Industrial hemp is a multipurpose crop cultivated for fiber, seed, human food, and animal feed. Hemp legalization in Texas creates a considerable potential to increase its acreage in semi-arid conditions; however, knowledge is limited on growing hemp optimally in Texas. Best management practices, including weed control, require evaluation for profitable hemp production. As little is known about the herbicide tolerance of hemp, field studies were conducted to test several soil-residual herbicides with different modes of action for phytotoxicity to two hemp cultivars, ‘Yuma’ and ‘Jinma’. The experimental units were randomized three times in a blocked split-plot design with hemp cultivars in the main plots and soil-residual herbicides in the subplots. Ethalfluralin, the mixture of sulfentrazone and S-metolachlor, prometryn, and S-metolachlor, resulted in 60% to 90% and 73% to 100% weed control as compared to the nontreated control in 2021 and 2022, respectively. The highest hemp germination, stand count, and plant height were observed with ethalfluralin and S-metolachlor herbicides; however, no significant differences were observed for hemp germination and plant height compared to the nontreated control. S-metolachlor, ethalfluralin, fomesafen, and prometryn resulted in similar hemp biomass compared to the nontreated control. Overall, the results indicate that hemp is tolerant to ethalfluralin, prometryn, and S-metolachlor, and these soil-residual herbicides were effective for weed control in hemp. The mixture of bicyclopyrone plus S-metolachlor, metribuzin plus S-metolachlor, and mesotrione should be avoided, as they caused significant injury to hemp plants. Future research is needed to test the efficacy of different preemergence and postemergence herbicides that can be used in industrial hemp grown under different environments, making sure the delta-9-tetrahydrocannabinol content of the hemp is below the legal content restrictions.

Soil-applied herbicides are important for controlling weeds in many crops but risk damage to susceptible rotational crops if they persist. Field studies were conducted in Powell, WY, from 2015 through 2017 to evaluate the effect of reduced water availability on soil-applied herbicide dissipation. Eight soil-applied herbicides, applied to dry bean or corn, were exposed to three season-long irrigation treatments (100%, 85%, and 70% of estimated crop evapotranspiration [ETc]) by overhead sprinkler. Soil samples were collected to a depth of 10 cm from 0 to 140 d after application, and soil herbicide concentrations were quantified using gas or liquid chromatography and mass spectrometry. Herbicide concentrations were regressed over time to produce a soil half-life estimate for each herbicide and irrigation treatment. Reduced irrigation decreased dry bean yield by up to 77% and corn yield by up to 50%. After adjusting for precipitation, the lowest irrigation treatment received 78% and 76% as much water as the full irrigation treatment in 2015 and 2016, respectively. This significantly increased the soil half-life of imazethapyr but did not increase the soil half-life of atrazine, pyroxasulfone, saflufenacil, ethalfluralin, trifluralin, or pendimethalin. Reduced irrigation did not increase carryover injury to rotational crops from these herbicides 1 yr after application. Instead, carryover response was determined by the inherent persistence of individual herbicides. Imazethapyr (0.1 kg ai ha−1) injured rotational sugar beet, and isoxaflutole (0.1 kg ai ha−1) injured rotational dry bean. Pyroxasulfone (0.2 kg ai ha−1), atrazine (2.0 kg ai ha−1), saflufenacil (0.1 kg ai ha−1) + dimethenamid-P (0.6 kg ai ha−1), ethalfluralin (0.8 kg ai ha−1), trifluralin (0.6 kg ai ha−1), and pendimethalin (1.1 kg ai ha−1) did not injure rotational crops regardless of irrigation treatment. Drought stress sufficient to cause up to 77% crop yield loss did not increase soil-applied herbicide carryover.

