A new mineral species, staročeskéite, ideally Ag0.70Pb1.60(Bi1.35Sb1.35)Σ2.70S6, has been found at Kutná Hora ore district, Czech Republic. The mineral occurs in the late-stage Bi-mineralization associated with other lillianite homologues (gustavite, terrywallaceite, vikingite, treasurite, eskimoite and Bi-rich andorite-group minerals) and other bismuth sulfosalts (izoklakeite, cosalite and Bi-rich jamesonite) in quartz gangue. The mineral occurs as lath shaped crystals or anhedral grains up to 80 µm × 70 µm, growing together in aggregates up to 200 µm × 150 µm across. Staročeskéite is steel-grey in colour and has a metallic lustre, the calculated density is 6.185 g/cm3. In reflected light staročeskéite is greyish white; bireflectance and pleochroism are weak with greyish tints. Anisotropy is weak to medium with grey to bluish grey rotation tints. Internal reflections were not observed. The empirical formula based on electron probe microanalyses and calculated on 11 apfu is: (Ag0.68Cu0.01)Σ0.69(Pb1.56Fe0.01Cd0.01)Σ1.58(Bi1.32Sb1.37)Σ2.69(S6.04Se0.01)Σ6.05. The ideal formula is Ag0.70Pb1.60(Bi1.35Sb1.35)Σ2.70S6, which requires Ag 7.22, Pb 31.70, Bi 26.97, Sb 15.72 and S 18.39 wt.%, total 100.00 wt.%. Staročeskéite is a member of the lillianite homologous series with N = 4. Unlike gustavite and terrywallaceite, staročeskéite, similarly to lillianite, is orthorhombic, space group Cmcm, with a = 4.2539(8), b = 13.3094(8), c = 19.625(1) Å, V = 1111.1(2) Å3 and Z = 4. The structure of staročeskéite contains four sulfur sites and three metal sites: one pure Pb site and two mixed sites, M1 (0.52Bi + 0.356Ag + 0.124Sb) and M2 (0.601Sb + 0.259Pb + 0.14Bi). The mineral is characterized by the Bi:Sb ratio 1:1 (Bi/(Bi + Sb) = 0.50) and the Ag+ + Bi3+, Sb3+ ↔ 2 Pb2+ substitution (L%) equal to 70%. Thus the mineral lies between two series of the lillianite structures with N = 4, between the lillianite–gustavite series and the andorite series.

The historic Waterberg platinum deposit, ~15 km WNW of Mookgophong (formerly Naboomspruit), Limpopo Province, South Africa, is a rare fault-bound hydrothermal vein-type quartz-hematite-platinum-group mineralization. As a continuation of the geochemistry and ore mineralogy studies (Part I, Oberthür et al., 2018), this paper concentrates on the ore-bearing quartz and on the age constraints of ore formation. The state-of-the-art methods used include cathodoluminescence microscopy, electron probe microanalysis (EPMA) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) of trace elements, stable isotope (δ18O) analysis and fluid-inclusion studies. U-Pb and (U-Th)/He radiometric age determination gave ages of 900–1075 Ma suggesting platinum-group element (PGE) mineralization as a result of upwelling fluids with connection to the Bushveld complex during Kibaran tectonic movements along the Thabazimbi–Murchison Lineament. Felsic fragments containing Qtz-1 were cemented by different quartz generations (Qtz-2 to Qtz-4) and enable the characterization of the changing physicochemical parameters during multistage mineralization and cooling. The PGE minerals are associated with the earliest hydrothermal stage represented by botryoidal radial-fibrous quartz aggregates (Qtz-2a) which formed on brecciated felsite. The other quartz types are essentially barren. Cathodoluminescence studies of quartz indicate very high Al, Fe and K concentrations as confirmed by EPMA and LA-ICP-MS, whereas Ti is always very low. The varying Al concentrations in the quartz mainly indicate pH fluctuations, the high Fe3+ points at high oxygen fugacity. Micro-inclusions of iron oxide are associated with Pt ore (Fe, Pt, Pd, Au, W, Sb, As), rutile, kaolinite and muscovite. The hydrothermal activity must have been characterized by low saline (<10 wt%) H2O–NaCl solutions. These fluids mixed with original high-saline NaCl ± CaCl2 ± CO2 brines in the brecciated felsite (Qtz-1). According to the quartz-hematite geothermometer the ore depositional temperatures were ~370–330°C (Qtz-2a), whereas the successive quartz veins formed during cooling towards ~295°C. The transport of PGE must have been facilitated by strongly oxidizing chloride complexes of relatively low salinity and moderate acidity.

