Pesticide drift has been a concern since the introduction of pesticides. Historical incidences with off-target movement of 2,4-D and dichlorodiphenyltrichloroethane (DDT) have increased our understanding of pesticide fate in the atmosphere following aerial application. More recent incidences with dicamba have brought to light gaps in our current understanding of aerial pesticide movement following ground application. In this paper, we review the current understanding of inversions and other weather and environmental factors that contribute to secondary pesticide movement and raise questions that need to be addressed. Factors that influence volatility and terminology associated with the atmosphere, such as cool air drainage, temperature inversions, and radiation cooling will be discussed. We also present literature that highlights the need to consider the role(s) of wind in secondary drift in addition to the role in physical drift. With increased awareness of pesticide movement and more herbicide-resistant traits available than ever before, it has become even more essential that we understand secondary movement of pesticides, recognize our gaps in understanding, and advance from what is currently unknown.

Pollen-mediated gene flow (PMGF) refers to the transfer of genetic information (alleles) from one plant to another compatible plant. With the evolution of herbicide-resistant (HR) weeds, PMGF plays an important role in the transfer of resistance alleles from HR to susceptible weeds; however, little attention is given to this topic. The objective of this work was to review reproductive biology, PMGF studies, and interspecific hybridization, as well as potential for herbicide resistance alleles to transfer in the economically important broadleaf weeds including common lambsquarters, giant ragweed, horseweed, kochia, Palmer amaranth, and waterhemp. The PMGF studies involving these species reveal that transfer of herbicide resistance alleles routinely occurs under field conditions and is influenced by several factors, such as reproductive biology, environment, and production practices. Interspecific hybridization studies within Amaranthus and Ambrosia spp. show that herbicide resistance allele transfer is possible between species of the same genus but at relatively low levels. The widespread occurrence of HR weed populations and high genetic diversity is at least partly due to PMGF, particularly in dioecious species such as Palmer amaranth and waterhemp compared with monoecious species such as common lambsquarters and horseweed. Prolific pollen production in giant ragweed contributes to PMGF. Kochia, a wind-pollinated species can efficiently disseminate herbicide resistance alleles via both PMGF and tumbleweed seed dispersal, resulting in widespread occurrence of multiple HR kochia populations. The findings from this review verify that intra- and interspecific gene flow can occur and, even at a low rate, could contribute to the rapid spread of herbicide resistance alleles. More research is needed to determine the role of PMGF in transferring multiple herbicide resistance alleles at the landscape level.

A study was conducted at the Louisiana State University Agricultural Center’s H. Rouse Caffey Rice Research Station in 2017 and 2018 to evaluate the interaction between a prepackage mixture of clomazone plus pendimethalin applied at 0, 760, 1,145, or 1,540 g ai ha−1 mixed with propanil at 0, 1,120, 2,240, or 4,485 g ai ha−1. A synergistic response occurred when barnyardgrass was treated with all rates of clomazone plus pendimethalin mixed with either rate of propanil evaluated at 56 d after treatment (DAT). Unlike barnyardgrass, an antagonistic response occurred in yellow nutsedge used as a control when treated with 760 and 1,540 g ha−1 of clomazone plus pendimethalin mixed with 1,120 or 22,40 g ha−1 of propanil at 28 DAT; however, 1,145 g ha−1 of clomazone plus pendimethalin mixed with 4,485 g ha−1 of propanil resulted in a neutral interaction. At 28 DAT, rice flatsedge treated with all herbicide mixtures resulted in neutral interactions. The synergism of clomazone plus pendimethalin applied at 1,540 g ha−1 mixed with propanil applied at 2,240 or 4,485 g ha−1 to control barnyardgrass resulted in an increased rough rice yield compared with 760 or 1,145 g ha−1 of clomazone plus pendimethalin mixed with propanil applied at 1,120 or 2,240 g ha−1. These results indicate that if barnyardgrass and rice flatsedge are present in a rice field the prepackage mixture of clomazone plus pendimethalin mixed with propanil can be an option for growers. However, if yellow nutsedge infest the area other herbicides may be needed.