Weed management in cantaloupe and other melon crops is important to maximize fruit yield; however, there are few registered herbicides available in California. Several independent herbicide trials were conducted at University of California field stations in Davis (Yolo County), Five Points (Fresno County), and Holtville (Imperial County) from 2013 to 2019 to evaluate both registered and unregistered herbicides and incorporation methods (sprinklers, cultivation, or none) for crop safety and weed control in melons. Although specific treatments varied among locations depending on local practice and research objectives, ethalfluralin and halosulfuron were used in all experiments, and bensulide and S-metolachlor were evaluated in 4 of 6 site-years. Additional herbicides included clethodim, clomazone, DCPA, napropamide, pendimethalin, sethoxydim, and sulfentrazone. Among registered herbicides, halosulfuron, halosulfuron + ethalfluralin, and ethalfluralin + bensulide combinations provided consistently beneficial weed control across all site-years compared to the nontreated control. S-metolachlor performed as well as the best of the registered herbicides tested at each site-year; although moderate injury was noted at the Davis location, this did not reduce melon yield. The method used to incorporate preplant herbicides had a significant impact on weed control efficacy but varied by location. Mechanical incorporation of preplant herbicides resulted in improved weed control and yield compared to sprinklers. Early-season weed control, whether by herbicides or hand weeding, resulted in significant yield increase in most site-years.

Late-emerging summer annual weeds are difficult to control in dry bean production fields. Dry bean is a poor competitor with weeds, due to its slow rate of growth and delayed canopy formation. Palmer amaranth is particularly difficult to control due to season-long emergence and resistance to acetolactate synthase (ALS)-inhibiting herbicides. Dry bean growers rely on PPI and preemergence residual herbicides for the foundation of their weed control programs; however, postemergence herbicides are often needed for season-long weed control. The objective of this experiment was to evaluate effect of planting date and herbicide program on late-season weed control in dry bean in western Nebraska. Field experiments were conducted in 2017 and 2018 near Scottsbluff, NE. The experiment was arranged in a split-plot design, with planting date and herbicide program as main-plot and subplot factors, respectively. Delayed planting was represented by a delay of 15 d after standard planting time. The treatments EPTC + ethalfluralin, EPTC + ethalfluralin followed by (fb) imazamox + bentazon, and pendimethalin + dimethenamid-P fb imazamox + bentazon, resulted in the lowest Palmer amaranth density at 3 wk after treatment and the highest dry bean yield. The imazamox + bentazon treatment provided poor Palmer amaranth control and did not consistently result in Palmer amaranth density and biomass reduction compared with the nontreated control. In 2018, the delayed planting treatment had reduced Palmer amaranth biomass with the pendimethalin + dimethenamid-P treatment, as compared with standard planting. Delaying planting did not reduce dry bean yield and had limited benefit in improving weed control in dry bean.

Field trials were conducted in 2016 and 2017 at the Southwest Purdue Agricultural Center in Vincennes, IN, to determine the tolerance of plasticulture-grown ‘Fascination’ triploid watermelon to flumioxazin. Treatments were applied after plastic was laid, but 1 d prior to transplanting, and consisted of row middle applications of clomazone (210 g ai ha−1) plus ethafluralin (672 g ai ha−1), flumioxazin (107 g ai ha−1), and flumioxazin (88 g ha−1) plus pyroxasulfone (112 g ai ha−1); a broadcast application of flumioxazin (107 g ha−1); and a nontreated check. The broadcast application of flumioxazin reduced watermelon vine length and normalized difference vegetation index (NDVI) values compared with values for the nontreated check. All other herbicide treatments had vine length and NDVI values similar to those of the nontreated check. At 25/26 d after transplanting (DAP), weedy ground cover in row middles of the nontreated check was 39% and 14% in 2016 and 2017, respectively. Weedy ground cover in herbicide-containing treatments was significantly less, at ≤7% and ≤5% in 2016 and 2017, respectively. Marketable watermelon yield of the nontreated check was 77,931 kg and 11,115 fruits ha−1. The broadcast application of flumioxazin resulted in reduced marketable yield (64,894 kg ha−1) and fewer fruit (9,550 ha−1).

