Late Paleozoic strata in the southeastern Ordos Basin comprise targeted reservoirs for tight gas exploration. As a typical intracratonic basin, the Ordos Basin is characterized by low-accommodation space and a complex sediment infilling process, which attracts much attention. During the early Permian, the southeast area was fed by sediments from multiple sediment sources, which makes it difficult to identify the pinch-out of the sand bodies and reconstruct the sediment routing system. In this study, we reconstruct the paleo-topography of the late Paleozoic setting using high-resolution 2D and 3D seismic data. Thus, we identify two types of topography: the eastern block is presented as a semiclosed depression, and the western block is observed as a flat platform. Based on detrital zircon U–Pb data and heavy mineral assemblages, we reconstruct the provenance area and show that early Permian sediments originate from the northern margin of the Ordos Basin and from the northern Qinling orogenic belt in the south. By integrating the trace element contents, carbon and oxygen isotope data and sedimentary structure from core samples, we can observe the paleoenvironment and the corresponding facies associations in these blocks. The eastern block was infilled by a prograding delta; the western block was infilled by a tide-dominated delta or a wavy-dominated delta. By using stratigraphic forward modelling, we find that most sediments in the semiclosed setting are progradational and intensely interacted. In contrast, the sediments in the western block present an open setting, infilled and gently interacted. The fine-grained deposits were not easily preserved due to tidal or wave reworking processes in the shallow-water marine setting, and they were transported into deep-water areas. Furthermore, to explore the dominant factors in a pattern of fluvial–deltaic sand bodies formed in the low-accommodation basin, we rebuild the sediment routing system parameters and plot them on a bubble chart. According to the fitness between the depositional volume and the above parameters, we determine the key factors in the routing systems that formed. The results show that the sediment supply has a high relevance to the depositional volume in a semiclosed setting, such as the eastern block, while the terrain height may drive sedimentation in an open marine setting, such as the western block. We demonstrate that two different infill patterns and different sand-body stacking patterns with multiple sediment sources in a low-accommodation basin may serve as a model for similar settings.

The Nama Group, Namibia (≥550.5 to <538 million years ago, Ma), preserves one of the most diverse metazoan fossil records of the terminal Ediacaran Period. We report numerous features that may be biological in origin from the shallow marine, siliciclastic, lowermost Mara Member (older than ca. 550.5 Ma) from the Tsaus Mountains. These include forms that potentially represent body fossils, Beltanelliformis and an indeterminate juvenile uniterminal rangeomorph or arboreomorph frond, plug trace fossils, Bergaueria, as well as sedimentary surface textures, which are possibly microbially induced. These are the oldest documented macrofossils in the Nama Group. They represent taxa that persist from the Avalon or White Sea assemblages prior to the later appearance of new biota, including calcified metazoans, calcified and soft-bodied tubular taxa including all cloudinids, as well as more complex trace fossils.

Using a new age model that allows more accurate stratigraphic placement of major Ediacaran macrofossil morphogroups and taxa, we propose a re-definition of the Nama Assemblage following the practice for Phanerozoic evolutionary faunas to include only new morphogroups of soft-bodied tubular, calcified taxa and complex trace fossils, defined by first appearance of Cloudina, which postdates deposition of the Kanies and lower Mara members and first appears ca. 550 Ma and persists until at least 539 Ma.

Finally, the Tsaus Mountain environment is pristine, unspoilt by geologists and naturalists. Following World Heritage Convention, we suggest a pledge of non-destructive excavation that all future scientists should be able to make in publications of work that involve research in this area.

