Manufacturers of several POST corn herbicides recommend tank-mixing their herbicides with atrazine to improve performance; however, future regulatory changes may place greater restrictions on atrazine use and limit its availability to growers. Our research objectives were to quantify the effects of tank-mixing atrazine with tembotrione compared to tembotrione alone on (1) weed control, (2) variability in weed control, and (3) sweet corn yield components and yield variability. Field studies were conducted for 2 yr each in Illinois, Oregon, Washington, and Ontario, Canada. Tembotrione at 31 g ha−1 was applied alone and with atrazine at 370 g ha−1 POST at the four- to five-collar stage of corn. The predominant weed species observed in the experiment were common to corn production, including large crabgrass, wild-proso millet, common lambsquarters, and velvetleaf. For nearly every weed species and species group, the addition of atrazine improved tembotrione performance by increasing mean levels of weed control 3 to 45% at 2 wk after treatment. Adding atrazine reduced variation (i.e., standard deviation) in control of the weed community by 45%. Sweet corn ear number and ear mass were 9 and 13% higher, respectively, and less variable when atrazine was applied with tembotrione, compared to tembotrione alone. Additional restrictions or the complete loss of atrazine for use in corn will necessitate major changes in sweet corn weed management systems.

Managing glyphosate-resistant (GR) horseweed in no-till cotton continues to be a serious challenge for midsouthern producers. Field studies were conducted in 2008 and 2009 to evaluate spring burndown applications of saflufenacil on GR horseweed prior to planting cotton. Saflufenacil controlled GR horseweed at least 94% up to 7 d before planting (DBP) without causing significant cotton injury. Saflufenacil applied at 7 or 14 DBP controlled GR horseweed while still providing residual control until planting. Moreover, saflufenacil, on silt loam soil evaluated in this study, showed no more injury than dicamba applied 7 or more DBP. Results indicated that saflufenacil is an option in cotton for controlling GR horseweed much closer to cotton planting than 42 DBP (current saflufenacil label). At 25 g ha−1, which is the standard labeled rate in cotton, saflufenacil provided > 90% control of GR horseweed. Saflufenacil as a GR horseweed burndown, could replace the current dicamba standard every other year to reduce the probability of horseweed developing resistance to dicamba or salflufenacil.

Weeds are a major biotic constraint to aerobic rice production in Asia. Research is needed on the effects of cultural practices on weed management in aerobic rice, including techniques such as planting pattern and competitive cultivars. Field experiments were conducted in Punjab, India, in the wet seasons of 2008 and 2009 to study the growth of weeds and two rice cultivars [PR 115 and Punjab (P.) Mehak 1] in relation to planting pattern (uniform rows [23-cm row spacing] and paired rows [15-, 30-, and 15-cm row spacings]) under aerobic conditions. Junglerice and rice flatsedge were the dominant weed species during the early stages of the crop, while Chinese sprangletop and large crabgrass were the predominant species during flowering stage of the crop. Weed dry matter was not affected by planting pattern of P. Mehak 1; however, for PR 115, weed dry matter was greater in rice grown in uniform rows (244 g m−2) than in paired rows (183 g m−2). Planting patterns did not affect weed-free crop growth and yield, but weeds tended to be more abundant in the uniform planting system, particularly under cultivar PR 115. Consequently, this cultivar grew and yielded better under the paired rows when weeds were present. The cultivar PR 115 had greater yield potential than P. Mehak 1, but growth and productivity of P. Mehak 1 were unaffected by the planting patterns, suggesting better competitive ability against weeds than PR 115. The results imply that yield of some aerobic rice cultivars may be improved by exploring competitiveness of rice cultivars through paired row planting patterns. There is a need to study plasticity changes for cultivars which respond with more competiveness in paired rows. The identified traits could be useful as selection criteria for screening weed-competitive cultivars in paired row pattern.