Field experiments were conducted in 2016 and 2017 to evaluate the effects of seeding rate and herbicide programs on weed control and pinto bean yield under irrigation. The experiments comprised a 5 × 5 factorial randomized complete block design with five replications. The weed control treatments comprised a nontreated control, hand-weeded control, EPTC + ethalfluralin PRE, EPTC + ethalfluralin PRE followed by (fb) dimethenamid-P POST at V1, and EPTC + ethalfluralin PRE fb bentazon/imazamox POST. There were five seeding rates ranging from 247,000 to 494,000 seeds ha–1 planted in 19-cm rows. Weed biomass was reduced by 6 kg ha–1 with every additional 1,000 seeds ha–1. EPTC plus ethalfluralin fb either dimethenamid-P or bentazon plus imazamox reduced weed biomass by at least 29% compared to the nontreated control. There was a significant effect of weed control treatment on pinto bean yield (P = 0.0004). However, there was no significant seeding rate (P = 0.42) or seeding rate–by–weed control interaction effect on pinto bean yield (P = 0.38). Pinto bean yield ranged from 3,080 kg ha–1 in the nontreated control to 4,740 kg ha–1 hand-weeded treatment. Increased seeding rate in narrow rows is a cultural practice that can improve weed control in pinto bean but may not necessarily increase yield.

Residual herbicides remain the primary tool for efficient weed control in cucurbit crops because of the lack of crop tolerance to many POST herbicide options. Field experiments were conducted in New Jersey in 2018 and 2019 to determine weed control efficacy and tolerance of direct-seeded cucumber ‘Python’ and summer squash ‘Gold Prize’ to S-metolachlor applied at 0.7 or 1.4 kg ai ha−1 at planting (PRE) or when crops reached the second- to third-leaf stage (EPOST). Regardless of applied rate, S-metolachlor PRE or EPOST provided 96% to 100% control 3 wk after planting (WAP) of smooth pigweed, large crabgrass, and giant foxtail. S-metolachlor PRE significantly improved American black nightshade and carpetweed control 3 WAP with respect to bensulide, and smooth pigweed with respect to clomazone + ethalfluralin. Summer squash showed excellent tolerance, regardless of S-metolachlor rate or timing of application, with stunting not exceeding 17% 4 WAP and 3% 7 WAP at the 1.4 kg ha−1 rate. Marketable yield decreased by 15% with S-metolachlor PRE or POST at 1.4 kg ha−1 with respect to clomazone + ethalfluralin, a reduction not noted when comparing with bensulide or the handweeded control. Marketable fruit number plant−1 and individual fruit weight were not affected by S-metolachlor applications. Conversely, cucumber was more sensitive to S-metolachlor than summer squash was with 30% seedling emergence reduction and 36% to 43% stunting 4 WAP when S-metolachlor was applied PRE at 1.4 kg ha−1. EPOST application resulted in 15% to 26% cucumber injury 1 wk after treatment. Marketable yield declined by 21% and 39% with the 0.7 and 1.4 kg ha−1 rates of S-metolachlor, respectively, compared with clomazone + ethalfluralin. Therefore, S-metolachlor may be a novel alternative to already labeled residual herbicides for summer squash, but unacceptable injury and yield reduction do not support its registration on cucumber.

Field studies were conducted from 2009 through 2011 at the Sustainable Agriculture Research and Extension Center near Lingle, Wyoming, to evaluate great northern bean response to PRE flumioxazin mixed with either trifluralin, pendimethalin, or ethalfluralin. Seven treatments were arranged in a randomized complete block with three or four replicates y−1. The soil texture of the study site was loam in 2009 and 2011, and sandy loam in 2010. Soil organic matter ranged from 1.4% to 1.8%. Treatments included flumioxazin plus trifluralin, flumioxazin plus pendimethalin, flumioxazin plus ethalfluralin, ethalfluralin plus EPTC, imazamox plus bentazon (POST), hand-weeded control, and nontreated control. Dry bean density 4 wk after planting differed among herbicide treatments (P < 0.001). Treatments that included flumioxazin reduced dry bean density 54% compared with treatments without flumioxazin. Dry bean yield was influenced by dry bean density; on average, yield in flumioxazin-containing herbicide treatments was 30% less than treatments not containing flumioxazin, even though weed control was generally greater in flumioxazin treatments.

