Transformation of kaolinite to dickite is a common diagenetic reaction. The present report is part of a wider study to investigate the pathways of this polytype change. Fourier-transform infrared spectroscopy (FTIR) was used to attempt quantification of the relative proportions of kaolinite and dickite, validated by X-ray diffraction (XRD) results, in order to link mineral and structural features during the mineralogical changes. A group of kaolinite and dickite samples was investigated: 13 samples from the Frøy and Rind oil fields (North Sea), three kaolinite specimens with different crystal order and particle size (KGa-2, kaolinite API 17, Keokuk kaolinite), and two dickite-rich samples (Natural History Museum collection). Six FTIR spectral features were analyzed: (1) intensity ratio of the minima at 3675 and 3635 cm−1; (2) position of the band at ~1115 cm−1; (3) difference between the frequency of the bands at ~1030 and ~1000 cm−1; (4) intensity ratio of the bands generating shoulders at ~922 and ~900 cm−1; (5) position of the band at ~370 cm−1; and (6) intensity of the band at ~268 cm−1. Correlation of the features above with polytype relative proportions derived from XRD showed non-linear behavior, with maximum curvature at the dickite end, which precludes kaolinite-dickite quantification. Increasing kaolin particle size is known to cause decreased intensity of the FTIR spectra. A model was developed to test whether this effect is consistent with the non-linear progression of the IR features. The relative intensity of kaolinite and dickite IR features were calculated in a series of kaolinite-to-dickite transformations, where the size of particles increases with dickite proportion, and where dickite-dominated particles reach a larger size than kaolinite-dominated particles. The results indicated that the differential particle size increase is possibly the cause of the lack of linearity between IR- and XRD-measured dickite proportions.

The pyroclastic sediments studied here contained varied amounts of zeolite and were formed in the saline alkaline Tuzgölü Basin following the alteration of dacitic volcanic materials during the Early to Late Miocene. The present study focused on the geological-geochemical properties of the zeolites and describes their formation. Mineralogical and chemical compositions were determined by X-ray diffraction, scanning electron microscopy, optical microscopy, and inductively coupled plasma mass spectrometry. Results indicated that the zeolitic tuffs consisted mainly of heulandite/clinoptilolite (Hul/Cpt), chabazite, erionite, and analcime associated with smectite. Smectite, calcite, and dolomite are abundant in the clay and carbonate layers which alternate with the zeolitic tuffs. K-feldspar, gypsum, and hexahydrite (MgSO4·6H2O) were also found in some altered tuffs and clay-marl layers as accessory minerals. The zeolite and other authigenic minerals showed weak stratigraphic zonation. Some vitric tuff layers contained no zeolite minerals and others were found to consist of almost pure Hul/Cpt and chabazite layers with economic potential. The rare earth elements (REE), large ion lithophile elements (LILE), and high-field strength elements (HFSE) in the Hul/Cpt-rich tuffs and vitric tuffs were enriched or depleted relative to the precursor rock, while many major elements were slightly or significantly depleted in all zeolitic tuffs. The amounts of REE in the chabazite- and erionite-rich tuffs were generally smaller than those in the precursor rock. The middle and heavy REE (MREE and HREE, respectively) were abundant in the Hul/Cpt-rich tuffs, tuffs, and smectitic bentonites. Chondrite-normalized REE values of the sample groups are characterized by sub-parallel patterns with enrichment in LREE relative to HREE. The mineral assemblages and geological setting indicated that zeolite diagenesis occurred in a saline-alkaline basin. The δ18O and δD compositions of the Hul/Cpt, chabazite, and smectite indicated that the minerals formed at low to moderate temperatures and that some of the zeolitization occurred due to diagenetic alteration under closed-system conditions that varied according to the nature of the basin and with the composition and physical properties of the volcanic materials.

