The design of the repository for high-level nuclear waste (HLW) in France consists of a multiple-barrier system including steel canisters in a clay host rock. The system will undergo temperature variations in time and space, the heat source being the HLW within the canisters. The effect of a thermal gradient in space on the Fe-claystone interaction was investigated here by applying a thermal gradient (150–300°C and 80–150°C) to a mix of claystone, Fe, and an aqueous chloride solution over periods of 3 and 6 months. Following the reaction, the starting clay minerals (mostly illite and mixed-layer illite-smectite) evolved toward chlorite, Fe-serpentine, Fe-saponite, mixed-layer chlorite-smectite, or mixed-layer serpentine-smectite as a function of temperature. Iron corrosion made the medium basic and reductive. Magnesium enrichment of clay minerals was observed in the hottest part of the experiment due to Mg migration under the thermal gradient. Reaction progress was enhanced at the lowest temperatures, compared to batch experiments.

In order to obtain nanopatterned surfaces, natural allophane particles originating from Japanese soils were immobilized as single particles on Si wafer substrates.When derived from aqueous suspensions, only a few nanoparticles were deposited and detected on the surface due to the weak adsorption of allophanes on the substrate. The amount of immobilized allophane was increased significantly, however, by using an organic solvent in combination with a micelle-based technique to suspend the allophane particles. The micelles were formed from a tailored, aliphatic diblock copolymer that was dissolved in toluene and contained several allophane particles. A cleaned silica chip was used as a substrate on which a monolayer of micelles was immobilized equidistant from each other by dip coating. To remove the polymer from the substrate and to produce free, single allophane nanoparticles, ultraviolet (UV) irradiation was used. After UV treatment, single allophane particles formed ring-shaped deposition patterns with a high surface density. Transmission electron microscopy (TEM) was used to verify the presence of single allophane nanoparticles in the Japanese samples which came from natural sources. The single allophane particles as well as the allophane-containing di-block copolymer micelles, both immobilized on Si substrates and TEM sample grids, were imaged by atomic force microscopy and TEM. In this way, the diameters of the single allophane particles, as well as the distances between the immobilized micelles and the particles and their topography on the substrates, were determined.

Nitrate is linked to chronic human illness and to a variety of environmental problems, and continues to be a contaminant of concern in soils and natural waters. Improved methods for nitrate abatement, thus, are still needed. The purpose of this study was to assess the potential for redox-modified, iron-bearing clay minerals to act as nitrate decontamination agents in natural environments. The model clay mineral tested was ferruginous smectite (sample SWa-1) exchanged with either sodium (Na+) or polydiallyldimethylammonium chloride (poly-DADMAC). Structural iron (Fe) in SWa-1 was in either the oxidized or reduced state. Little nitrate uptake was observed in the Na+-SWa-1, which was attributed to coulombic repulsion between the basal surfaces of the smectite and the nitrate anion. The addition of the DADMAC to the SWa-1 reversed the electrostatic charge manifested at the smectite surface from negative to positive, as measured by the zeta (ζ) potential. The positively charged poly-DADMAC-SWa-1 yielded high nitrate uptake due to coulombic attraction in both the oxidized and reduced states of the Fe in the SWa-1. The presence of reduced structural Fe(II) in the positively charged poly-DADMAC-SWa-1 enabled a chemical reduction reaction with the nitrate to produce nitrite. The amounts of nitrite found in solution, however, failed to account for all of the Fe(II) oxidized, so other N reduction products may also have formed or perhaps nitrite was also present in the adsorbed phase. The effects of other complexities, such as polymer configuration at the surface, also need further investigation. The results do clearly establish abiotic nitrate reduction to nitrite and possibly other reduction products. The combination of bacterial activity in soils and sediments, which is known to reduce structural Fe in smectites, and the abundance of organic cations in soil organic matter creates an environment where reversed-charge smectite could exist in nature. This represents a potentially effective system for mitigating harmful effects of nitrate in soils, sediments, groundwater, and surface water.

Kaolin ores are usually contaminated by some Fe-bearing minerals, the strong colors of which degrade the quality of the final product. A spectroscopic technique is sought to quantify the content of hematite and goethite, the main contaminant minerals in the kaolin from Capim River in Brazil, was the focus of this study. The total Fe content obtained through X-ray fluorescence showed a poor correlation with the brightness of kaolin, due to the inability to differentiate between the Fe contained in the (oxyhydr)oxides and the Fe present in the crystalline structure of kaolinite, especially when the Fe-bearing minerals occur in small quantities. Here, a new generic technique to quantify Fe (oxyhydr)oxides in kaolin, based on the Kubelka-Munk theory, is presented. A new interpretation of the theory was made that enables its use without the need to measure thin layers of material. The results with synthetic goethite and hematite were very positive (R2pred ≈ 0.99) and experiments with contaminants from the mine are already underway.