Field, greenhouse, and laboratory studies were conducted to determine the effect of MCPA ester, fertilizer type, and fertilizer rate on feral rye control with imazamox. In field studies near Sidney, NE, increasing the concentration of liquid ammonium phosphate (10–34–0) from 2.5 to 50% of the spray solution decreased feral rye control with imazamox by as much as 73%. Conversely, adding MCPA ester to imazamox significantly increased feral rye control in field studies by up to 77%. Initial greenhouse studies confirmed the liquid ammonium phosphate antagonism effect, but subsequent greenhouse studies were inconsistent with regard to the interaction between fertilizer and imazamox. At least one source of liquid ammonium phosphate was shown not to be antagonistic, and therefore fertilizer source or contaminants may be responsible for initial field observations. Greenhouse studies confirmed the synergistic interaction between MCPA and imazamox. MCPA ester applied at 560 g ai ha−1 decreased the rate of imazamox required to cause 50% reduction in feral rye dry weight (GR50) to 13 g ha−1 compared to 35 g ha−1 for imazamox alone. Although addition of MCPA ester increased 14C-imazamox absorption by 8% in laboratory studies, less 14C translocated out of the treated leaf; therefore the mechanism of synergism does not appear to be related to imazamox absorption or translocation.

Research was conducted at experimental research stations near Keiser and Marianna (Marianna-A), AR, in 2007, and in a grower's field near Marianna (Marianna-B), AR, in 2008, to compare herbicide programs, including POST application(s) of glyphosate/glufosinate alone or in combination with residual herbicides applied as PRE, mid-POST (MPOST), or layby POST-directed (PD) in enhanced glyphosate- and glufosinate-resistant cotton. Weed species evaluated included Palmer amaranth, pitted morningglory, hemp sesbania, barnyardgrass, and a mixture of large crabgrass and goosegrass. At Marianna-B, AR, the Palmer amaranth population was a mixture of glyphosate-resistant and -susceptible plants. For both cotton cultivars and at all locations, inclusion of S-metolachlor plus fluometuron PRE increased weed control and/or decreased the number of glufosinate or glyphosate applications needed in-season. At Marianna-B, AR, PRE residual herbicides and/or glufosinate were required to control glyphosate-resistant Palmer amaranth. Addition of pyrithiobac to glufosinate or glyphosate did not increase weed control. A layby PD application of flumioxazin plus MSMA was required to increase late-season control of all weed species in POST glufosinate-only programs, but not in POST glyphosate-only programs. None of the programs caused > 5% injury to either cotton cultivar. Seed-cotton yield was similar in all herbicide programs at Keiser, AR, and Marianna-A, AR, except for the POST glyphosate-only program, which yielded less than the PRE followed by POST programs in glyphosate-resistant cotton at Keiser, AR. In general, PRE herbicides did not increase cotton yield but did improve early and late-season control of glyphosate-susceptible and -resistant weeds in both cotton cultivars.

Field studies were conducted in 2007 and 2008 near Lubbock and Lamesa, TX, to determine the effects of propazine alone and in combination with glyphosate applied PRE and POST on cotton growth, yield, and lint value (fiber quality). Propazine at 0.56, 0.84, and 1.12 kg ai ha−1 and in combination with glyphosate at 0.86 kg ae ha−1 was applied PRE, early POST, and mid-POST. Up to 11% injury was observed after propazine applied early POST and mid-POST at Lubbock in 1 of 2 yr, and up to 13% at all three application timings was observed at Lamesa in 1 of 2 yr. The greatest injury was observed 58 d after application following propazine at 1.12 kg ai ha−1 applied PRE; however, no injury was apparent 80 d after application. Cotton yield, lint values, and gross revenues were not affected by any treatment.