The concentration of the bio-limiting nutrient element, phosphorus (P), in seawater is important for primary marine productivity and the evolution of life on geological time scales. The molar percentage of P/Fe in banded iron formations (BIF) and iron oxide-rich chemical sediments is a good proxy for the first-order approximation of seawater P concentration. Bio-available concentration of phosphorus in Precambrian, especially during the late Palaeoproterozoic Era (2.0–1.8 Ga), is poorly constrained. We evaluated the P/Fe ratios of iron-rich rocks from the late Palaeoproterozoic Chilpi Group, Bastar Craton, Central India. The bulk rock molar percentage of P/Fe ratios of the Chilpi rocks vary between 0.11 and 1.17 (average 0.51 ± 0.3), and the average of EPMA spot analysis P/Fe molar ratio is 0.32 ± 0.4; both have values similar to Archaean BIFs of the world. The observed low molar ratio is not an artefact of contamination from terrestrial sources, diagenetic alterations or high-temperature hydrothermal inputs; it indicates the deposition from phosphorus-lean seawater. The modelled P/Fe molar ratio in the Chilpi Group suggests that the concentration of phosphorus in the shallow marine environment was less than 0.12 μM. The low level of phosphorus concentration in seawater during the late Palaeoproterozoic Era is interpreted to be a consequence of the low primary production during a period of low atmospheric oxygen content, which might have impeded the evolution of eukaryotes.

Invertebrate bioerosion on fossil bone can contribute to reconstructions of benthic taxonomic assemblages and inform us about oxygenation levels, water depth and exposure time on the seafloor prior to burial. However, these traces are not commonly described in the fossil record. To date, there have been only 13 published studies describing a total of 15 instances of invertebrate bioerosion on marine reptile fossil bones from the Mesozoic globally. We surveyed the collections of several UK museums with substantial occurrences of Mesozoic marine reptiles for evidence of invertebrate bioerosion. Here, we document 153 specimens exhibiting 171 newly recorded instances of invertebrate bioerosion on Jurassic and Cretaceous marine reptile bones. Several major bioeroding taxonomic groups are identified. Within the geological strata of the United Kingdom, there is a higher prevalence of bioerosion in the Cretaceous relative to the Jurassic, despite greater sampling of specimens from the Jurassic. Although biotic turnover and food web restructuring might have played a role, potentially pertaining to heightened productivity during the later stages of the Mesozoic Marine Revolution, we consider it more likely that this temporal change corresponds to differences in depositional environment and taphonomic history between the sampled rock units. In particular, the Cretaceous deposits are characterized by heightened oxygenation levels relative to their Jurassic counterparts, as well as reworking, which would have allowed two phases of bioerosion. A spatiotemporally broader dataset on invertebrate bioerosion on vertebrate bone will be important in further testing this and other hypotheses.

Numerous Late Carboniferous – Early Permian dykes are found in West Junggar and represent an important part of the Central Asian Orogenic Belt. In this contribution, we use these dykes to assess the tectonic regime and stress state in the Late Carboniferous – Early Permian. The West Junggar dykes are mainly diorite/dioritic porphyrite with minor diabase and were formed in 324–310 Ma. They have been divided into two groups based on their orientation, petrology and geochronology. Group 1 dykes mostly comprise WNW-striking dioritic porphyrite and NE-striking diorite with minor diabase and resemble the Karamay-Baogutu sanukitoid. They were probably formed from depleted mantle at a relatively high temperature and pressure with the addition of 1–2% sediment/sedimental partial melt and 0–5% trapped oceanic crust-derived melts. Group 2 dykes are ENE-striking and are similar to sanukite in the Setouchi Volcanic Belt. These dykes were also derived from depleted mantle at a shallow depth but high temperature with the addition of 2–3.5% sediment/sedimental partial melt. Magma banding and injection folds in dykes and host granitoids indicate magma flow. Paleostress analysis reveals that both groups of dykes were formed in a tensile stress field. Their emplacement is favoured by presence of pre-existing joints or fractures in the host granitoids and strata. We conclude that large-scale asthenosphere mantle upwelling induced by trapped oceanic slab-off can explain the magmatism and significant continental crustal growth of West Junggar during Late Carboniferous to Early Permian.