The new mineral bytízite was found in the dump of shaft No. 16, one of the mines in the Příbram uranium and base-metal district, central Bohemia, Czech Republic. Bytízite is associated with chaméanite, příbramite, giraudite, berzelianite, umangite, eskebornite, hakite, tetrahedrite, bukovite, crookesite and uraninite in a calcite-dominant gangue. The new mineral occurs as anhedral grains up to 40 µm, growing together in aggregates up to 300 µm across. Bytízite is steel-grey in colour and has a metallic lustre. Mohs hardness is ca. 2–3; the calculated density is 6.324 g cm–3. In reflected light bytízite is grey with a yellowish hue, yellowish and brownish. Bireflectance and pleochroism are weak. Anisotropy is strong with grey to brownish rotation tints. Internal reflections were not observed. The empirical formula, based on electron-microprobe analyses, is (Cu3.00Fe0.01Ag0.01)3.02(Sb0.97As0.06)1.03Se2.94. The ideal formula is Cu3SbSe3, which requires Cu 34.71, Sb 22.16 and Se 43.13, total 100.00 wt.%. Bytízite is orthorhombic, Pnma, a = 7.9594(12), b = 10.5830(14), c = 6.8240(11) Å, with V = 574.82(15) Å3 and Z = 4. The strongest reflections of the calculated powder X-ray diffraction pattern [d, Å (I)(hkl)] are: 3.73(37)(210), 3.27(62)(211), 2.867(40)(022), 2.698(100)(122) and 2.646(37)(040). According to the single-crystal X-ray diffraction data (Robs = 0.0437), bytízite is isostructural with synthetic Cu3SbSe3. The structure of bytízite contains two Cu, one Sb, and two Se sites (the latter is occupied both by Se and S atoms). In the structure of both synthetic Cu3SbSe3 and bytízite, there are groups of three cis-edge-sharing tetrahedra [Cu3Se8], which are interlinked to a 3D framework by SbSe3 groups. Bytízite is named after its type locality, the Bytíz deposit, near the village Bytíz.

Several gold deposits hosted mainly by Variscan granites and Precambrian to Palaeozoic metasediments occur in the northwestern part of Portugal. Most of these deposits were mined by the Romans (in the period I BC to II AD) as open pits and surface galleries. The Castromil-Serra da Quinta gold deposit is an important example of such a mined site; it occurs in the Dúrico-Beirã Au province located in the Central Iberian Zone (CIZ) in the western branch of European Variscan belt, mainly on the eastern flank of the Valongo anticline. Open pits and underground galleries at Castromil-Serra da Quinta exploited the gossan formed from the weathering of primary mineralization. The gossan is composed essentially of goethite, scorodite and clay minerals. A recent drilling campaign at Castromil-Serra da Quinta has provided samples of the primary mineralization below the oxidation level. Different modes of gold occurrence are defined based on metallographic studies of both the gossan and drill cores. Gold I occurs encapsulated in primary sulfide minerals, mainly arsenopyrite and pyrite; Gold II is also associated with the main primary sulfides, but occurs along grain boundaries and in microfractures of the sulfides or in associated quartz veins; and Gold III occurs as free gold particles in iron oxides within the gossan. In the gossan samples, it is difficult to distinguish whether the gold particles hosted in oxides correspond to Gold I, Gold II, or both, so these particles are described as Gold I–II and they are commonly surrounded by very much smaller particles of Gold III. Scanning electron microscope (SEM) and electron probe microanalysis (EPMA) data for the different gold particles reveal that Gold I is poorer in Ag (~15.5–39.76%) than Gold II (37.46–51.45%), whereas Gold III corresponds to native gold (<16.11% Ag). Gold III is thought to reflect gold enrichment in the upper level of the deposit, resulting from weathering processes that affected the primary Au (Bi) mineralization.