Rhizoma perennial peanut (RPP) is well adapted to the Gulf Coast region of the United States, but its varietal tolerance to glyphosate and triclopyr is not well defined. The research was conducted to determine the effect of various rates of glyphosate and triclopyr on established RPP, and the response of common RPP varieties to these herbicides. The RPP sward was approximately 7 yr younger at Zolfo Springs than at the Ona location. RPP showed moderate tolerance to glyphosate and triclopyr application, and injury level did not differ with the age of RPP sward. However, biomass production was negatively influenced by the age of the RPP sward. Overall, injury from glyphosate applications did not exceed 40% at either site. The glyphosate rate for 20% biomass reduction was predicted to be 0.53 and 2.17 kg ae ha−1 at Zolfo Springs and Ona, respectively. RPP injury from triclopyr was greater at the Zolfo Springs location than at Ona, and the triclopyr rate predicted to result in a 20% biomass reduction was 0.45 and 0.99 kg ae ha−1 at the Zolfo Springs and Ona locations, respectively. There was a difference on RPP varieties response to glyphosate and triclopyr application. ‘Florigraze’ and ‘Ona 33’ were less tolerant to glyphosate compared to ‘UF-Tito’ and ‘Ecoturf’ at 30 d after treatment. Likewise, UF-Tito and Florigraze were less tolerant to triclopyr compared to Ona 33 and Ecoturf. Overall, Florigraze showed highest injury and at least 2-fold reduction on biomass compared to the other three varieties from glyphosate or triclopyr application. Results from this research indicate that glyphosate and triclopyr appear to be safe to apply to long-established RPP stands, but herbicide rate and RPP varieties should be considered if stands are <5 yr old.

A thorough understanding of commonly used herbicide application practices and technologies is needed to provide recommendations and determine necessary application education efforts. An online survey to assess ground and aerial herbicide application practices in Arkansas was made available online in spring 2019. The survey was direct-emailed to 272 agricultural aviators and 831 certified commercial pesticide applicators, as well as made publicly available online through multiple media sources. A total of 124 responses were received, of which 75 responses were specific to herbicide applications in Arkansas agronomic crops, accounting for approximately 49% of Arkansas’ planted agronomic crop hectares in 2019. Ground and aerial application equipment were used for 49% and 51% of the herbicide applications on reported hectares, respectively. Rate controllers were commonly used application technologies for both ground and aerial application equipment. In contrast, global positioning system-driven automatic nozzle and boom shut-offs were much more common on ground spray equipment than aerial equipment. Applicator knowledge of nozzles and usage was limited, regardless of ground or aerial applicators, as only 28% of respondents provided a specific nozzle type used, indicating a need for educational efforts on nozzles and their importance in herbicide applications. Of the reported nozzle types, venturi nozzles and straight-stream nozzles were the most commonly used for ground and aerial spray equipment, respectively. Spray carrier volumes of 96.3 and 118.8 L ha−1 for ground spray equipment and 49.6 and 59.9 L ha−1 for aerial application equipment were the means of reported spray volumes for systemic and contact herbicides, respectively. Respondents indicated application optimization was a major benefit of utilizing newer application technologies, herbicide drift was a primary challenge, and research needs expressed by respondents included adjuvants, spray volume efficacy, and herbicide drift. Findings from this survey provided insight into current practices, technologies, and needs of Arkansas herbicide applicators. Research and education efforts can be implemented as a result to address aforementioned needs while providing applied research-based information to applicators based on current practices.

The objective of this paper was to review the reproductive biology, herbicide-resistant (HR) biotypes, pollen-mediated gene flow (PMGF), and potential for transfer of alleles from HR to herbicide-susceptible grass weeds including barnyardgrass, creeping bentgrass, Italian ryegrass, johnsongrass, rigid (annual) ryegrass, and wild oats. The widespread occurrence of HR grass weeds is at least partly due to PMGF, particularly in obligate outcrossing species such as rigid ryegrass. Creeping bentgrass, a wind-pollinated turfgrass species, can efficiently disseminate herbicide resistance alleles via PMGF and movement of seeds and stolons. The genus Agrostis contains about 200 species, many of which are sexually compatible and produce naturally occurring hybrids and hybrids with species in the genus Polypogon. The self-incompatibility, extremely high outcrossing rate, and wind pollination in Italian ryegrass clearly point to PMGF as a major mechanism by which herbicide resistance alleles can spread across agricultural landscapes, resulting in abundant genetic variation within populations and low genetic differentiation among populations. Italian ryegrass can readily hybridize with perennial ryegrass and rigid ryegrass due to their similarity in chromosome numbers (2n = 14), resulting in interspecific gene exchange. Johnsongrass, barnyardgrass, and wild oats are self-pollinated species, so the potential for PMGF is relatively low and limited to short distances; however, seeds can easily shatter upon maturity before crop harvest, leading to wider dispersal. The occurrence of PMGF in reviewed grass weed species, even at a low rate, is greater than that of spontaneous mutations conferring herbicide resistance in weeds and thus can contribute to the spread of herbicide resistance alleles. This review indicates that the transfer of herbicide resistance alleles occurs under field conditions at varying levels depending on the grass weed species.