Residual herbicides are routinely applied to control troublesome weeds in pumpkin production. Fluridone and acetochlor, Groups 12 and 15 herbicides, respectively, provide broad-spectrum PRE weed control. Field research was conducted in Virginia and New Jersey to evaluate pumpkin tolerance and weed control to PRE herbicides. Treatments consisted of fomesafen at two rates, ethalfluralin, clomazone, halosulfuron, fluridone, S-metolachlor, acetochlor emulsifiable concentrate (EC), acetochlor microencapsulated (ME), and no herbicide. At one site, fluridone, acetochlor EC, acetochlor ME, and halosulfuron injured pumpkin 81%, 39%, 34%, and 35%, respectively, at 14 d after planting (DAP); crop injury at the second site was 40%, 8%, 19%, and 33%, respectively. Differences in injury between the two sites may have been due to the amount and timing of rainfall after herbicides were applied. Fluridone provided 91% control of ivyleaf morningglory and 100% control of common ragweed at 28 DAP. Acetochlor EC controlled redroot pigweed 100%. Pumpkin treated with S-metolachlor produced the most yield (10,764 fruits ha–1) despite broadcasting over the planted row; labeling requires a directed application to row-middles. A separate study specifically evaluated fluridone applied PRE at 42, 84, 126, 168, 252, 336, and 672 g ai ha–1. Fluridone resulted in pumpkin injury ≥95% when applied at rates of ≥168 g ai ha–1; significant yield loss was noted when the herbicide was applied at rates >42 g ai ha–1. We concluded that fluridone and acetochlor formulations are unacceptable candidates for pumpkin production.

Research from the 1980s reported sweep cultivation being a cost-effective component in an integrated system to manage weeds in peanut. Previous weed management research conducted on organic peanut indicated that repeated cultivation with a tine weeder was an effective component in that production system. Studies were conducted in Tifton, GA, from 2014 through 2017 to determine whether tine weeding can be integrated with herbicides in conventional peanut production to supplement herbicides. Experiments evaluated a factorial arrangement of eight herbicide combinations and two levels of cultivation using a tine weeder. Herbicides were labeled rates of ethalfluralin PRE, S-metolachlor PRE, imazapic POST, ethalfluralin PRE + S-metolachlor PRE, ethalfluralin PRE + imazapic POST, S-metolachlor PRE + imazapic POST, ethalfluralin PRE + S-metolachlor PRE + imazapic POST, and a nontreated control. The herbicides chosen were based on knowledge of the weed species composition at the research sites and their common use in peanut. Cultivation regimes were cultivation with a tine weeder (six times at weekly intervals) and a noncultivated control. Benefits of tine weeding supplementing control from herbicides varied according to herbicide and weed species. For example, annual grasses were effectively controlled (88% to 97%) by ethalfluralin or S-metolachlor and did not need cultivation to supplement control provided by the herbicides. However, imazapic alone did not effectively control (54% to 75%) annual grasses and needed supplemental control from cultivation with the tine weeder. Similarly, imazapic effectively controlled (84% to 93%) smallflower morningglory and did not require cultivation to supplement control from the herbicide. However, cultivation with the tine weeder improved smallflower morningglory control (76% to 95%) when supplementing ethalfluralin or S-metolachlor. Peanut yields did not respond to any of the herbicide combinations integrated with cultivation using the tine weeder. During the time period when peanut was cultivated, there was greater total rainfall and more days of rainfall events in 2014 and 2017 compared with the other years. Rainfall and wet soils reduced the performance and weed control benefits of the tine weeder. This highlights the risk of depending on cultivation for weed control.

Broadleaf weed control ranged from 80% with clomazone at 0.14 kg/ha to 100% with clomazone at 1.12 kg/ha. Broadleaf weed control was higher with clomazone than naptalam or ethalfluralin. The combination of clomazone at 0.14 kg/ha and naptalam at 5 kg/ha or ethalfluralin at 1.25 kg/ha gave more than 90% broadleaf weed control. Clomazone caused chlorosis and bleaching on cucumber leaves but plants rapidly recovered. Cucumber yields were higher in plots treated with clomazone alone at 0.14 to 0.56 kg/ha than with ethalfluralin or naptalam alone. Clomazone dose response studies were conducted in weed-free plots with five cucumber varieties. The 0.28 kg/ha rate caused low levels of visible injury and did not decrease yields. Cultivar differences were more pronounced at higher clomazone rates. The five cucumber cultivars were, in order of increasing clomazone tolerance, ‘Sunre 3537,’ ‘Pioneer,’ ‘Quest,’ ‘Prince,’ and ‘Calypso.’ We concluded that clomazone is an effective and selective herbicide for broadleaf weed control in pickling cucumber.

