density to avoid greater than 5% yield loss.

As part of a long-term experiment to determine the impacts of composted manure and straw amendments (replacing 50% of chemical fertilizer with composted pig manure, wheat straw return combined with chemical fertilizer, and setting no fertilizer and chemical fertilizer-only as controls) on rice-associated weeds in a rice (Oryza sativa L.)–wheat (Triticum aestivum L.) rotation system, species richness, abundance, density, and biomass of weeds were assessed during years 8 and 9. Fertilization decreased the species richness and total density of rice-associated weeds but increased their total biomass. The species richness and densities of broadleaf and sedge weeds decreased with fertilization, while species richness of grass weeds increased only with straw return and density was not significantly affected. The shoot biomass per square meter of grass and broadleaf weeds was significantly higher with fertilization treatments than with the no-fertilizer control, while that of sedge weeds declined with fertilizer application. With fertilization, the densities of monarch redstem (Ammannia baccifera L.) and smallflower umbrella sedge (Cyperus difformis L.) decreased, that of Chinese sprangletop [Leptochloa chinensis (L.) Nees] increased, and those of barnyardgrass [Echinochloa crus-galli (L.) P. Beauv.] and monochoria [Monochoria vaginalis (Burm. f.) C. Presl ex Kunth] were not significantly affected. Ammannia baccifera was the most abundant weed species in all treatments. Whereas composted pig manure plus fertilizer resulted in higher density of A. baccifera and lower shoot biomass per plant than chemical fertilizer only, wheat straw return plus chemical fertilizer caused lower density and shoot biomass of A. baccifera. Therefore, it may be possible that fertilization strategies that suppress specific weeds could be used as improved weed management program components in rice production systems.

Late-emerging summer annual weeds are difficult to control in dry bean production fields. Dry bean is a poor competitor with weeds, due to its slow rate of growth and delayed canopy formation. Palmer amaranth is particularly difficult to control due to season-long emergence and resistance to acetolactate synthase (ALS)-inhibiting herbicides. Dry bean growers rely on PPI and preemergence residual herbicides for the foundation of their weed control programs; however, postemergence herbicides are often needed for season-long weed control. The objective of this experiment was to evaluate effect of planting date and herbicide program on late-season weed control in dry bean in western Nebraska. Field experiments were conducted in 2017 and 2018 near Scottsbluff, NE. The experiment was arranged in a split-plot design, with planting date and herbicide program as main-plot and subplot factors, respectively. Delayed planting was represented by a delay of 15 d after standard planting time. The treatments EPTC + ethalfluralin, EPTC + ethalfluralin followed by (fb) imazamox + bentazon, and pendimethalin + dimethenamid-P fb imazamox + bentazon, resulted in the lowest Palmer amaranth density at 3 wk after treatment and the highest dry bean yield. The imazamox + bentazon treatment provided poor Palmer amaranth control and did not consistently result in Palmer amaranth density and biomass reduction compared with the nontreated control. In 2018, the delayed planting treatment had reduced Palmer amaranth biomass with the pendimethalin + dimethenamid-P treatment, as compared with standard planting. Delaying planting did not reduce dry bean yield and had limited benefit in improving weed control in dry bean.