The evolution and widespread distribution of glyphosate-resistant broadleaf weed species catalyzed the introduction of dicamba-resistant crops that allow this herbicide to be applied POST to soybean and cotton. Applications of dicamba that are most cited for off-target movement have occurred in June and July in many states when weeds are often in high densities and at least 10 cm or taller at the time of application. For registration purposes, most field studies examining pesticide emissions are conducted using bare ground or very small plants. Research was conducted in Knoxville, TN, in the summer of 2017, 2018, and 2019 to examine the effect of application surface (tilled soil, dead plants, green plants) on dicamba emissions under field conditions. Dicamba emissions after application were affected by the treated surface in all years, with the order from least to most emissions being dead plants < tilled soil < green plant material. In fact, dicamba emissions were >300% when applied to green plants compared to other surfaces. These findings suggest that dicamba applications made to bare ground will likely underestimate what may occur under normal field use conditions when POST applications are made and the crop canopy or weed groundcover is nearly 100% green material. A potential change to enhance the accuracy of current environmental simulation models would be to increase the theoretical findings to allow for the effect of green plant material on dicamba emissions under field conditions.

In southern Australia, annual sowthistle and prickly lettuce have become more prevalent following the adoption of reduced tillage cropping systems. They are especially problematic in lentil and other pulse crops, which are weakly competitive and have few herbicide options available for POST control of broadleaf weeds. This study aimed to evaluate the influence of management in a previous cereal crop on weed densities in a subsequent crop. At two field sites, crop seeding density and POST herbicide treatments (a conventional choice that included metsulfuron-methyl and MCPA; and a proactive choice that included bromoxynil, picolinafen, and MCPA) were applied to a wheat crop, and weed density was assessed at the beginning of the following season to measure for a legacy effect of the treatments. Study site populations were also screened for herbicide resistance and were found to have high (≥90% survival) ALS inhibitor resistance. Crop competition treatments had no effect on weed populations, and effects of herbicide treatment were significant at only one of the sites. At this site, both herbicide treatments had lower weed densities than the nontreated in the first year, but the legacy effect was only significant for annual sowthistle density in the proactive treatment. At both sites, even where weeds were extremely sparse or completely controlled following herbicide treatment in the first year, moderate densities were observed the following year, indicating that colonization from the seedbank or adjacent areas could be contributing to weed numbers. Weed density assessments and accurate knowledge of the herbicide resistance status of target weeds should guide herbicide selection to maximize control.

Agronomic crops engineered with resistance to 2,4-D or dicamba have been commercialized and widely adopted throughout the United States. Because of this, increased use of these herbicides in time and space has increased damage to sensitive crops. From 2014 to 2016, cucumber and cantaloupe studies were conducted in Tifton, GA, to demonstrate how auxinic herbicides (namely, 2,4-D or dicamba), herbicide rate (1/75 or 1/250 field use), and application timing (26, 16, and 7 d before harvest [DBH] of cucumber; 54, 31, and 18 DBH of cantaloupe) influenced crop injury, growth, yield, and herbicide residue accumulation in marketable fruit. Greater visual injury, reductions in vine growth, and yield loss were observed at higher rates when herbicides were applied during early-season vegetative growth compared with late-season with fruit development. Dicamba was more injurious in cucumber, whereas cantaloupe responded similarly to both herbicides. For cucumber, total fruit number and relative weights were reduced (16% to 19%) when either herbicide was applied at the 1/75 rate 26 DBH. Cantaloupe fruit weight was also reduced 21% and 10% when either herbicide was applied at the 1/75 rate 54 or 31 DBH, respectively. Residue analysis noted applications made closer to harvest were more likely to be detectable in fruit than earlier applications. In cucumber, dicamba was detected at both rates when applied 7 DBH, whereas in cantaloupe, it was detected at both rates when applied 18 or 31 DBH in 2016 and at the 1/75 rate applied 18 or 31 DBH in 2014. Detectable amounts of 2,4-D were not observed in cucumber but were detected in cantaloupe when applied at either rate 18 or 31 DBH. Although early-season injury will more likely reduce cucumber or cantaloupe yields, the quantity of herbicide residue detected will be most influenced by the time interval between the off-target incident and sampling.

