The following corrections to the paper by Zhang et al.1 should be noted. The corrected paper follows this notice.

The title of the originally published paper should be corrected to “Design and analysis of a 3-DOF spherical parallel manipulator.”

Due to the efficient and flexible flight ability of bats, bat-like robots have become the focus of research in the field of bionic robots. Aerodynamic calculation is an important part of the research field of bat-like robot, which is the basis of the structure design and flight controller design of bat-like robot. However, due to the complex flight mechanism of bats, there is no mature theoretical method to calculate the flight aerodynamic force of bat-like robots. To solve this problem, this paper takes the membrane of a bat-like robot as the research object and analyzes in detail the effects of wing folding and unfolding and flexible deformation of the membrane on the chord length, passive torsion angle and relative velocity. Based on quasi-steady state model and blade element method, a set of aerodynamic calculation method for flexible deformed wing is established. In order to verify the effectiveness of the proposed method, the theoretical calculation results and the results of the fluid-structure interaction simulation are compared and analyzed under various working conditions. The two results are in good agreement under each working condition, and the errors are all within reasonable range, which proves the effectiveness of the method. This study can provide a theoretical basis for rational structure design and precise flight control of bat-like robot.

In this study, a fuzzy reinforcement learning control (FRLC) is proposed to achieve trajectory tracking of a differential drive mobile robot (DDMR). The proposed FRLC approach designs fuzzy membership functions to fuzzify the relative position and heading between the current position and a prescribed trajectory. Instead of fuzzy inference rules, the relationship between the fuzzy inputs and actuator voltage outputs is built using a reinforcement learning (RL) agent. Herein, the deep deterministic policy gradient (DDPG) methodology consisted of actor and critic neural networks is employed in the RL agent. Simulations are conducted with considering varying slip ratio disturbances, different initial positions, and two different trajectories in the testing environment. In the meantime, a comparison with the classical DDPG model is presented. The results show that the proposed FRLC is capable of successfully tracking different trajectories under varying slip ratio disturbances as well as having performance superiority to the classical DDPG model. Moreover, experimental results validate that the proposed FRLC is also applicable to real mobile robots.

This paper presents a decentralized, cooperative, real-time avoidance control strategy for robotic manipulators. The proposed avoidance control law builds on the concepts of artificial potential field functions and provides tighter bounds on the minimum safe distance when compared to traditional potential-based controllers. Moreover, the proposed avoidance control law is given in analytical, continuous closed form, avoiding the use of optimization techniques and discrete algorithms, and is rigorously proven to guarantee collision avoidance at all times. Examples of planar and 3D manipulators with cylindrical links under the proposed avoidance control are given and compared with the traditional approach of modeling links and obstacles with multiple spheres. The results show that the proposed avoidance control law can achieve, in general, faster convergence, smaller tracking errors, and lower control torques than the traditional approach. Furthermore, we provide extensions of the avoidance control to robotic manipulators with bounded control torques.

This paper presents the design, modeling, and control of a novel soft-rigid knee joint robot (SR-KR) for assisting motion. SR-KR is proposed to assist patients with knee joint injuries conducting gait training and completing walking movements. SR-KR consists of a novel soft-rigid bidirectional curl actuator, a thigh clamping structure, and a crus clamping structure. The actuating part of SR-KR is composed of soft materials, which ensures the wearing comfort and safety, while the wearing parts contain rigid structure, which ensures the efficient transmission of torque. The bending deformation model of SR-KR is established, which reveal the relationship among SR-KR’s bending curvature, working pressure, and output torque. Experiments show that SR-KR can provide more than 26.3 Nm torque for knee joint motion in human gait range. A double closed loop servo control system including attitude servo and pressure servo is built to better apply SR-KR. Mechanical property test, trajectory-driven test, and lower limb wearing test have been conducted, which show that SR-KR has ability to assist in lower limb motion and has potential in the fields of rehabilitation and human enhancement.

In order to resolve redundancy and path planning of a high DOF mobile manipulator using conventional approaches like Jacobian and a pseudoinverse method, researchers face the limitation of computational load and delay in response. If such kind of mobile manipulator is traversing the rough terrain, then conventional methods become too costly to implement due to the handling of redundant joints, obstacles, and wheel-terrain interaction. A few optimization-based redundancy resolution approaches try incorporating wheel-terrain interaction but fail in real-time response. This paper describes a 14 DOF Rover Manipulator System’s end-effector path-tracking approach using CG-Space framework to incorporate wheel-terrain interaction. CG-Space means the center of gravity (CG) locus of the Rover. The Rover’s CG is calculated while traversing over 3D terrain using a multivariable optimization method and a 3D point cloud image of the actual terrain and stored as CG-Space over the given terrain. First of all, we decide which part of the system moves to track the path, that is, arm or Rover, depending upon the manipulator’s work volume and manipulability measure restrictions. The next task is to obtain the Rover pose according to the end-effector path using a simple arm’s inverse kinematic solution between the CG-Space and end-effector task space without resolving redundancy. Meanwhile, obstacles and non-traversable regions are avoided in CG-Space. On diverse 3D terrains, simulation and experimental results support the suggested CG-Space framework for end-effector tracking.

Physically compliant actuator brings significant benefits to robots in terms of environmental adaptability, human–robot interaction, and energy efficiency as the introduction of the inherent compliance. However, this inherent compliance also limits the force and position control performance of the actuator system due to the induced oscillations and decreased mechanical bandwidth. To solve this problem, we first investigate the dynamic effects of implementing variable physical damping into a compliant actuator. Following this, we propose a structural scheme that integrates a variable damping element in parallel to a conventional series elastic actuator. A damping regulation algorithm is then developed for the parallel spring-damping actuator (PSDA) to tune the dynamic performance of the system while remaining sufficient compliance. Experimental results show that the PSDA offers better stability and dynamic capability in the force and position control by generating appropriate damping levels.