The role of micro- and mesopores of archaeological ceramics in preserving ancient biomolecules is not well established. To understand the formation of these nano-sized pores in ceramics, reference pottery briquettes were made using two different clay types (illitic and kaolinitic clays), two different tempers (sand and chalk), and two different firing temperatures (600 and 800°C). The mineral content of the briquettes was determined by quantitative X-ray diffraction, and the micro- and mesopores were characterized with the N2 adsorption method. The Brunauer–Emmett–Teller method, the adsorbed volume near liquefaction, and application of non-local density functional theory (NLDFT) were used on the N2 adsorption data to determine specific surface areas, specific pore volumes, and pore-size distributions. Values of the micro- and mesoporosity parameters of most of the briquettes were approximately proportional to the initial clay content and unrelated to temper; the proportionality factors were much larger for illitic clay than for kaolinitic clay. When chalk-tempered briquettes were fired at the higher firing temperature of 800°C, the parameters were no longer proportional to the initial clay content; they decreased in most briquettes formed of illitic clay due to reaction of the clay with lime, and they increased in briquettes formed of kaolinitic clay due mostly to the porosity of unreacted lime. Micropore volumes in briquettes formed mostly of illitic clay were substantial: of the order of 5 mm3 g−1. The work presented here forms a basis for future studies to establish a plausible mechanism of organic residue absorption and preservation in ancient ceramics.

Clay minerals were used as indicators for determining the source of sediment in recently dredged harbors along the north shore of Long Island Sound. Amount and characteristics of clay minerals in sediments from the dredged channels were compared to their amount and characteristics in the surrounding soils and in sediments from Long Island Sound. Clay minerals in sediments from the channels were similar in amount and characteristics to clay minerals in sediments from Long Island Sound but differed from those in the surrounding soils in the watershed. Thus, the main source of deposits in the channels is the bottom sediment of Long Island Sound which is transported to the channels by tidal action. These conclusions are supported by recent studies of the bottom currents in the Sound.

Redox and acid-base reactions play important roles in the fate of metal contaminants in soils and sediments. The presence of significant amounts of Cr, Pb and other toxic heavy metals in contaminated soils and sediments is of great environmental concern. Oxidation states and dissolution characteristics of the heavy metals can exert negative effects on the natural environment. Atomic force microscopy (AFM) was used to follow the changes in morphology and structure of reaction products of Cr and Pb formed on mineral surfaces. Nitrate salts of Cr(III) and Pb(II) were used to replace the native exchangeable cations on muscovite and smectite surfaces and the metal-mineral systems were then reacted at different pH's and redox conditions.

For Pb, aggregate morphological forms were found at pH 6.1 and 12.4. At pH 6.1, the mean roughness value was 0.70 nm, and at pH 12.4 it was 5.30 nm. The fractal dimensions were 2.03 at pH 6.1 and 2.05 at pH 12.4. For Cr(III), both layered and aggregate morphological forms were found at pH 6.8 and 10.8. The mean roughness values were 0.90 nm at pH 6.8 and 4.3 nm at pH 10.8. Fractal dimensions for both were 2.00. The effect of redox conditions on morphological characteristics was studied on a smectite substrate. The reduced clays were more compacted than oxidized ones and the reduced clay could reduce Cr(VI) to Cr(III), forming new minerals on the surfaces.

A geochemical equilibrium model, MINTEQA2, was used to simulate the experimental conditions and predict possible reaction products. Simulation results agreed well with data from experiments, providing evidence that modeling can provide a useful “reality check” for such studies. Together, MINTEQA2 and AFM can provide important information for evaluating the morphologies and chemical reactivities of metal reaction products formed on phyllosilicate surfaces under varying environmental conditions.