Research was conducted for 2 yr at Marianna, AR, to determine whether the fall-planted cover crops rye, wheat, turnip, and a blend of brown and white mustard (Caliente) would aid weed management programs in conservation-tilled, enhanced, glyphosate-resistant cotton. Wheat and rye easily were established both years and turnip and mustard blend stands were better in the second year. The cover crops alone were more suppressive of Palmer amaranth, pitted morningglory, and goosegrass in 2007 than in 2008. Rye was generally superior to wheat in suppressing the three evaluated weeds. Once herbicides were applied, there were seldom differences among cover crops for a particular herbicide program as a result of the highly efficacious herbicide programs. Cotton yields were not affected by wheat, rye, or the mustard blend, but yields were lowest in plots that followed turnip both years, possibly because of allelopathy. Integration of cover crops, especially cereals, into conservation-tilled, glyphosate-resistant cotton aided early-season weed management and could reduce the selection of glyphosate for herbicide resistance.

Velvetleaf is one of the most significant and fastest spreading alien weeds in Europe, and it is a difficult weed to control in conventional sugarbeet. Laboratory experiments were carried out in 2007 and 2008 and field experiments were carried out in 2006, 2007, and 2008 with the aim of finding effective herbicide combinations and optimum timing of control. Herbicides containing the active ingredients phenmedipham, desmedipham, ethofumesate, clopyralid, and triflusulfuron were all tested at different timings. Phenmedipham + desmedipham + ethofumesate gave 87% velvetleaf control in pot experiments when applied at the growth stages of velvetleaf cotyledons and one true leaf, but only 27 to 42% control in field trials. Triflusulfuron gave 76% control in pot experiments and 83 to 88% control in field experiments. The timing of the first and second herbicide applications was very important: the first application of herbicides must be at the cotyledon stage of velvetleaf. A 1-wk delay in first application reduced herbicide efficacy by 8%. A 5-d period between the first and second treatments gave 93% control, while a 10-d period between the first and second treatments gave only 77% control. Sugarbeet yield decreased by 60 to 86% due to competition with velvetleaf when a standard herbicide combination (phenmedipham + desmedipham + ethofumesate) was used, and the velvetleaf produced between 6,700 and 14,800 seeds m−2. Inclusion of triflusulfuron in the herbicide treatment significantly reduced velvetleaf seed production to between 200 and 4,700 seeds m−2. In most cases, inclusion of triflusulfuron increased sugarbeet yield. Better velvetleaf control occurred in years when the sugarbeet canopy developed early and the index of leaf area of sugarbeet was higher.

With the number of glyphosate-resistant weed species increasing in North America and a lack of new herbicide chemistries being developed, growers are shifting toward using older herbicides that are more expensive and may be less environmentally friendly. Therefore, to determine which weed management strategies are most cost effective and have the lowest impact on the environment we evaluated the efficacy, environmental impact, and the profitability of several weed management strategies in glyphosate-resistant soybean over a 3-yr period (2007 to 2009) at three locations in southwestern Ontario, Canada. No visible injury to soybean was observed with the herbicide treatments evaluated. A sequential application of glyphosate consistently provided high levels of weed control (99 to 100%) at 56 d after treatment in comparison with one- or two-pass herbicide programs. Soybean yield did not differ between the two-pass herbicide programs and glyphosate applied early POST; however, a yield benefit was found with a sequential application of glyphosate or a PRE herbicide followed by glyphosate compared with glyphosate applied only at late POST. The two-pass herbicide programs had higher environmental impact (EI) (> 23) than the one-pass herbicide programs (< 15), except when imazethapyr was followed by or tank-mixed with glyphosate, which had an equivalent EI (∼ 14) to the one-pass herbicide programs. Not surprisingly because of the low purchase price of glyphosate, gross margins were highest for treatments that included glyphosate. However, to reduce the selection pressure on glyphosate-resistant weed biotypes, to reduce environmental impact, and to increase gross margins a combination of glyphosate with another mode of action would be most beneficial. In this study glyphosate + imazethapyr was the best alternative to a sequential two-pass glyphosate program.