Field studies were conducted from 1995 to 1997 near Tifton, GA, to determine the benefits of stale seedbed weed control in cucumber. Three stale seedbed management systems—(1) power till stale seedbeds twice (2 ×), (2) glyphosate application immediately after planting, and (3) combination system of stale seedbeds power tilled once 2 wk prior to planting followed by glyphosate application immediately after planting cucumber—were evaluated as main plots. Subplots were weed management systems after planting cucumber: intensive, basic, and cultivation alone. Weed densities were generally greater in 1996 and 1997 than in 1995. Yellow nutsedge was the overall predominant species in 1995 (46 plants m−2), with Florida pusley being the predominant species in 1996 and 1997, at 80 and 124 plants m−2, respectively. Generally, stale seedbeds shallow tilled 2 × had fewer weeds and greater cucumber yields than stale seedbeds treated with glyphosate. Glyphosate did not adequately control emerged Florida pusley on stale seedbeds, resulting in reduced cucumber yield. Clomazone preemergence and bentazon/halosulfuron postemergence were used for broadleaf weed control in the intensive weed management system. These herbicides injured cucumber plants, delayed maturity, and reduced yield. Based on our results, stale seedbeds shallow tilled 2 × can be integrated into cucumber production and provide effective cultural weed control. Furthermore, these systems will replace the need for potentially injurious herbicides.

The response of sweet white lupin to several herbicides was evaluated over five years at Charlottetown, Prince Edward Island (PEI) and two years at Cornhill, New Brunswick (NB). Excellent crop tolerance was found to the herbicides: chloramben, ethalfluralin, fluazifop-P, linuron, metobromuron, metolachlor, and trifluralin. None of the above herbicides affected crop grain yield or 1000 seed weight. Sweet white lupin was slightly injured by metribuzin at 500 g ai/ha but yields and 1000 seed weight were not affected. Higher rates of metribuzin reduced lupin yield and 1000 seed weight. Imazethapyr applied POST with 0.25% v/v Agral 90 and 1.0% v/v 28% N fertilizer caused severe crop injury and reduced lupin yields.

Field experiments conducted in 1988 and 1989 evaluated clomazone alone and in a systems approach for weed control in peanut. Clomazone PPI at 0.8 kg ai/ha controlled common ragweed, prickly sida, spurred anoda, and tropic croton better than ethalfluralin and/or metolachlor applied PPI. POST application of acifluorfen plus bentazon was not needed to control these weeds when clomazone was used. Acifluorfen plus bentazon improved control of these weeds when clomazone was not used and generally were necessary to obtain peanut yields regardless of the soil-applied herbicides. Alachlor PRE did not improve clomazone control of any weed species evaluated. Fall panicum and large crabgrass control was similar with clomazone or clomazone plus ethalfluralin.

Field studies were conducted to identify herbicides suitable for improved control of hairy nightshade, redroot pigweed, and common lambsquarters in pinto beans. Fomesafen at 0.25 kg ai ha-1 did not adequately control these weeds. Clomazone at 0.5 kg ai ha-1 controlled common lambsquarters but only suppressed the growth of redroot pigweed and hairy nightshade. Ethalfluralin at 0.84 to 1.1 kg ai ha-1 gave excellent initial control of these weeds but did not control later flushes of hairy nightshade. Imazethapyr applied PPI or POST at 50 to 75 g ai ha-1 controlled hairy nightshade, redroot pigweed, and common lambsquarters throughout the growing season. Imazethapyr combined with ethalfluralin gave superior weed control and resulted in greater yields than the most commonly used herbicides in pinto beans in western Canada.