Weed management is one of the major challenges responsible for growers’ reluctance to switch from conventional to organic vegetable production. Competition from uncontrolled weeds can significantly reduce the yield and water use efficiency (WUE) of vegetable crops. A field study was conducted during the summers of 2019 and 2020 at the Quaker Research Farm of Texas Tech University, in Lubbock, TX, to determine physiology, plant growth, yield, soil water depletion pattern, and WUE of pumpkin as affected by five weed control treatments: 1) ammonium nonanoate 5% ai, 2) ammonium nonanoate 6% ai, 3) clove oil + cinnamon oil 4.5% ai, 4) clove oil + cinnamon oil 9% ai, and 5) an untreated control. Each plot received the same herbicide treatment at 20 and 30 d after planting (DAP). The experiment was conducted in a randomized complete block design with four replications of each treatment. Both herbicides resulted in significant weed suppression compared to the untreated control and weed control was 88% to 98% with ammonium nonanoate and 39% to 69% with clove oil + cinnamon oil. Photosynthesis rate, stomatal conductance, shoot dry biomass, average fruit weight, total fruit yield, and WUE of pumpkin were significantly higher in plants that were treated with ammonium nonanoate compared to the untreated control. All the aforementioned parameters were not significantly different between clove oil + cinnamon oil and the untreated control. Use of higher active ingredient concentration did not improve the performance of either herbicide. Soil water depletion and evapotranspiration were comparable among all the treatments. Based on the results, ammonium nonanoate at its lower concentration could be an option for effective weed control, and for improving fruit yield and WUE of pumpkin.

Palmer amaranth is the most problematic and troublesome weed in agronomic cropping systems in the United States. Acetolactate synthase (ALS) inhibitor and glyphosate-resistant (GR) Palmer amaranth has been confirmed in Nebraska and it is widespread in several counties. Soybean resistant to isoxaflutole/glufosinate/glyphosate has been developed that provides additional herbicide site of action for control of herbicide-resistant weeds. The objectives of this study were to evaluate herbicide programs for control of ALS inhibitor/GR Palmer amaranth and their effect on Palmer amaranth density and biomass, as well as soybean injury and yield in isoxaflutole/glufosinate/glyphosate–resistant soybean. Field experiments were conducted in a grower’s field infested with ALS inhibitor and GR Palmer amaranth near Carleton, Nebraska, in 2018 and 2019. Isoxaflutole applied alone or mixed with sulfentrazone/pyroxasulfone, flumioxazin/pyroxasulfone, or imazethapyr/saflufenacil/pyroxasulfone provided similar control (86%–99%) of Palmer amaranth 21 d after PRE (DAPRE). At 14 d after early-POST (DAEPOST), isoxaflutole applied PRE and PRE followed by (fb) POST controlled Palmer amaranth by 10% to 63% compared to 75% to 96% control with glufosinate applied EPOST in both years. A PRE herbicide fb glufosinate controlled Palmer amaranth 80% to 99% 21 d after late-POST (DALPOST) in 2018, and reduced density 89% to 100% in 2018 and 58% to 100% in 2019 at 14 DAEPOST. No soybean injury was observed from any of the herbicide programs tested in this study. Soybean yield in 2019 was relatively higher due to higher precipitation compared with 2018 with generally no differences between herbicide programs. This research indicates that herbicide programs are available for effective control of ALS inhibitor/GR Palmer amaranth in isoxaflutole/glufosinate/glyphosate-resistant soybean.

Prevalence of wild oat (Avena fatua L.) and sterile oat [Avena sterilis ssp. ludoviciana (Durieu) Gillet & Magne; referred to as A. sterilis hereafter], winter-season weeds, is increasing in the eastern grain region of Australia. Biological attributes of these weeds enable them to survive in a wide range of environments and under different weed infestation levels. The interference of A. fatua and A. sterilis in a wheat (Triticum aestivum L.) crop was examined in southeast Queensland, Australia, through field studies in 2019 and 2020. Different infestation levels (0, 3, 6, 12, 24, and 48 plants m−2) of A. fatua and A. sterilis were evaluated for their potential to cause yield losses in wheat. Based on a three-parameter logarithmic model, the A. fatua and A. sterilis infestation levels corresponding to 50% wheat yield loss were 15 and 16 plants m−2, respectively. The yield reduction was due to a reduced spike number per unit area because of an increased weed infestation level. At the highest weed infestation level (48 plants m−2), A. fatua and A. sterilis produced a maximum of 4,800 and 3,970 seeds m−2, respectively. Avena fatua exhibited lower seed retention (17% to 39%) than A. sterilis (64% to 80%) at wheat harvest, as most of the seeds of A. fatua had shattered at crop maturity. Our results implied that there is a good opportunity for harvest weed seed control if the paddock is infested with A. sterilis. This study suggests that in the absence of an integrated weed management strategy (using both chemical and nonchemical options), a high infestation of these weeds could cause a severe crop yield loss, increase weed seed production, and replenish the weed seedbank in the soil.