Proper management of glufosinate in glufosinate-resistant crop technologies is needed to mitigate the likelihood of resistance evolution. Antagonism may result from mixtures of glufosinate and other commonly used POST herbicides in soybean and cotton. Two experiments were conducted at the Arkansas Agricultural Research and Extension Center in Fayetteville, AR, in 2015 and 2016 to evaluate mixtures of glufosinate + clethodim and glufosinate + glyphosate on barnyardgrass, broadleaf signalgrass, johnsongrass, and large crabgrass. Furthermore, droplet spectra analyses were conducted to determine if droplet size was associated with identification of herbicide interactions. Antagonism was dependent on the herbicide rates and the weed species. For barnyardgrass and large crabgrass control 4 wk after treatment, glufosinate + glyphosate was antagonistic at all rates evaluated. When large crabgrass was evaluated, some mixtures (e.g., 595 g ha–1 glufosinate + 76 g ha–1 clethodim) had a significant reduction in control relative to one of the herbicides applied alone. Glufosinate (451 and 595 g ai ha–1) + glyphosate (867 and 1,735 g ae ha–1) was antagonistic at all four possible rate combinations for broadleaf signalgrass control. Fewer instances of antagonism were observed for seedling johnsongrass control than for other species, but certain treatments were identified as antagonistic (e.g., glufosinate at 451 g ai ha–1 + clethodim at 76 g ai ha–1). Overall, antagonism was less likely and greater control was observed when the highest rates of both herbicides in a given mixture were used. The addition of glyphosate or clethodim to glufosinate can increase the volume median diameter and decrease the percentage volume of fines, compared to glufosinate alone. The droplet spectra analyses indicate that the glufosinate performance may be negatively affected by the addition of glyphosate or clethodim.

The application of paraquat mixtures with residual herbicides before planting rice is a common treatment in Mississippi, and rice in proximity is susceptible to off-target movement of these applications. Four concurrent studies were conducted in Stoneville, MS, to characterize rice performance following exposure to a sublethal rate of paraquat, metribuzin, fomesafen, and cloransulam-methyl at different application timings. Herbicides were applied to rice at the growth stages of spiking to one-leaf (VEPOST), two- to three-leaf (EPOST), three- to four-leaf (MPOST), 7 d postflood (PFLD), and panicle differentiation (PD). Regardless of application timing, rice injury following exposure to paraquat was ≥45%. Delays in maturity were increased by 0.3 d d−1 following paraquat from emergence through PD. Dry weight, rough rice yield, panicle density, and germination were reduced by 18.7 g, 131.5 kg ha−1, 5.6 m−2, and 0.3%, respectively, per day from application of paraquat at emergence through PD. By 28 d after treatment (DAT), metribuzin injured rice 3% to 6%, and that injury did not translate into a yield reduction. Regardless of application timing, rice injury following fomesafen application ranged from 2% to 5% 28 DAT. Rice exposed to cloransulam-methyl EPOST exhibited the greatest root and foliar injury 21 DAT and 28 DAT, respectively. Additionally, when rice was exposed to cloransulam-methyl EPOST, yield was reduced to 6,540 kg ha−1 compared with a yield of 7,850 kg ha−1 from nontreated rice. Rice yield was negatively affected after paraquat was applied any time after rice emergence. However, applications of paraquat to rice at early reproductive growth stages reduced rough rice yield and seed germination the greatest. Application timing is crucial in determining severity of rice injury. Early-season injury to rice following paraquat application had less effect on yield compared with injury at later stages. Additionally, fields devoted to seed rice production are at risk for reduced seed germination if they are exposed to paraquat during early reproductive growth stages.