We compared applications of trifluralin or ethalfluralin granules incorporated with a sweep plow or pendimethalin (ec) applied without incorporation to incorporating trifluralin (ec) by tandem-disk harrowing for sunflower production. The study was established in winter wheat stubble at three sites in the northern and central Great Plains. Crop residues on the soil surface following sunflower planting was greater than 30% (level required to protect soil from erosion) with all conservation-tillage strategies, but not with disk incorporation. Weed control and sunflower seed yield with conservation-tillage strategies were similar to the disk incorporation practice, demonstrating that producers can use these strategies for sunflower production and to protect soil from erosion.

Field studies were conducted at five locations in North Carolina and Virginia in 1996 and 1997 to evaluate weed control and peanut (Arachis hypogaea) response to diclosulam that was applied preemergence (PRE) and in systems with commercial standards. All plots received a preplant incorporated (PPI) treatment of ethalfluralin at 840 g ai/ha. Diclosulam controlled common lambsquarters (Chenopodium album L.), eclipta (Eclipta prostrata L.), entireleaf morningglory (Ipomoea hederacea var. integriuscula Gray), ivyleaf morningglory [Ipomoea hederacea (L.) Jacq.], pitted morningglory (Ipomoea lacunosa L.), and prickly sida (Sida spinosa L.) as well as and frequently better than the commercial standards of acifluorfen plus bentazon applied postemergence (POST), paraquat plus bentazon early POST followed by (fb) imazapic POST, or imazapic POST. Systems with ethalfluralin PPI plus diclosulam PRE at 26 g ai/ha fb acifluorfen plus bentazon POST controlled a broader spectrum of weeds and yielded greater than systems of ethalfluralin PPI fb imazapic POST or ethalfluralin PPI fb acifluorfen plus bentazon POST. Peanut exhibited excellent tolerance to diclosulam PRE at 17, 26, or 35 g/ha.

Field studies were conducted to determine if oxyfluorfen alone or combined with other herbicides could be applied between black polyethylene mulch without injuring muskmelon. Oxyfluorfen at rates up to 1.1 kg ai/ha did not injure muskmelon provided adequate rain or irrigation occurred to incorporate the oxyfluorfen thereby minimizing vapors that could injure muskmelon. Using this practice, muskmelon yields from oxyfluorfen-treated plots were the same as yields from untreated cultivated plots.

Field studies were conducted near Sparr, FL, in 2001 and 2002 to evaluate the response of ‘Valencia 102’ grown for the green peanut market (or boiling peanut) to preemergence (PRE) and postemergence (POST) applications of herbicides registered for dry peanut production (roasted market). Green peanut exhibited excellent tolerance to most PRE and POST treatments. There was minimal injury (8%) from flumioxazin applications when evaluated early season in both years, and peanut quickly recovered. Norflurazon caused chlorosis to peanut foliage (23%) in both years. Yield reduction was observed in 2001 for flumioxazin (15%), metolachlor (20%), and norflurazon (41%) compared with the untreated control. However, there were no yield reductions for any of the PRE treatments in 2002. Bentazon + paraquat early postemergence (EPOST) followed by (fb) 2,4-DB POST, bentazon + paraquat EPOST fb clethodim POST, and imazapic EPOST caused ≤5% injury and had no effect on yield in either year.

Studies were conducted to determine injury potential to rotational crops from carryover of herbicides used in watermelon production. Treatments included halosulfuron, ethalfluralin, and sulfentrazone alone; halosulfuron in tank mixtures with bensulide, clomazone, ethalfluralin, and naptalam; and a tank mixture of naptalam and bensulide. Sulfentrazone applied at 224 g ai/ha to watermelon severely reduced spinach emergence, but did not reduce emergence of broccoli, cabbage, or wheat. Residues of sulfentrazone applied to watermelon at 450 g/ha stunted growth of broccoli and cabbage and was the only treatment that reduced wheat stand. Injury to broccoli, cabbage, and spinach increased as the halosulfuron rate increased. Ethalfluralin did not reduce stand or cause injury to any of the four rotational crops. Naptalam plus bensulide did not reduce stand of the four crops and caused either slight or no injury. Residues of sulfentrazone and halosulfuron can injure vegetables following crops in which these herbicides are used, and caution should be taken particularly with spinach, broccoli, and cabbage in this respect.