Shewanella putrefaciens is a species of metal-reducing bacteria with a versatile respiratory metabolism. This study reports that S. putrefaciens strain MR-1 rapidly reduces Fe(III) within smectite clay minerals. Up to 15% of the structural Fe within ferruginous smectite (sample SWa-1, Source Clays Repository of the Clay Minerals Society) was reduced by MR-1 in 4 h, and a range of 25% to 41% of structural Fe was reduced after 6 to 12 d during culture. Conditions for which smectite reduction was optimal, that is, pH 5 to 6, at 25 to 37 °C, are consistent with an enzymatic process and not with simple chemical reduction. Smectite reduction required viable cells, and was coupled to energy generation and carbon metabolism for MR-1 cultures with smectite added as the sole electron acceptor. Iron(III) reduction catalyzed by MR-1 was inhibited under aerobic conditions, and under anaerobic conditions it was inhibited by the addition of nitrate as an alternate electron acceptor or by the metabolic inhibitors tetrachlorosali-cylanilide (TCS) or quinacrine hydrochloride. Genetic mutants of MR-1 deficient in anaerobic respiration reduced significantly less structural Fe than wild-type cells. In a minimal medium with formate or lactate as the electron donor, more than three times the amount of smectite was reduced over no-carbon controls. These data point to at least one mechanism that may be responsible for the microbial reduction of clay minerals within soils, namely, anaerobic respiration, and indicate that pure cultures of MR-1 provide an effective model system for soil scientists and mineralogists interested in clay reduction. Given the ubiquitous distribution and versatile metabolism of MR-1, these studies may have further implications for bioremediation and water quality in soils and sediments.

The bleaching of cottonseed oil by alumina-pillared (Al-pillared) acid-activated clays was investigated. Acid activation of a Ca-rich montmorillonite (CMS STx-1) following treatment with 1, 4, and 8 eq/L sulfuric-acid solutions, as well as subsequent pillaring with alumina, produces new materials. These materials have bleaching properties dependent upon the extent of activation of the clay prior to pillaring. The pillared acid-activated montmorillonites possessed higher bleaching efficiency compared to pillared products of the untreated clay. Mild activation of the montmorillonite matrix, pillaring with the Keggin ion [Al13O4(OH)24(H2O)12]7+, and calcination temperatures to 500°C produced materials with the best fractional degree of bleaching. Direct comparison to the performance of a commercial bleaching earth (Tonsil Optimum 214, Sud-Chemie AG. Moosburg, Germany) shows that the efficiency of the Al-pillared acid-activated montmorillonite may be improved. The optimization of the bleaching process is achieved via a judicious utilization of intermediate surface area, relatively high acidity, and enhanced pore volume.

Small-angle X-ray scattering (SAXS), adsorption and nuclear magnetic resonance (NMR) techniques were used to determine the fractal dimensions (D) of 3 natural reference clays: 1) a kaolinite (KGa-2); 2) a hectorite (SHCa-1), and 3) a Ca-montmorillonite (STx-1). The surfaces of these clays were found to be fractal with D values close to 2.0. This is consistent with the common description of clay mineral surfaces as smooth and planar. Some surface irregularities were observed for hectorite and Ca-montmorillonite as a result of impurities in the materials. The SAXS method generated comparable D values for KGa-2 and STx-1. These results are supported by scanning electron microscopy (SEM). The SAXS and adsorption methods were found to probe the surface irregularities of the clays while the nuclear magnetic resonance (NMR) technique seems to reflect the mass distribution of certain sites in the material. Since the surface nature of clays is responsible for their reactivity in natural systems, SAXS and adsorption techniques would be the methods of choice for their fractal characterization. Due to its wider applicable characterization size-range, the SAXS method appears to be better suited for the determination of the fractal dimensions of clay minerals.