Glyphosate-resistant (GR) Palmer amaranth has become a serious pest in parts of the Cotton Belt. Some GR cotton cultivars also contain the WideStrike™ insect resistance trait, which confers tolerance to glufosinate. Use of glufosinate-based management systems in such cultivars could be an option for managing GR Palmer amaranth. The objective of this study was to evaluate crop tolerance and weed control with glyphosate-based and glufosinate-based systems in PHY 485 WRF cotton. The North Carolina field experiment compared glyphosate and glufosinate alone and in mixtures applied twice before four- to six-leaf cotton. Additional treatments included glyphosate and glufosinate mixed with S-metolachlor or pyrithiobac applied to one- to two-leaf cotton followed by glyphosate or glufosinate alone on four- to six-leaf cotton. All treatments received a residual lay-by application. Excellent weed control was observed from all treatments on most weed species. Glyphosate was more effective than glufosinate on glyphosate-susceptible (GS) Palmer amaranth and annual grasses, while glufosinate was more effective on GR Palmer amaranth. Annual grass and GS Palmer amaranth control by glyphosate plus glufosinate was often less than control by glyphosate alone but similar to or greater than control by glufosinate alone, while mixtures were more effective than either herbicide alone on GR Palmer amaranth. Glufosinate caused minor and transient injury to the crop, but no differences in cotton yield or fiber quality were noted. This research demonstrates glufosinate can be applied early in the season to PHY 485 WRF cotton without concern for significant adverse effects on the crop. Although glufosinate is often less effective than glyphosate on GS Palmer amaranth, GR Palmer amaranth can be controlled with well-timed applications of glufosinate. Use of glufosinate in cultivars with the WideStrike trait could fill a significant void in current weed management programs for GR Palmer amaranth in cotton.

Glyphosate-resistant (GR) horseweed management continues to be a challenge in no-till cotton systems in Tennessee and Mississippi. Field studies were conducted in 2009 and 2010 to evaluate saflufenacil in tank mixtures with glyphosate, glufosinate, or paraquat on GR horseweed prior to planting cotton. Saflufenacil and saflufenacil tank mixtures were applied 7 d before planting (DBP). Three broad spectrum herbicides were tank-mixed with saflufenacil at rates of 0, 6.3, 12.5, 25, and 50 g ai ha−1. Saflufenacil at 25 and 50 g ai ha−1 in tank mixture with all three broad-spectrum herbicides provided similar GR horseweed control when compared to the current standard of glyphosate + dicamba. Across all saflufenacil rates, lint cotton yield among the glyphosate, glufosinate, and paraquat tank mixture treatments did not differ from each other. Control of horseweed with 25 or 50 g ha−1 of saflufenacil across all tank mixtures also was not different from the standard of glyphosate + dicamba. Moreover, saflufenacil, on silt loam soil evaluated in this study, showed no more cotton injury than glyphosate applied 7 d or more before planting. Saflufenacil applied alone at 25 g ha−1 provided lower control of GR horseweed than the standard, which translated to lower lint yield compared to the glyphosate + dicamba treatment or saflufenacil with each tank mixture partner. The 12.5 g ha−1 rate of saflufenacil tank mixed with either paraquat or glufosinate provided less horseweed control (< 85%) than if higher rates of saflufenacil were used (> 95%). However, lint cotton yield was not different between these treatments. This research suggests that saflufenacil at 25 g ha−1 is the most optimal rate for tank mixtures with glyphosate, glufosinate, or paraquat. It also reaffirms earlier research that the 25 g ha−1 saflufenacil rate safely can be applied inside the currently labeled 42-d waiting period between a saflufenacil application and cotton planting.