Mineralization of microbial biomass is a common phenomenon in geothermal habitats, but knowledge of the structure of the minerals formed in these environments is limited. A combination of spectroscopic, microscopic, and stable isotopic methods, as well as the chemical analysis of spring water, were employed in the present study to characterize calcium carbonate minerals deposited in filamentous cyanobacterial mats in different locations of La Duke hot spring, a circumneutral thermal feature near the north entrance of Yellowstone National Park, Montana, USA. Calcite was the primary crystalline mineral phase associated with biofilm-containing deposits closest to the source of the spring and the suspended microbial biomass in a pool further from the source. The carbonate minerals at all sites occurred as aggregated granules, ~2 μm in diameter, in close association with the microbial biomass. Only in the deposits closest to the source were the granules organized as laminated structures interspersed with microbial biomass. The calcium carbonate grains contained two distinct regions: a dense monolithic calcite core and a porous dendritic periphery containing organic matter (OM). Electron energy loss spectroscopy (EELS) indicated that the voids were infilled with OM and carbonates. The EELS technique was employed to distinguish the source of carbon in the organic matter and carbonate mixture. The studies of carbon isotope compositions of the calcium carbonates and the saturation indices for calcite in the spring waters suggest that processes (abiotic vs. biotic) controlling the carbonate formation may vary among the sampling sites.

K-Ar measurements were used in this study of upland Savannah River Site soils to distinguish between sorbed K and the K remaining in remnants of primary minerals. Study of sorbed K contributes to understanding further the interaction of alkali metals (Cs in particular) with the soils. Primary mineral K and the associated radiogenic Ar were studied to characterize soil mica with respect to its provenance and its relationship to hydroxy-interlayered vermiculite. K-Ar age values of Na-saturated clay fractions from five samples of these soils range in age from 270 to 370 Ma. After a moderate acid treatment (6% HNO3 v/v, ~1 mol dm-3, 3 h, 80°C) of the clay fractions, K-Ar age values (270-325 Ma) were little changed on the whole, but they were more closely grouped near 300 Ma. Earlier work had shown that most of the K in these soils is found in material resistant to moderate acid extraction. The K-Ar age values show that this acid-resistant material is much older than any pedogenic minerals could be, even much older than the sedimentary parent rocks from which the soils were derived. These observations support earlier inferences by others that the K in these well leached soils is largely in remnants of primary muscovite from the parent sediments. Age values near 300 Ma suggest that the muscovite is largely from proximal Piedmont terranes of the Appalachian orogen, where the K-Ar relationship in most micas was set by Alleghanian tectonic processes late in the Paleozoic Era. The structural location of the K within mica, shown by the retention of the associated radiogenic Ar, is in contrast to the sorption-dominated behavior of the Cs and most of the Rb in these soils during pedogenesis. Stronger acid treatment (~6 mol dm-3 HNO3, 3 h, 100°C) extracted substantial fractions of both the K and the radiogenic Ar from bulk-soil portions, indicating destruction of some of the primary mica. K-Ar age values for the sand-rich bulk soils were not useful for this study because the sand contains excess radiogenic Ar, probably in sand-sized vein quartz.

X-ray diffraction patterns of oriented mounts of clay minerals are often used in clay mineralogy for qualitative and quantitative purposes. Fequently occurring stacking defects, in particular, can be characterized by this technique. Modeling of these diffraction profiles has become an important tool in obtaining structural information about the nature of stacking order. Manual matching of calculated and observed patterns is time consuming and user dependent. Automatic refinement procedures are, therefore, desirable. An improved approach for the treatment of disordered layer structures within a Rietveld refinement is presented here. The recursive calculation of structure factors, similar to that of the simulation program DIFFaX, was introduced in the Rietveld code BGMN. Complete implementation is formulated within the interpreter language of the Rietveld code and is transparent as well as flexible. Such a method has opened the application of Rietveld refinement to patterns of oriented mounts where only basal reflections of stacking disordered structures were recorded. The DIFFaX code was used to simulate basal reflections of illite-smectite mixed layers (I-S) with different ratios of illitic and smectitic layers and with different degrees of long-range ordering (Reichweite). Rietveld refinements with these simulated patterns were used to evaluate the application of this new approach. Several I-S with different degrees of ordering were also chosen as tests for the refinement of basal reflections. The samples were prepared as standard airdried and ethylene glycol-solvated, oriented specimens. Realistic structural parameters were obtained for the composition and ordering of the I-S.

X-ray diffraction (XRD) of powdered materials is one of the most common methods used for structural characterization as well as for the quantification of mineral contents in mixtures. The application of the Rietveld method for that purpose requires structure models for each phase. The recursive calculation of structure factors was applied here to the Rietveld refinement of XRD powder patterns of illite-smectite (I-S) minerals. This approach allowed implementation of stacking disorder in structural models. Models for disordered stacking of cis-vacant and trans-vacant dioctahedral 2:1 layers as well as rotational disorder were combined with models for mixed layering of illitic and smectitic layers.

The DIFFaX code was used to simulate non-basal (hk) reflections of illites with different degrees of disorder. Rietveld refinements of these simulated patterns were used to evaluate the application of this new approach. A model describing rotational disorder (n·120° and n·60° rotations) and mixed layering of cis-vacant and trans-vacant dioctahedral layers was tested. Different starting parameters led to identical results within the ranges of standard deviations and confirmed the stability of the automatic refinement procedure. The influence on the refinement result of an incorrect choice of fixed parameters was demonstrated.

The hk model was combined with models describing the basal reflections of disordered I-S and tested on measured data. A glauconitic mineral (Urkut, Hungary), an ordered I-S (ISCz-1, a special clay in the Source Clays Repository of The Clay Minerals Society), and a dioctahedral I-S (F4, Füzérradvány, Hungary) were used as test substances. Parameters describing the mixed layering of illitic and smectitic layers were compared with the results from refinements of oriented mounts and showed good agreement. A pattern of a physical mixture of an I-S mineral and a turbostratically disordered smectite was analyzed in order to test the new approach for application in quantitative phase analysis. The quantitative Rietveld phase analysis results were found to be satisfactory.