Plane-wave pseudopotential total energy calculations have been applied to investigate the structure and energetics of the Cs/K exchange into interlayer sites in muscovite mica. Novel muscovite structures were designed to isolate the effects of 2:1 layer charge, cation size/interlayer site shape, and tetrahedral Al/Si substitutions on the exchange. All atom and cell-parameter optimizations were performed with the intention to mimic the constant pressure, non-isovolumetric exchange conditions thought to be found at frayed-edge sites. Under conditions where the cell parameters are allowed to relax, the overall Cs/K exchange reaction is surprisingly close to isoenergetic. The forward reaction is more strongly favored with increasing layer charge. For the condition of zero layer charge and no interlayer site distortion, the difference in the optimal interlayer spacing for Cs relative to K is very small, indicating a baseline indifference of the muscovite structure to cation size. The presence of 2:1 layer charge or tetrahedral rotations arising from Al/Si substitutions clearly change this outcome. Analysis of the dependence of the interlayer spacing on layer charge shows that while the spacing collapses with increasing layer charge for K as the interlayer cation, the reverse is true for Cs. We attribute the contrasting behavior to inherent differences in the ability of these cations to screen 2:1 layer-layer repulsions. Such effects might be involved during exchange at frayed-edge sites where interlayer spacings are increased. This is known, from experiment, to be very selective for Cs. Overall, the exchange energetics are so low that the Cs/K exchange rate and degree of irreversibility are likely to be dominated by diffusion kinetics.

In this paper, we use the unequal radius modified Gouy-Chapman theory to evaluate the effect of the ionic size of the electrolyte on the swelling pressures (II) in different clay systems immersed in electrolytic solutions. First the model is applied to a 1:1 electrolyte to show that the coion size is only important at surface charge densities much lower than those found in typical clay systems. The swelling pressure is calculated and the results are compared with experimental data. Literature ionic radii values are used to show the dependence of the swelling pressure on the specific counterions present. Next the model is applied to a 1:1 and 2:1 electrolyte mixture with unequal-sized counterions to show the swelling pressure is highly dependent on both counterion sizes. The unequal and same-sized cases are compared.

Jordanian natural kaolin and bentonite show good catalytic activity towards debutylating 2-tert-butylphenol, and varying debutylation vs. isomerization selectivity after acid activation. The resulting catalytic activity of these samples is dependent on the acid employed for activation; the samples treated with acetic acid showed relatively low conversions, whereas those treated with hydrochloric or phosphoric acid were found to be very active. Treatments with strong acids such as HCl have various effects on the activity of the samples depending on the concentration of the acid. For example, treatment with 1 M HCl gives the highest activity, whereas a treatment using 12 M HCl produced the lowest activity. The debutylation selectivity of the acid-activated samples is affected by the acid type and/or concentration. This selectivity ranges from 20 to 60%, whereas that of water-treated samples is between 46–82%.

Divalent tin has been intercalated into montmorillonite by reacting partially hydrolyzed solutions of SnCl2 under aerobic conditions at pH = 2.8 with aqueous dispersions of the smectite mineral. The precursor tin solution contains mainly the cationic trimeric ion Sn3(OH)42+, which is shown to take part in the exchange reactions with the surface cations of the mineral. Variable temperature Mössbauer spectroscopy was used in order to: 1) directly probe changes in the oxidation state and coordination environment of Sn2+ in the process of intercalation; 2) examine the nature of tin atoms on the external surfaces and in the interlayer space of the clay platelets; and 3) study the dynamics of motion of tin atoms on the clay surfaces.

The main conclusion from these studies is that about 75% of the Sn2+ ions undergo extensive oxidation to the +4 state with concomitant hydrolysis and condensation that lead to the precipitation of SnO2 on the external surfaces of the clay. The rest of the Sn2+ ions are introduced into the lamellar zone, as evidenced by the detailed Mössbauer analysis of the dynamics of motion of tin atoms on the clay surfaces.

Homoionic Ca-saturated clay pastes were prepared and drying curves were obtained by applying suction pressures from 1 kPa to 100 MPa, A transmission device was used to study particle orientation by placing the clay in a cell specially designed to obtain diagrams corresponding to different sample orientations. The 00l and hk0 reflections were compared to determine the best reflections for studying clay-particle orientation. Depending on the clay, 00/ reflections or the 020 reflection and/or hkl bands can be used to analyze orientation. In many cases the 020 reflection is preferred because the intensity of the peak is high and appears to be independent of the H2O content and the degree of stacking order of layers along the [001] direction.