A field experiment was conducted during three cropping seasons to compare weed control and cotton yield provided by conventional (CV), glufosinate-resistant (LL), and glyphosate-resistant (RR) weed management systems under standard (102 cm) and narrow (38 cm) row spacing grown in conventional and conservation tillage systems. The conventional tillage and/or CV cotton received a PRE application of pendimethalin. The CV, LL, and RR cotton varieties received two POST applications of pyrithiobac, glufosinate, and glyphosate, respectively, at two- and four-leaf cotton growth stages. A final (LAYBY) application of trifloxysulfuron was applied to 38-cm row cotton while a LAYBY POST-directed spray of prometryn plus MSMA was used in 102-cm row cotton. The LL and RR weed management systems controlled at least 97% of large crabgrass, Palmer amaranth, sicklepod, and smallflower morningglory, while the CV system controlled 89, 73, and 87 to 98% of large crabgrass, smallflower morningglory, and Palmer amaranth, respectively. Sicklepod control increased from 85% in 102-cm rows to 95% in 38-cm rows in the CV herbicide system. Yellow nutsedge and pitted morningglory control exceeded 98% and was not affected by tillage, row spacing, or weed management system. Cotton yield was not affected by row spacing any year, by tillage in 2005, or by weed management system in 2004 and 2005. In 2006, yield in the RR weed management system was 27 and 24% higher than LL and CV weed management systems, respectively. In 2004, yield of conventional tillage cotton was 18% higher than conservation tillage cotton, but in 2006 the yield in conservation tillage was 12% higher than conventional tillage.

Field studies were conducted in 2007 and 2008 at seven sites in Ohio, Indiana, and Illinois to determine the effect of PRE herbicide and POST application timing on weed control and yield of glyphosate-resistant corn. Levels of PRE herbicide included none; low—atrazine; medium—atrazine and metolachlor; and high—atrazine, mesotrione, and metolachlor. Glyphosate was applied POST when corn was 30 cm tall, or 1 or 2 wk later. Common lambsquarters, giant foxtail, and giant ragweed infested at least six of the seven sites, and other weed species occurred at two to three sites. Control of weeds at the time of POST application ranged from 48 to 91%, 58 to 99%, and 87 to 100% for the low, medium, and high levels of PRE herbicide, respectively, averaged over POST application timing. Control of giant foxtail and redroot pigweed decreased by about 20% between the second and third POST timing, averaged over PRE herbicide, but control of other weeds was similar among timings. Late-season control of common ragweed, velvetleaf, common lambsquarters, and Pennsylvania smartweed exceeded 90%, regardless of PRE herbicide or POST timing. Control of redroot pigweed, ivyleaf morningglory, and giant ragweed was as low as 74, 67, and 83%, respectively, but the high level of PRE herbicide resulted in 90 to 97% control of these weeds. An interaction between PRE herbicide and POST timing for late-season control of giant foxtail, tall waterhemp, and yellow nutsedge reflected the more effective control among POST timings from the higher levels of PRE herbicide. The overall trend in this study was for more effective weed control in PRE/POST herbicide programs with more comprehensive PRE herbicides that have substantial activity on both grass and broadleaf weeds. Highest yield occurred where the PRE treatment consisted of a two- or three-way combination of herbicides applied at 50% of the recommended rate or higher. Yield was reduced at all POST timings with atrazine alone or in the absence of PRE herbicide.

Field studies were conducted to compare the response of one inbred (‘CL161’) and two hybrid (‘CLXL729’ and ‘CLXL745’) Clearfield (CL) rice cultivars to imazamox. Imazamox was applied at 44 and 88 g ai ha−1 to rice in the panicle initiation (PI) and PI plus 14 d (PI + 14) growth stages and at 44 g ha−1 to rice in the midboot growth stage. Maturity of hybrid CL cultivars was delayed following imazamox at 44 g ha−1 applied at PI + 14 and midboot. Furthermore, imazamox at 44 g ha−1, applied at midboot, delayed maturity of CLXL745 more than CLXL729. Expressed as a percentage of the weed-free control plots, rough rice yields for CLXL729 were 91% following imazamox at 44 g ha−1 applied at PI + 14, 78% following imazamox at 44 g ha−1 applied at midboot, and 77% for imazamox at 88 g ha−1 applied at PI + 14. Rough rice yield for CLXL745 was 77 to 92% of the control following all imazamox treatments. All imazamox treatments reduced CLXL745 rough rice yield compared with CL161. Rough rice yield, pooled across CL cultivar, varied with imazamox treatment between years, and these differences may have been a consequence of lower temperatures and solar radiation in the first year. Hybrid CL cultivars CLXL729 and CLXL745 were less tolerant than was CL161 when imazamox was applied at nonlabeled rates (88 g ha−1) and/or timings (PI + 14 or midboot). Because of variability in rice growth stages and irregularities in imazamox application in commercial fields, inbred CL cultivars should be planted where an imazamox application will likely be required.