Herbicide management information is lacking for recently developed turf-type bahiagrass germplasm. The objective of this study was to evaluate the herbicide tolerance of nine experimental bahiagrass genotypes compared to the industry standard ‘Argentine’. The experimental entries included Argentine and ‘Wilmington’ mutants, and wild-type breeding lines. Plants were grown under greenhouse conditions, and 12 herbicides were applied at 1× and 2× labeled rates. Bentazon, bromoxynil, carfentrazone + 2,4-D + MCPP + dicamba, and carfentrazone were classified as safe. Fluroxypyr, halosulfuron, and triclopyr + clopyralid reduced growth >50% when applied at twice the label rate. Fenoxaprop, sulfentrazone + imazethapyr, and thiencarbazone + iodosulfuron + dicamba reduced growth and caused turfgrass injury above an acceptable threshold (≥20%). In general, the Argentine mutants showed greater herbicide injury compared to the Wilmington mutants. However, metsulfuron exceeded the acceptable injury threshold and stopped growth in all the genotypes, Argentine and genotype WT6 were the least injured by this herbicide. The experimental genotype WT6 consistently showed the greatest herbicide tolerance. Except for one genotype (WT4), the experimental genotypes responded similarly or better than Argentine to the tested herbicides, except for metsulfuron.

A field study was conducted in 2017 and 2018 at the Louisiana State University Agricultural Center H. Rouse Caffey Rice Research Station near Crowley, LA, to evaluate the impact of reduced rates of halosulfuron on quizalofop activity in Louisiana rice production. Halosulfuron and a prepackaged mixture of halosulfuron plus thifensulfuron were evaluated at 0, 17, 35, or 53 g ai ha−1 and 34 or 53 g ai ha−1, respectively, in a mixture with quizalofop at 120 g ai ha−1. Control of barnyardgrass, red rice, and two non-acetyl-CoA carboxylase resistant rice lines, CL-111 and CLXL-745, were recorded at 14 and 28 d after treatment (DAT). The red rice, CL-111, and CLXL-745 represented a weedy rice population. Across all species evaluated at 14 DAT, all mixtures containing halosulfuron and halosulfuron plus thifensulfuron resulted in antagonism with an observed control of 79% to 90%, compared with an expected control of 96% to 99%. At 28 DAT, all mixtures containing halosulfuron resulted in neutral interactions for barnyardgrass control. Quizalofop mixed with halosulfuron plus thifensulfuron at the lower rate of 34 g ha−1 was able to overcome the antagonism compared with the higher rate of 53 g ha−1 for barnyardgrass control at 28 DAT. Both the high and the low rate of halosulfuron plus thifensulfuron resulted in antagonistic interaction for red rice, CL-111, and CLXL-745 control at 28 DAT. This research suggests that mixing quizalofop with halosulfuron plus thifensulfuron should be avoided, especially at the higher rate of 53 g ha−1.

The loss of methyl bromide led vegetable growers to rely more heavily on herbicides to control weeds. Although herbicides can be effective, limited options in vegetable production challenge growers. Identifying new, effective tools to be applied over plastic mulch before planting, for improved weed control with minimal crop injury, would be beneficial. The objective of these experiments was to evaluate the persistence of preplant applications of glyphosate (1,125 or 2,250 g ae ha−1) plus 2,4-D (1,065 or 2,130 g ae ha−1) or dicamba (560 g ae ha−1) over plastic mulch, using analytical techniques and subsequent yellow squash and watermelon response. Glyphosate and 2,4-D were not analytically detected at damaging concentrations on plastic mulch when at least 3.5 cm of rainfall was received after application and before planting. In addition, bioassay results showing less than 10% visual injury for either squash and watermelon, with no growth or yield suppression observed, supported analytical results. In contrast, dicamba concentrations on plastic mulch, regardless of rainfall amount or time between application and planting, remained at damaging levels. Squash yields were reduced by dicamba applied 1 to 30 d before planting, whereas watermelon was more resilient. 2,4-D plus glyphosate applied preplant over plastic mulch can provide an additional herbicide option for vegetable growers. More research is needed to understand the impact of residual activity of 2,4-D when transplants land directly in holes in plastic mulch at the time of application. The relationship of dicamba with plastic mulch is complex, because the herbicide cannot be easily removed by rainfall. Thus, dicamba should not be included in a weed management system in plasticulture vegetable production.