For interstratified clays, the conditions required to obtain 00l reflections depended on several factors, the most important of which is the water content. Also, the intensity relating to particie orientation depends on (1) particle extension (size) in the (001) plane and (2) the crystal structure. Illite crystals of <1000 A gave a poorly oriented clay matrix. In contrast, large aggregates of illite, smectite, and kaolinite particles (>10,000 Å) showed a strongly oriented system. The particles of smectites may be curved and the dry material was poorly oriented owing to weak cohesion forces between the layers in comparison to illite.

The study of the orientation of particles by X-ray diffraction on hydrated samples may be affected by sample mounting techniques. Any change in the content or the way the sample is mounted may modify the microstructure of a material.

Clay containing a high water content affects the disorientation of particles, whereas, for the dry samples, pore size, pore volume, and solid continuity are associated with the geometry and crystal structure of the clay matrix.

The long-term impermeability of clay barriers in waste disposal facilities and hydraulic structures is of critical importance to environmental, agricultural, and industrial concerns. Changes in the oxidation state of Fe in the constituent clays of compacted clay barriers may degrade the hydraulic conductivity of these structures because other properties related to hydraulic conductivity, such as swelling, gel microstructure, and particle size, are greatly altered by the oxidation state. Two Na-saturated smectites (SWa-1 and API 25) were reduced by sodium dithionite (Na2S2O4), both in suspension and in situ after consolidation, to examine the effects of structural Fe reduction on hydraulic conductivity. Results indicated that the hydraulic conductivity depended on both the oxidation state and the consolidation history of the clay. The hydraulic conductivity of clay reduced in suspension before consolidation was lower than that of oxidized clay. Initially reduced smectite, thus, may be compactable to a less-permeable material with higher bulk density. But reduction of smectite in situ after consolidation increased the hydraulic conductivity and its variability. The oxidized state of clay liners should, therefore, be preserved.

A reservoir rock is a porous geological formation in contact with 2 liquids, brine and oil. An improved knowledge of rock wettability is of primary importance to estimate the amount of crude oil in underground resources. The petroleum industries have observed that wettability contrasts in sedimentary reservoir rocks are largely correlated to the presence of clays, illite and/or kaolinite in the rocks’ intergranular space.

More precisely, the grain surfaces of illite show a preference for brine. Kaolinite preferentially adsorbs oil, which imparts its hydrophobic characteristics to the mineral surface. Using X-ray absorption spectroscopy (XAS) and Fourier transform infrared (FTIR) spectroscopy, we studied the adsorption process of asphaltenes in the presence of water at the microscopic level. We demonstrate experimentally that the wettability contrasts observed in kaolinite and illite are related to structural differences between these 2 clays, and we show the role of the grain surface hydroxyls. With clay materials, the purity of the samples is the most important limitation of the quantitative use of extended X-ray absorption fine structure (EXAFS).

The oxidation state of structural iron greatly influences the physical-chemical properties of clay minerals, a phenomenon that may have significant implications for pollutant fate in the environment, for agricultural productivity, and for industrial uses of clays. Knowledge of redox mechanisms is fundamental to understanding the underlying basis for iron's effects on clays. Past studies revealed that the extent of Fe reduction varied depending on the reducing agent used, but this variation may not have been a simple function of the reduction potential of the reducing agent. The objective of this study was to identify the relationship between the Fe reduction mechanism and free radical activity in the reducing agent. Several reducing agents and their mixtures with the Na-saturated, 0.5 to 2 μm size fraction of ferruginous smectite (SWa-1) were analyzed by electron spin resonance (ESR) spectroscopy to determine the presence of unpaired electrons or free radicals. Only Na2S2O4 exhibited paramagnetic free-radical behavior with a signal at about g = 2.011, which was attributed to the sulphoxylate (S02− ·) free radical. The free radical was labile in aqueous solution, and the ability of Na2S2O4 solution to reduce structural Fe in the smectite decreased with age of the solution and paralleled the disappearance of the free radical signal in the ESR spectrum. The paramagnetic species was preserved and enhanced if Na2S2O4 was added to the clay suspension, indicating that either the clay surface stabilized the SO2− · radical or the additional unpaired electrons were produced in the clay structure.