Field studies at six locations over 3 yr in Kansas compared pyroxsulam at two application timings to competitive standards for winter annual weed control in winter wheat. Pyroxsulam applied fall-POST (FP) controlled downy brome 84 to 99% and was similar to or greater than sulfosulfuron, propoxycarbazone, or propoxycarbazone plus mesosulfuron. Downy brome control was lower when application timing was delayed until spring (SP), such that no herbicide provided more than 90% downy brome control. Cheat control was 97% or more with almost all herbicides applied FP, and greater than 90% in most locations when herbicides were applied SP. Sulfosulfuron was the exception with only 30 to 81% cheat control. All FP-applied herbicides, except sulfosulfuron at Manhattan, KS, controlled blue mustard 95% or more. Pyroxsulam and propoxycarbazone plus mesosulfuron FP completely controlled henbit at Hesston, KS, in 2009, but no herbicide treatment provided more than 60% control when applied SP. Averaged over application timings, pyroxsulam provided the greatest henbit control (76 and 78%) at Manhattan and Hays, respectively, in 2009, and FP treatments were 33 and 28 percentage points more effective than SP treatments at those locations. Averaged over application timing, wheat yields did not differ between herbicide treatments in five of six locations. Averaged over herbicide treatment, FP-treated wheat yielded more grain than SP-treated wheat at three of the six locations.

Weeds are a major constraint to rice production in labor-limited, upland rice-based systems in West Africa. The effects of weeding regimes and rice cultivars on weed growth and rice yield were investigated at two upland locations (Abomey-Calavi and Niaouli) in the degraded coastal savanna zone of Benin in 2005 and 2006 with below-average rainfall. Four weeding regimes (hoe weeding at 21 d after sowing [DAS], delayed hoe weeding at 31 DAS, hoe weeding at 21 and 42 DAS, and a no weeding control) were the main plot treatments. Cultivars comprising three interspecific upland rice cultivars (NERICA 1, NERICA 2, and NERICA 7) and the parents (Oryza sativa WAB56-104 and O. glaberrima CG14) were tested in subplots. The most dominant weed species identified were Jamaican crabgrass, Mariscus, and silver spinach. Rice yield was generally low because of drought stress; none of the experiments had a higher mean yield than 1,400 kg ha−1 across cultivars. Across cultivars, the best weeding regimes in terms of weed control and rice yields were single weeding at 31 DAS (W31) and double weeding at 21 and 42 DAS (W21+42). Under these weeding regimes, WAB56-104 out-yielded the three NERICA cultivars. CG14 showed the strongest weed suppressive ability (WSA) in Abomey-Calavi but did not have strong WSA in Niaouli because of lower biomass accumulation. WSA of WAB56-104 was similar to that of the three NERICA cultivars. Single weeding at 31 DAS, together with the use of cultivars with good adaptation to unfavorable rice growing conditions, would increase land and labor productivity of upland rice-based systems in West Africa.