Kochia accessions (designated as KS-4A and KS-4H) collected from a corn field near Garden City, KS, have previously shown multiple resistance to glyphosate, dicamba, and fluroxypyr. These accessions were also suspected as being resistant to photosystem II (PS II) inhibitors. The main objectives of this research were to 1) confirm the coexistence of cross-resistance to PS II inhibitors (atrazine and metribuzin) applied PRE and POST, 2) investigate the underlying mechanism of PS II-inhibitor resistance, and 3) determine the effectiveness of alternative POST herbicides for control of these multiple herbicide–resistant (MHR) kochia accessions. Results from dose-response experiments revealed that the KS-4A and KS-4H kochia accessions were 23-fold to 48-fold resistant to PRE- and POST-applied atrazine and 13-fold to 18-fold resistant to POST-applied metribuzin compared to a known susceptible kochia accession (KS-SUS). Both accessions also showed putative resistance to PRE-applied metribuzin that needs to be confirmed. Sequence analyses of the psbA gene further revealed that all samples from the KS-4A and KS-4H kochia accessions had a Ser264Gly point mutation. A pretreatment with malathion followed by a POST application of atrazine at 1,120 g ha−1 or metribuzin at 630 g ha−1 did not reverse the resistance phenotypes of these MHR accessions. In a separate greenhouse study, alternative POST herbicides, including bicyclopyrone + bromoxynil; bromoxynil + pyrasulfotole; paraquat alone or in combination with atrazine, metribuzin, 2,4-D, or saflufenacil; and saflufenacil alone or in combination with 2,4-D effectively controlled the KS-4H accession (≥97% injury). To our knowledge, this research reports the first case of kochia accessions with cross-resistance to PRE-applied atrazine and POST-applied metribuzin. Growers should adopt diversified weed control strategies, including the use of competitive crops, cover crops, targeted tillage, and harvest weed seed control along with effective alternative PRE and POST herbicides with multiple sites of action to control MHR kochia seedbanks on their production fields.

Atrazine applied at planting is commonly used for weed control in corn. With global climate change causing an increase in river flooding in the United States over the past decade, producers need information to determine the best course of action in flooded fields treated with atrazine into which they wish to immediately plant soybean. Studies were designed to understand the effect of flooding on atrazine residual activity including atrazine concentration, soybean injury, and soybean yield. In 2012, soybean yield in flooded treatments was reduced by prior atrazine application. In 2014, soybean injury was <10% in all plots, and nonflooded, atrazine-treated soils had yields equal to the nontreated. Findings from this research indicated that it is possible for producers to consider replanting soybean after atrazine application, with appropriate changes to product labeling.

Throughout eastern Arkansas, Palmer amaranth resistant to protoporphyrinogen oxidase (PPO)-inhibiting herbicides (Group 14 herbicides) has become widespread. Most PPO-resistant Palmer amaranth biotypes possess a target-site mutation, but a metabolic resistance mechanism to fomesafen (Group 14) has also been identified. Once metabolic resistance manifests, plants may also be tolerant to other herbicides and sites of action. To evaluate whether varying spray parameters affected control of PPO-resistant Palmer amaranth in dicamba-tolerant crops, field trials were conducted in 2017 and 2018 at the Lon Mann Cotton Research Station near Marianna, AR, and on-farm in Marion, AR. The experiment included split plot factors of dicamba rate, nozzle type, and carrier volume, with a whole plot factor of population. Dicamba was applied at 560 or 1120 g ae ha−1 through 110015 TTI or AirMix nozzles at 70 or 140 L ha−1 to PPO-resistant or PPO-susceptible Palmer amaranth. Palmer amaranth control 14 d after treatment (DAT) was influenced by an interaction between population and carrier volume. PPO-resistant Palmer amaranth control 14 DAT was 81% regardless of carrier volume, compared with 90% and 95% control at 70 and 140 L ha−1, respectively, of the PPO-susceptible population. An interaction between nozzle type and carrier volume influenced Palmer amaranth control 21 DAT, whereas AirMix nozzles at 140 L ha−1 controlled Palmer amaranth at a greater level (94%) than any other nozzle and carrier volume combination (≤90%). An interaction between population and dicamba rate influenced the relative density of Palmer amaranth 21 DAT. PPO-resistant Palmer amaranth density was less affected by dicamba at either rate than PPO-susceptible Palmer amaranth, relative to the nontreated check. Results concur with those of other research that suggest PPO-resistant Palmer amaranth is harder to control with dicamba. Otherwise, increasing carrier volume affected overall Palmer amaranth control to a greater degree than any other factor.