The reactivity and stability of the edge faces of swelling clay minerals can be altered by layer charge and the stacking structure; however, these effects are poorly understood due to experimental limitations. The structure and stability of the montmorillonite {110}, {010}, {100}, and {130} edge faces with a layer charge of either y = 0.50 or y = 0.33 (e−/Si4O10) were investigated using first-principles calculations based on density functional theory. Stacked- and single-layer models were tested and compared to understand the effect of stacking on the stability of montmorillonite edge faces. Most stacked layers stabilize the edge faces by creating hydrogen bonds between the layers; therefore, the surface energy of the layers in the stacked-layer model is lower than in the single-layer model. This indicates that the estimates of edge face surface energy should consider the swelling conditions. Negative surface energies were calculated for these edge faces in the presence of chemisorbed water molecules. A high layer charge of 0.50 reduced the surface energy relative to that of the low layer charge of 0.33. The isomorphic substitution of Mg for Al increased the stability of interlayer Na ion positions, which were stable in the trigonal ring next to the Mg ions. The lowest surface energies of the {010} and {130} edge faces were characterized by the presence of Mg ions on edge faces, which had a strong cation adsorption site due to the local negative charge of the edges. The coordination numbers of O atoms around cations adsorbed to these edge faces were small in comparison to interlayers without water.

The varied mineralogical composition of earthy materials and the quantity of elements extracted by simulated stomach acid substantiate the diversity of materials consumed by humans practicing geophagy. Direct consumption of ‘edible earths’ for medicinal and spiritual purposes occurs worldwide and is deeply rooted in ‘folk medicine’ and religion. The legends associated with the healing powers of the clay from Chimayo, New Mexico, provide an excellent example of the roots of geophagy. The clay mineral assemblages revealed by X-ray diffraction analysis of 22 samples from New Mexico, North America, and other parts of the world are highly variable. One might be monominerallic kaolinite or smectite, and another, a complex mixture of illite, kaolinite, smectite, and chlorite or vermiculite. The quantities of elements (Al, Si, K, Na, Ca, Mg, Fe, Mn, Ti, P, S, Ba, Sr, Pb, Zn, Cd, Co, Cu, Cr, Ni, V, Zr, Se, Mo, Be, Sb, and As) extracted by 0.12 M HCl varied from ∼1.0 mg/g to the limit of detectability, 0.0001 mg/g. Potential long-term human health effects were evaluated with the Reference Dose Ratio (RDR). It divides the quantity of the element extracted from 50 g of the total sample by the recommended reference dose (RfD) reported in the Environmental Protection Agency’s (EPA, USA) IRIS (Integrated Risk Information System) database. Median RDR values for Na, Cr, Sb, and As exceeded 1.0 indicating an abnormally high potential intake. Materials consumed by humans are so varied that caution should be used in comparing the results of one clay study with those of another without mineralogical and chemical data.

The mechanism of formation of detrital, beidellite-rich clay occurring in the Agadir basin (Morocco) is well documented, but its detailed characterization is incomplete which limits its application. The aim of the present study was to provide further details of the mineralogical and physico-chemical characteristics of this clay. Bulk raw clay and its Na+-saturated, <2 μm fraction were characterized using chemical, structural, and thermal techniques. Measurements of induced streaming potential (e.g. particle charge) and of specific surface area and porous volume are reported. The raw clay contained carbonate and quartz as associated minerals along with phyllosilicates (<2 μm particle size). X-ray diffraction and scanning electron microscopy analyses showed that the <2 μm fraction was dominated by a dioctahedral smectite. Because dehydroxylation of this mineral occurred at 510°C, and because it re-expanded in ethylene glycol after Li+-saturation followed by heating at 240°C for 24 h, the mineral was shown to be a beidellite rather than montmorillonite. This assertion was further supported by 27Al and 29Si magic-angle spinning nuclear magnetic resonance spectra showing predominantly negative charges in the tetrahedral sheets due to notable Al-for-Si substitutions. The chemical composition of the <2 μm fraction showed an Fe2O3 content which was ~7.52 wt.% greater than those of other beidellite occurrences but not so much that it would be identified as a nontronite. The absence of stretching and bending absorption bands corresponding to characteristic (Fe2OH) units in mid-infrared spectra and their corresponding fundamental overtones or combination bands in near-infrared spectra supported this notion. The structural formula of the beidellite in the present study was determined to be (Si7.51Al0.49)(Al2.99Fe0.68Mg0.33) (Ca0.03Na0.54Mg0.11)O20(OH)4, having dioctahedral ferruginous characteristics with almost 60% of the negative charge found in tetrahedral sheets. The cation exchange capacity determined from the structural formula was ~108 meq/100 g. The specific surface area and total pore volume were ~82.2 m2/g and 0.136 cm3/g, respectively. Interestingly, a detrital rather than a hydrothermal-alteration origin, as reported for other beidellite occurrences, explains its natural abundance and emphasizes the great interest in it.