Typical ophiolitic rock assemblages such as siliciclastic rocks, basalts and gabbros, together with the subduction-related intermediate-acidic intrusive rocks, are newly discovered in the Tongjiang-Fuyuan area of the Heilongjiang Provence, NE China. To determine the formation age and genesis of the mafic rocks (basalts and gabbros) and intermediate-acidic intrusive rocks (granodiorites) in the area, as well as their geodynamic settings, the whole-rock geochemical analysis and zircon LA-ICP-MS U-Pb dating were carried out. Zircon U-Pb results suggest that the granodiorites are 93–95 Ma and gabbro is 95 Ma, respectively. Geochemical results show that the gabbros and basalts exhibit characteristics of ocean island basalt (OIB) affinity and are typically related to having originated from mantle plumes. While the granodiorites show the nature of the island-arc magmatic rocks and may originate from the lower crust. Based on the coeval igneous rock associations and regional tectonic evolution, we conclude that the late Cretaceous magmatic rocks in the Tongjiang-Fuyuan area are the product of continuous subduction of the Palaeo-Pacific plate and reflect the subduction rollback process of the Palaeo-Pacific plate.

The Jinying gold deposit is located in southern Jilin Province in northeast China and is representative of the large Early Cretaceous gold deposits in this area. To better understand ore genesis of this deposit, a multi-isotope integrated analysis of U–Pb–Rb–Sr–He–Ar–S has been carried out. Laser ablation inductively coupled plasma–mass spectrometry (LA–ICP–MS) dating of zircons from the granodiorite porphyry and dioritic porphyrite in the study area yields ages of 172.1 ± 1.2 Ma and 122.5 ± 0.8 Ma, suggesting that corresponding intrusion occurred in the Middle Jurassic and the Early Cretaceous. Rb–Sr dating of the pyrite yields an isochron age of 120 ± 3 Ma, suggesting that gold mineralization occurred in the Early Cretaceous. The fluid inclusions in pyrite yield 3He/4He ratios clustered within a small range from 0.08 to 0.13 Ra, 40Ar/36Ar ratios between 331.6 and 351.3, and mantle He in the range of 1.0–1.6%, indicating that the ore-forming fluids originated from a mixed crustal and mantle source. The in situ S isotopic values of pyrite vary between + 0.1 ‰ and + 2.8 ‰, suggesting that the ore-related sulphur came from the deep magmatic source. Combined with the geological history of the study area, it can be concluded that the gold mineralization was possibly related to the extensional setting associated with the rollback of the Palaeo-Pacific Plate.

Sedimentary rocks exposed at Dob’s Linn, Scotland, have significantly influenced our understanding of how life evolved over the Ordovician to Early Silurian. The current interpreted chronostratigraphic boundary between the Ordovician and Silurian periods is a Global Boundary Stratotype Section and Point (GSSP), calibrated to 443.8 ± 1.5 Ma (Hirnatian–Rhuddanian age), based on biostratigraphic markers, radioisotopic dates and statistical modelling. However, challenges arise due to tectonic disturbances, complex correlation issues and the lack of systematic dating in Ordovician–Silurian stratigraphic sections. Here, hundreds of zircon grains from three metabentonite ash horizons were dated using Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). A subset of the grains were re-analyzed using Chemical Abrasion Isotope Dilution Thermal Ionization Mass Spectrometry (CA-ID-TIMS). We present a high-precision CA-ID-TIMS 238U-206Pb weighted mean date of 440.44 ± 0.55/0.56/0.72 Ma (±analytical/with tracer/with U-decay constant) for the Coronagraptus cyphus biozone. However, the study reports younger, and in certain cases, older LA-ICP-MS zircon dates within the Coronagraptus cyphus, Akidograptus ascensus and Dicellograptus anceps zones, suspected as being influenced by Pb loss and LA-ICP-MS matrix mismatch. The study reports concerns about the suitability of Dob’s Linn as a GSSP section and examines various LA-ICP-MS maximum depositional age (MDA) approaches, suggesting the use of the TuffZirc date and the youngest mode weighted mean (YMWM) as suitable MDA calculations consistent with CA-ID-TIMS results.