Residual herbicides applied PRE provide early season weed control, potentially avoid the need for multiple POST herbicides, and can provide additional control of herbicide-resistant weeds. Thus, field studies were conducted in 2017 and 2018 at Concord, NE, to evaluate the influence of PRE herbicides on critical time for postemergence weed removal (CTWR) in corn. The studies were arranged in a split-plot design that consisted of three herbicide regimes as main plot treatments and seven weed removal timings as subplot treatments in four replications. The herbicide regimes included no PRE herbicide, atrazine, and a premix of saflufenacil/dimethenamid-P mixed with pyroxasulfone. The weed removal timings were at V3, V6, V9, V12, and V15 corn growth stages and then plots were kept weed-free until harvest. A weed-free and nontreated control were included for comparison. The relationship between corn growth or yield, and weed removal timings in growing degree days (GDD) was described by a four-parameter log-logistic model. This model was used to estimate the critical time for weed removal based on 5% crop yield loss threshold. A delay in weed removal until the V2 to V3 corn growth stage (91 to 126 GDD) reduced corn biomass by 5% without PRE herbicide application. The CTWR started at V3 without PRE herbicide in both years. Atrazine delayed the CTWR up to V5 in both years, whereas saflufenacil/dimethenamid-P plus pyroxasulfone further delayed the CTWR up to the V10 and V8 corn growth stages in 2017 and 2018, respectively. Herbicide applied PRE particularly with multiple sites of action can delay the CTWR in corn up to a maximum growth stage of V10, and delay or reduce the need for POST weed management.

Research using the critical period for weed control (CPWC) has shown that high-yielding cotton crops are very sensitive to competition from grasses and large broadleaf weeds, but the CPWC has not been defined for smaller broadleaf weeds in Australian cotton. Field studies were conducted over five seasons from 2003 to 2015 to determine the CPWC for smaller broadleaf weeds, using mungbean as a mimic weed. Mungbean was planted at densities of 1, 3, 6, 15, 30, and 60 plants m−2 with or after cotton emergence and added and removed at approximately 0, 150, 300, 450, 600, 750, and 900 degree days of crop growth (GDD). Mungbean competed strongly with cotton, with season-long interference; 60 mungbean plants m−2 resulted in an 84% reduction in cotton yield. A dynamic CPWC function was developed for densities of 1 to 60 mungbean plants m−2 using extended Gompertz and exponential curves including weed density as a covariate. Using a 1% yield-loss threshold, the CPWC defined by these curves extended for the full growing season of the crop at all weed densities. The minimum yield loss from a single weed control input was 35% at the highest weed density of 60 mungbean plants m−2. The relationship for the critical time of weed removal was further improved by substituting weed biomass for weed density in the relationship.