The aqueous chemistry of water films confined between clay mineral surfaces remains an important unknown in predictions of radioelement migration from radioactive waste repositories. This issue is particularly important in the case of long-lived anionic radioisotopes (129I-, 99TcO4-, 36Cl-) which interact with clay minerals primarily by anion exclusion. For example, models of ion migration in clayey media do not agree as to whether anions are completely or partially excluded from clay interlayer nanopores. In the present study, this key issue was addressed for Cl- using MD simulations for a range of nanopore widths (6 to 15 Å) overlapping the range of average pore widths that exists in engineered clay barriers. The MD simulation results were compared with the predictions of a thermodynamic model (Donnan Equilibrium model) and two pore-scale models based on the Poisson-Boltzmann equation under the assumption that interlayer water behaves as bulk liquid water. The simulations confirmed that anion exclusion from clay interlayers is greater than predicted by the pore-scale models, particularly at the smallest pore size examined. This greater anion exclusion stems from Cl- being more weakly solvated in nano-confined water than it is in bulk liquid water. Anion exclusion predictions based on the Poisson-Boltzmann equation were consistent with the MD simulation results, however, if the predictions included an ion closest approach distance to the clay mineral surface on the order of 2.0 ± 0.8 Å. These findings suggest that clay interlayers approach a state of complete anion exclusion (hence, ideal semi-permeable membrane properties) at a pore width of 4.2 ± 1.5 Å.

Np and Pu are two important actinides of concern for the safe long-term disposal of nuclear waste. Both actinides are, in addition, constituents of global nuclear fallout. Investigation of their environmental behavior requires ultra-sensitive analytical methods, but current methods for a concurrent determination in clay minerals are lacking. In the present study, a Pu isotope was investigated for use as a non-isotopic yield tracer for Np in extraction, purification, and mass spectrometric determination of Np and Pu isotopes in clay materials. Inductively coupled plasma mass spectrometry was used in this developmental study, but the method is intended for future ultra-trace analysis of global-fallout Np and Pu in clay-rich soil materials by the more sensitive accelerator mass spectrometry. Another field of application may be the investigation of diffusion patterns of actinides in compacted clay liners and potential host rocks for radioactive waste disposal. The analytical procedure includes the following steps: (1) extraction of Np and Pu from clay samples; (2) adjustment of Np and Pu to Np(IV) and Pu(III); (3) pre-concentration of Np and Pu by co-precipitation with iron hydroxide; (4) adjustment of Pu to Pu(IV); (5) extraction chromatographic separation of Pu and Np from iron and matrix elements; and (6) determination of Np and Pu by mass spectrometry. The analytical procedure was applied successfully to spiked montmorillonite and illite test portions of up to 1 g. High chemical yields near 90% were obtained for both Np and Pu. The suitability of Pu as a non-isotopic tracer for Np was indicated by Np/Pu chemical yield ratios close to unity. Accurate pH adjustment during the reductive co-precipitation and short processing times are vital to obtain high chemical yields and Np/Pu yield ratios close to unity.