High-precision U-Pb zircon ages on SE Newfoundland tuffs now bracket the Avalonian Lower–Middle Cambrian boundary. Upper Lower Cambrian Brigus Formation tuffs yield depositional ages of 507.91 ± 0.07 Ma (Callavia broeggeri Zone) and 507.67 ± 0.08 Ma and 507.21 ± 0.13 Ma (Morocconus-Condylopyge eli Assemblage interval). Lower Middle Cambrian Chamberlain’s Brook Formation tuffs have depositional ages of 506.34 ± 0.21 Ma (Kiskinella cristata Zone) and 506.25 ± 0.07 Ma (Eccaparadoxides bennetti Zone). The composite unconformity separating the Brigus and Chamberlain’s Brook formations is constrained between these ages. An Avalonian Lower–Middle Cambrian boundary between 507.2 ± 0.1 and 506.3 ± 0.2 Ma is consistent with maximum depositional age constraints from southwest Laurentia, which indicate an age for the base of the Miaolingian Series, as locally interpreted, of ≤ 506.6 ± 0.3 Ma. The Miaolingian Series’ base is interpreted as correlative within ≤ 0.3 ± 0.3 Ma between Cambrian palaeocontinents, although its exact synchrony is questionable due to taxonomic problems with a possible Oryctocephalus indicus-plexus, invariable dysoxic lithofacies control of O. indicus and diachronous occurrence of O. indicus in temporally distinct δ 13C chemozones in South China and SW Laurentia. The lowest occurrence of O. indicus assemblages is linked to onlap (epeirogenic or eustatic) of dysoxic facies. A united Avalonia is shown by late Early Cambrian volcanics in SW New Brunswick; Cape Breton Island; SE Newfoundland; and the Wrekin area, England. The new U-Pb ages revise Avalonian geological evolution as they show rapid epeirogenic changes through depositional sequences 4a–6.

The concept of superposed fracture networks consisting of different generations, and often types, of fractures that have developed sequentially is discussed. Superposed networks can consist of different types of extension or shear fractures, and each fracture may abut, cross or follow (reactivate) earlier fractures. An example of a superposed fracture network in Liassic limestones in Somerset, UK, is presented, which comprises two sets of veins and a later joint network. The veins develop as damage zones around faults, with veins of the later set crossing or trailing along the earlier set. The later joints either cross-cut the earlier veins or reactivate them, the latter being common for the thicker (more than about 5 mm) veins. The veins and joint networks have markedly different geometries and topologies. The veins are spatially clustered and are typically dominated by I-nodes, while the joints are more evenly distributed and tend to be dominated by Y-nodes. The combined network of veins and joints at Lilstock is dominated by X-nodes because so many joints cross-cut the earlier veins. Understanding the development of superposed fracture networks leads to better understanding of the kinematic, mechanical, tectonic and fluid flow history of rocks.

Field evidence from the northern Cotentin Peninsula and regional data are used to construct a tectono-stratigraphic model for the Ordovician which characterizes basin development in the North Armorican Massif. In La Hague, 15 m of transgressive marine sandstone belongs to the Dapingian age Grès Armoricain Formation which onlaps lower Cambrian, rift-fill deposits via an unconformity. Approximately 450 m of overlying Darriwilian strata are dominated by shallow marine sandstone showing hummocky cross-stratification with subordinate shales containing trace and body fossils. Together, these facies support an interpretation of offshore shallow marine strata overlying a break-up unconformity. Regional analysis indicates the time gap at the unconformity is 20–40 Ma and formed from crustal upwarping, which was greatest in the north of the Armorican Massif. Dapingian strata (Grès Armoricain) thins irregularly to the north (0–94 m), interpreted to reflect passive onlap onto residual relief associated with the uplift and the initiation of thermal subsidence on the margin. The succeeding Darriwilian strata (Schistes de Beaumont to Grès de May) conversely display a steady thickening (161–623 m) to the north, the stratal patterns suggesting that from the Darriwilian onwards, the ocean basin to the north was firmly established as the main locus of subsidence on the continental margin.