Velvetleaf is an economically important weed in popcorn production fields in Nebraska. Many PRE herbicides in popcorn have limited residual activity or provide partial velvetleaf control. There are a limited number of herbicides applied POST in popcorn compared with field corn, necessitating the evaluation of POST herbicides for control of velvetleaf. The objectives of this study were to (1) evaluate the efficacy and crop safety of labeled POST herbicides for controlling velvetleaf that survived S-metolachlor/atrazine applied PRE and (2) determine the effect of velvetleaf height on POST herbicide efficacy, popcorn injury, and yield. Field experiments were conducted in 2018 and 2019 near Clay Center, Nebraska. The experiments were arranged in a split-plot design with four replications. The main plot treatments were velvetleaf height (≤15 cm and ≤30 cm) and subplot treatments included a no-POST herbicide control, and 11 POST herbicide programs. Fluthiacet-methyl, fluthiacet-methyl/mesotrione, carfentrazone-ethyl, dicamba, and dicamba/diflufenzopyr provided greater than 96% velvetleaf control 28 d after treatment (DAT), reduced velvetleaf density to fewer than 7 plants m−2, achieved 99% to 100% biomass reduction, and had no effect on popcorn yield. Herbicide programs tested in this study provided greater than 98% control of velvetleaf 28 DAT in 2019. Most POST herbicide programs in this study provided greater than 90% control of up to 15 cm and up to 30 cm velvetleaf and no differences between velvetleaf heights in density, biomass reduction, or popcorn yield were observed, except with topramezone and nicosulfuron/mesotrione 28 DAT in 2018. On the basis of contrast analysis, herbicide programs with fluthiacet-methyl or dicamba provided better control than herbicide programs without them at 28 DAT in 2018. It is concluded that POST herbicides are available for control of velvetleaf up to 30-cm tall in popcorn production fields.

Field studies were conducted over five seasons from 2004 to 2015 to determine the critical period for weed control (CPWC) in high-yielding, irrigated cotton using a competitive mimic grass weed, Japanese millet. Japanese millet was planted with or after cotton emergence at densities of 10, 20, 50, 100, and 200 plants m−2. Japanese millet was added and removed at approximately 0, 150, 300, 450, 600, 750, and 900 degree days of crop growth (GDD). Data were combined over years. Japanese millet competed strongly with cotton, with season-long interference resulting in an 84% reduction in cotton yield with 200 Japanese millet plants m−2. The data were fit to extended Gompertz and logistic curves including weed density as a covariate, allowing a dynamic CPWC to be estimated for densities of 10 to 200 Japanese millet plants m−2. Using a 1% yield-loss threshold, the CPWC commenced at 65 GDD, corresponding to 0 to 7 d after crop emergence (DAE), and ended at 803 GDD, 76 to 98 DAE with 10 Japanese millet plants m−2, and 975 GDD, 90 to 115 DAE with 200 Japanese millet plants m−2. These results highlight the high level of weed control required throughout the cropping season in high-yielding cotton to ensure crop losses do not exceed the cost of weed control.

Glyphosate-resistant (GR) horseweed is one of the most common and troublesome weeds in soybean production fields in several states in the United States, including Nebraska. The evolution of horseweed resistant to several herbicide sites of action has prioritized an integrated approach, including tillage, for effective management of this problem weed. The objectives of this study were to evaluate the effect of tillage or herbicide applied in fall or spring followed by a PRE, POST, and PRE followed by a POST herbicide program for GR horseweed control as well as GR soybean injury and yield in Nebraska. Field studies were established in the fall 2014–2015 and 2015–2016 growing seasons using a factorial randomized complete block design with shallow tillage or herbicide applied at different timings as two factors. Shallow tillage was accomplished using a 50-cm-wide rototiller operated at a depth of 10 cm. At soybean harvest, tillage applied the previous year in fall or spring without any follow-up herbicide treatment provided 79% to 88% horseweed control compared with 27% and 56% control with 2,4-D plus carfentrazone applied in fall and spring, respectively. Tillage or herbicide applied in fall or spring followed by a PRE, POST, or PRE and POST herbicide provided 82% to 99% GR horseweed control at soybean harvest. Soybean yield in this study was similar in most treatments. Tillage or herbicide applied in fall or spring provided similar horseweed control and soybean yield when followed by a PRE, POST, or PRE and POST herbicide; therefore, fall- or spring-applied herbicides can be rotated with shallow tillage for integrated season-long horseweed management.