Yellow nutsedge is one of the most widely distributed and troublesome weeds in the world. Field and greenhouse studies were conducted to optimize strategies for increased yellow nutsedge control in turfgrass with halosulfuron and sulfentrazone. In the field study in yellow nutsedge and perennial ryegrass mixture, single or sequential applications (3 wk after initial) of halosulfuron or sulfentrazone were made on June 3, June 23, July 15, or August 5 in 2013, 2014, 2015, and 2016. Percent yellow nutsedge control was rated within the same growing season on September 17 and the following year on June 3 for carryover control. Field and greenhouse studies confirm that sequential applications of halosulfuron with a 3-wk interval resulted in >95% control in a yellow nutsedge–turfgrass mixture. In a greenhouse study, both herbicides reduced yellow nutsedge root and rhizome dry mass from 39% to 98%, reduced number of new tubers and tuber fresh weight from 38% to 100%, and prevented re-emergence. Sequential applications of either herbicide within a 3-wk interval early postemergence is recommended for optimal control. Herbicide application to yellow nutsedge using halosulfuron and sulfentrazone should be made as early as possible postemergence, preferably at the three- to five-leaf stage or 200 to 250 growing degree days (GDD, 10 C base). Mowing can be an effective method to reduce yellow nutsedge growth. Mowing at 7.6 cm weekly reduced yellow nutsedge rhizome dry mass by 55% and number of new tubers formed by 63% in the greenhouse study. Physical removal of yellow nutsedge plants such as hand-pulling can be an effective method to manage yellow nutsedge and is most effective at the three- to five-leaf stage (200 to 250 GDD). End-users can maximize yellow nutsedge control by integrating early herbicide treatments and cultural practices such as mowing and hand-pulling.

The herbicide 2,4-D is used in a variety of cropping systems, especially in grasses because it is a selective postemergence broadleaf herbicide. However, the most common formulation (2,4-D dimethylamine) is antagonized when mixed in hard water. The objective of this research was to determine which formulations of 2,4-D or premixes of various formulations of synthetic auxin herbicides are subject to hard water antagonism. Formulations surveyed for hard water antagonism in the first experiment included 2,4-D dimethylamine, 2,4-D diethanolamine, 2,4-D monomethylamine, 2,4-D isopropylamine salt, 2,4-D choline salt, 2,4-D isooctyl ester, and 2,4-D ethylhexyl ester. Synthetic auxin formulation types in the second experiment included water-soluble, emulsifiable concentrates and emulsion-in-water. All formulations were mixed with both soft and hard water (600 mg CaCO3 L−1) and applied to dandelions to determine whether antagonism occurred in hard water. Water-soluble (amine and choline) 2,4-D formulations were antagonized by hard water, but water-insoluble (ester) 2,4-D formulations were not antagonized. Similar results were found by formulation type with water-soluble synthetic auxin premixes antagonized but emulsifiable concentrates not antagonized. Furthermore, water-soluble salt formulations were not antagonized when formulated in premixes with other synthetic auxin herbicides as an emulsion-in-water. This research demonstrates that all 2,4-D water-soluble formulations and water-soluble premixes with phenoxycarboxylic acid herbicides are subject to hard water antagonism. Formulations of 2,4-D containing emulsifying agents protect against antagonism by the water-insoluble nature of ingredients in their formulation.

Wood vinegar, a product of pyrolysis, can induce phytotoxicity on plants when applied at an adequate rate and concentration. The objective of this research was to investigate wood vinegar obtained from the pyrolysis of apple tree branches for weed control in dormant zoysiagrass. In environment-controlled growth chambers, white clover visual injury and shoot mass reduction were evaluated and compared to the nontreated control after wood vinegar application at 1,000, 2,000, or 4,000 L ha−1 under 10 C or 30 C temperature conditions. Averaged across rates, wood vinegar rapidly desiccated white clover and caused 83% and 71% visual injury at 10 C and 30 C, respectively, at 1 d after treatment (DAT). Averaged across temperatures, wood vinegar at 1,000, 2,000, and 4,000 L ha−1 reduced white clover shoot mass by 56%, 81%, and 98% from the nontreated control at 10 DAT, respectively. In field experiments, weed control increased as wood vinegar rates increased from 1,000 to 5,000 L ha−1 in dormant zoysiagrass. The effective application dose of wood vinegar required to provide 90% control (ED90) of annual fleabane, Persian speedwell, and white clover was determined to be 2,450, 2,300, and 4,020 L ha−1, respectively, at 2 wk after treatment. Turf quality did not differ among the wood vinegar treatments and the nontreated control when zoysiagrass completely recovered from dormancy. Overall, results illustrate that wood vinegar resulting from the pyrolysis of apple tree branches can be used as a nonselective herbicide in dormant turfgrass, offering a new nonsynthetic herbicide option for weed control in managed turf.