Research was conducted in 2007 and 2008 to evaluate weed-control options in an imazethapyr-resistant rice production system. Raised beds were formed, and imidazolinone-resistant hybrid rice ‘CL 730’ was drill-seeded on beds. Five herbicide programs applied up to the four- to six-leaf stage of rice were evaluated with and without additional “as-needed” herbicide at later stages. All the herbicide combinations and as-needed herbicides tested in this research were labeled for rice, and only minor transient injury (< 5%) was initially observed. Weeds emerged throughout the growing season, and as-needed herbicides were applied after the four- to six-leaf stage of rice to control these late-emerging weeds and weeds not effectively controlled with earlier applications, primarily Palmer amaranth. Most of the Palmer amaranth at this site was insensitive to imazethapyr (possibly acetolactate synthase resistant). Therefore, application of as-needed herbicides with different modes of action, such as 2,4-D, were used to improve Palmer amaranth control. Rice yields were often numerically higher in plots that received additional herbicide after the six-leaf stage of rice, but yields were not significantly improved.

Field studies were conducted in 2007 and 2008 at the University of Arkansas at Pine Bluff farm near Lonoke to evaluate and compare the effects of low rates of glufosinate and glyphosate on rice. Two rice cultivars were seeded, and glyphosate and glufosinate were applied at 1/2, 1/4, and 1/8 of the labeled use rate of 870 g ae ha−1 and 616 g ai ha−1, respectively, at the three- to four-leaf, panicle initiation (PI), and boot stages. Rice canopy height reductions, reduction in flag leaf length, prolonged maturity, and yield losses were caused by both herbicides at all evaluated application timings. Although both herbicides caused significant injury, symptoms varied greatly between the two herbicides. Glufosinate injury to rice was more rapid and visually intense than with glyphosate. Glufosinate symptoms, which consisted of rapid necrosis, were visible in 1 to 2 d, whereas glyphosate symptoms, stunting and chlorosis, became visible after 7 to 10 d or not at all depending on time of application. Glyphosate applied at the 1/2× rate to rice in the boot growth stage caused less than 10% injury at 3 wk after treatment but resulted in 80% yield loss. Glufosinate at boot caused 80% injury and 80% yield loss. Glyphosate symptoms from PI and boot timings were typically only visible at heading and included malformed panicles and shortened flag leaves. Harvested grain seed weights were reduced as much as 14% by either herbicide applied at PI and boot. Germination of harvested grain was not affected by any treatment. At the rates evaluated in this research, glufosinate-induced injury to rice can be just as detrimental as glyphosate in reducing yield.

Research was conducted in 2009 and 2010 to evaluate influence of imazosulfuron rate and application timing on weed control in drill-seeded rice at Stuttgart, AR, and to evaluate imazosulfuron-containing herbicide programs in drill-seeded rice at Keiser and Stuttgart, AR. Weed species evaluated included barnyardgrass, broadleaf signalgrass, hemp sesbania, and yellow nutsedge. Imazosulfuron applied at 224 and 336 g ai ha−1 during PRE, early POST (EPOST), or preflood (PREFLD) growth periods provided similar control of all weeds. Imazosulfuron applied EPOST or PREFLD controlled hemp sesbania and yellow nutsedge ≥ 93% both years at 5 and 7 wk after planting (WAP), except in 2009 when hemp sesbania control was ≤ 79% at 7 WAP. In 2010, because of inadequate rainfall, hemp sesbania and yellow nutsedge control with PRE-applied imazosulfuron was ≤29% at 5 and 7 WAP. Imazosulfuron plus clomazone PRE followed by (fb) quinclorac plus propanil EPOST and imazosulfuron plus quinclorac EPOST fb thiobencarb plus propanil PREFLD programs controlled hemp sesbania and barnyardgrass (in at least two site-years), and yellow nutsedge and broadleaf signalgrass (in at least one site-year) greater than or equal to clomazone plus quinclorac PRE fb propanil plus halosulfuron PRELD (standard program). No rice injury was observed with any herbicide program. Rice yield with all imazosulfuron-containing herbicide programs (6,630 to 8,130 kg ha−1) was similar to the standard herbicide program (7,240 kg ha−1). Imazosulfuron in mixture with clomazone, propanil, or quinclorac can be incorporated into herbicide programs of mid-South rice production for the control of broadleaf weeds and sedges.