Field studies were conducted in 2016 and 2017 at Clinton, NC, to quantify the effects of season-long interference of large crabgrass [Digitaria sanguinalis (L.) Scop.] and Palmer amaranth (Amaranthus palmeri S. Watson) on ‘AG6536’ soybean [Glycine max (L.) Merr.]. Weed density treatments consisted of 0, 1, 2, 4, and 8 plants m−2 for A. palmeri and 0, 1, 2, 4, and 16 plants m−2 for D. sanguinalis with (interspecific interference) and without (intraspecific interference) soybean to determine the impacts on weed biomass, soybean biomass, and seed yield. Biomass per square meter increased with increasing weed density for both weed species with and without soybean present. Biomass per square meter of D. sanguinalis was 617% and 37% greater when grown without soybean than with soybean, for 1 and 16 plants m−2 respectively. Biomass per square meter of A. palmeri was 272% and 115% greater when grown without soybean than with soybean for 1 and 8 plants m−2, respectively. Biomass per plant for D. sanguinalis and A. palmeri grown without soybean was greatest at the 1 plant m−2 density. Biomass per plant of D. sanguinalis plants across measured densities was 33% to 83% greater when grown without soybean compared with biomass per plant when soybean was present for 1 and 16 plants m−2, respectively. Similarly, biomass per plant for A. palmeri was 56% to 74% greater when grown without soybean for 1 and 8 plants m−2, respectively. Biomass per plant of either weed species was not affected by weed density when grown with soybean due to interspecific competition with soybean. Yield loss for soybean grown with A. palmeri ranged from 14% to 37% for densities of 1 to 8 plants m−2, respectively, with a maximum yield loss estimate of 49%. Similarly, predicted loss for soybean grown with D. sanguinalis was 0 % to 37% for densities of 1 to 16 m−2 with a maximum yield loss estimate of 50%. Soybean biomass was not affected by weed species or density. Results from these studies indicate that A. palmeri is more competitive than D. sanguinalis at lower densities, but that similar yield loss can occur when densities greater than 4 plants m−2 of either weed are present.

Field studies were conducted over six seasons to determine the critical period for weed control (CPWC) in high-yielding cotton, using common sunflower as a mimic weed. Common sunflower was planted with or after cotton emergence at densities of 1, 2, 5, 10, 20, and 50 plants m−2. Common sunflower was added and removed at approximately 0, 150, 300, 450, 600, 750, and 900 growing degree days (GDD) after planting. Season-long interference resulted in no harvestable cotton at densities of five or more common sunflower plants m−2. High levels of intraspecific and interspecific competition occurred at the highest weed densities, with increases in weed biomass and reductions in crop yield not proportional to the changes in weed density. Using a 5% yield-loss threshold, the CPWC extended from 43 to 615 GDD, and 20 to 1,512 GDD for one and 50 common sunflower plants m−2, respectively. These results highlight the high level of weed control required in high-yielding cotton to ensure crop losses do not exceed the cost of control.

Agronomic surveys of summer weed species are necessary to identify future research directions for optimal weed control, but usually focus on agricultural fields in a single season. To survey all species in the absence of weed control measures and determine species variability between seasons, a survey of 133 sites was conducted on roadsides adjoining agricultural fields throughout the Western Australian grainbelt in early 2015 and repeated in 2016 and 2017. The survey identified 144 species, but only 19 species were evident at more than 10% of sites. The most common species were weeping lovegrass [Eragrostis curvula (Schrad.) Nees], fleabane (Erigeron sp.), windmillgrass (Chloris truncata R. Br.), and wild radish (Raphanus raphanistrum L). The survey highlighted that weed species incidence varied between years. For example, C. truncata incidence was 30% in 2015 and 55% in 2016, while stinkgrass [Eragrostis cilianensis (All.) Vignolo ex Janch.] ranged from 20% in 2015 to 50% of sites in 2017. Conversely, density of individual species on the roadside was usually low, and density remained consistent between years. The survey highlighted multiple weed species that will require further research to optimize management programs. Raphanus raphanistrum and wild oat (Avena fatua L.) in particular are an issue for growers, as these species are highly detrimental winter weeds, and the survey demonstrates that they can also be common summer weeds. Control of these species with nonselective herbicides in summer as well as winter is likely to exacerbate the development of herbicide resistance.