Catanionic surfactant systems are used as drug-delivery vehicles and as nanocompartments in the formation of biomaterials and nanosized particles. Clay minerals are compatible with organic tissues and also have biomedical applications. The aim of the present study was to combine the properties of catanionic surfactants and clay minerals to obtain new materials with potential uses in medicine, waste-water treatment, and antibacterial applications. The surfactants chosen to make the catanionic surfactant were cetylpyridinium (CP) and lauroyl sarcosinate (SR), which interact strongly in aqueous media and cause specific aggregations such as ion-pair amphiphiles and needle- and leaf-like structures. Aside from the aqueous solution, new ternary systems are formed with different structures and properties through the addition of montmorillonite (Mnt). The surface and interlayer structures of the different Mnt-CP-SR samples prepared by using CP and SR in amounts equal to various ratios of cationic exchange capacity of the clay mineral were studied. They were also compared with the structured surfactant aggregates formed in aqueous media. The Mnt-CP-SR samples were subjected to X-ray diffraction (XRD), thermogravimetric analyses, and zeta-potential measurements to elucidate the interlayer- and external-surface structures. The XRD analyses showed the formation of a compact structure in the interlayer region resulting from the interaction between randomly oriented pyridinium and negatively charged SR head groups. The triple interactions among the Mnt surface, CP, and SR were more complex than the double interactions between the Mnt and cationic surfactant, and the CP played a dominant role in the formation of external and interlayer surface structures regardless of the amount and order of the addition of SR. The new findings support new applications for organoclays in the fields of biomedicine, remediation of polluted water, and nanocomposite materials.

Serpentinites, which contain high concentrations of Cr and Ni, weather easily into layer silicates and are therefore a possible source of metal contamination in soils. In the present study three soil profiles formed on serpentinites in a paddy field in eastern Taiwan were investigated to understand pedogenic clay-mineral transformations and to determine the relationship between the mineralogical characteristics and labile Cr and Ni in the soil. To this end, physicochemical analyses, micromorphology, X-ray diffraction, and Fourier transform infrared spectroscopy were employed. Serpentine and chlorite were the dominant minerals in the soil parent material, with smaller amounts of pyroxene, amphibole, and talc. Progressive weathering and the release of cations from the parent material resulted in the pedogenic formation of smectite, vermiculite, and interstratified chlorite-vermiculite, demonstrated by their presence in all Ap and AC horizons but their absence from the C horizons. Serpentine, pyroxene, amphibole, and talc are proposed to be transformed to low-charge smectite, while chlorite transformed to vermiculite through an interstratified chlorite-vermiculite phase. The surface soils were enriched in oxalate-extractable Fe relative to the subsoils, which was probably generated by the artificial flooding and draining of the paddy soils. The artificial flooding, which typically releases Fe, may also drive the observed partial hydroxyl interlayering of smectite and incomplete interlayer OH sheets of chlorite. Labile Cr and Ni (extracted with 0.1 N HCl) ranging from 4.7 to 26.8 mg kg−1 and from 56 to 365 mg kg−1, respectively, increased significantly toward the surface soil, consistent with weathering. The heavy metals released may pose a threat to the environment as well as to human health by entering the food chain.

Imogolite is usually formed by means of a three-step process involving the use of large amounts of water with long crystallization times and low yields, preventing large-scale synthesis. These drawbacks can be overcome by synthesis in the presence of fluoride, an approach which has been demonstrated to be suitable for the synthesis of other phyllosilicates. In the present study, the nature of the Al and Si sources, the Al/Si molar ratio, the volume of H2O for the redispersion of the gel after desalination, the F/Si molar ratio, as well as the crystallization temperature and time have been varied to investigate their role in the crystallization of imogolite. The structural properties of the as-synthesized samples were characterized by X-ray diffraction, infrared spectroscopy, and 29Si, 27Al, and 19F magic angle spinning nuclear magnetic resonance spectroscopy. The results show that the imogolite nanotubes can be prepared with high yields (>55%) from AlCl3·6H2O and Na4SiO4 aqueous solutions with an Al/Si molar ratio of 2.5, addition of HF for a F/Si molar ratio of 0.1–0.2, and 4 days of crystallization at 98°C.