The new mineral triazolite is found in a guano deposit located on the Pabellón de Pica Mountain, Iquique Province, Tarapacá Region, Chile. Associated minerals are salammoniac, halite, dittmarite, joanneumite, chanabayaite, nitratine, natroxalate and möhnite. Triazolite occurs as deep blue prismatic crystals up to 0.1 mm × 0.15 mm × 0.75 mm and their radial aggregates up to 1.5 mm across. The mineral is brittle. Its Mohs hardness is 2. Dcalc = 2.028 g cm–3. The infrared spectrum shows the presence of 1,2,4-triazolate anion and ammonia and water molecules. Triazolite is optically biaxial (–), α = 1.582(4), β = 1.625(3), γ = 1.625(3) and 2Vmeas = 5(3)°. The chemical composition (electron-microprobe data for Cl, Na, Fe and Cu; H, C, N and S contents were measured by gas chromatography of products of ignition at 1200°C; wt.%) is: Na 4.91, Fe 1.51, Cu 22.06, Cl 19.80, S 1.4, C 7.7, H 4.4, N 24.2, O (calc.) 12.83, total 98.81. The empirical formula is Na1.14(Cu1.86Fe0.14)(Cl2.99S0.23)N9.23C3.43H23.34O4.29. The idealized formula is NaCu2(N3C2H2)2(NH3)2Cl3·4H2O. Triazolite is a metalorganic ammine complex in which 1,2,4-triazolate anion and ammonia molecule are ligands coordinating Cu2+. The crystal structure was solved by direct methods and refined to R = 0.0242 based on 4210 unique reflections with I > 2σ(I). Triazolite is orthorhombic, space group P212121, a = 19.3575(5), b = 7.15718(19), c = 12.5020(4) Å, V = 1732.09(8) Å3 and Z = 4. The eight strongest reflections of the powder X-ray diffraction pattern [d, Å (I,%) (hkl)] are: 10.22 (97) (101), 6.135 (40) (011), 5.696 (17) (301), 5.182 (59) (202), 5.119 (100) (211), 4.854 (19) (400), 3.752 (16) (312, 501), 3.294 (18) (221). Triazolite is named for the presence of 1,2,4-triazolate anion.

A P21/c synthetic (Ca0.2Co0.8)CoSi2O6 pyroxene was synthesized by slow cooling from melt at high pressure. Single crystals suitable for X-ray diffraction were obtained and refined. The results were compared to those of C2/c pyroxenes along the series CaCoSi2O6–Co2Si2O6. Strong similarities in the crystal chemical mechanism of the transition with the synthetic CaFeSi2O6–Fe2Si2O6 and CaMgSi2O6–Mg2Si2O6 pyroxenes, both at an average and local level are apparent.

The results, examined together with two new refinements of pigeonite in the ureilites ALHA77257 and RKPA80239 and with a set of natural and synthetic C2/c and P21/c pyroxenes, show that the average cation radius in the M2 site is the driving force for the phase transition from C2/c to P21/c. The longest M2–O3 distances and the O3–O3–O3 angles follow the same trend, dictated only by the ionic radius in M2, in either synthetic or natural pyroxenes, regardless of the ionic radius of the M1 cations. The transition also affects the difference between bridging and non-bridging oxygen atoms and the extent of tetrahedral deformation, whereas the M1–O, M2–O1 and M2–O2 distances are unaffected by the transition and are determined only by the ionic radius of the bonding cation. The structural changes between the ionic radius and the high temperature C2/c and P21/c transitions are similar, and different to the high-pressure transition.

Analysis of natural and synthetic pyroxenes shows that the transition with composition occurs in strain free pyroxenes for a critical radius of 0.85 Å. Increasing strain stabilizes the P21/c structure to a higher temperature and larger cation radius.

Finally, our results show that the monoclinic P21/c Ca-poor clinopyroxene, i.e the mineral pigeonite, crystallizes only at conditions where the structure is HT-C2/c, and changes to the P21/c symmetry during cooling.