The National Institute of Standards and Technology (NIST) certifies a suite of Standard Reference Materials (SRMs) to be used to evaluate specific aspects of the instrument performance of both X-ray and neutron powder diffractometers. This report describes SRM 640f, the seventh generation of this powder diffraction SRM, which is designed to be used primarily for calibrating powder diffractometers with respect to line position; it also can be used for the determination of the instrument profile function. It is certified with respect to the lattice parameter and consists of approximately 7.5 g of silicon powder prepared to minimize line broadening. A NIST-built diffractometer, incorporating many advanced design features, was used to certify the lattice parameter of the Si powder. Both statistical and systematic uncertainties have been assigned to yield a certified value for the lattice parameter at 22.5 °C of a = 0.5431144 ± 0.000008 nm.

The National Institute of Standards and Technology (NIST) certifies a suite of Standard Reference Materials (SRMs) to evaluate specific aspects of instrument performance of both X-ray and neutron powder diffractometers. This report describes SRM 660c, the fourth generation of this powder diffraction SRM, which is used primarily for calibrating powder diffractometers with respect to line position and line shape for the determination of the instrument profile function (IPF). It is certified with respect to lattice parameter and consists of approximately 6 g of lanthanum hexaboride (LaB6) powder. So that this SRM would be applicable for the neutron diffraction community, the powder was prepared from an isotopically enriched 11B precursor material. The microstructure of the LaB6 powder was engineered specifically to yield a crystallite size above that where size broadening is typically observed and to minimize the crystallographic defects that lead to strain broadening. A NIST-built diffractometer, incorporating many advanced design features, was used to certify the lattice parameter of the LaB6 powder. Both Type A, statistical, and Type B, systematic, uncertainties have been assigned to yield a certified value for the lattice parameter at 22.5 °C of a = 0.415 682 6 ± 0.000 008 nm (95% confidence).

The National Institute of Standards and Technology (NIST) certifies a suite of Standard Reference Materials (SRMs) to address specific aspects of the performance of X-ray powder diffraction instruments. This report describes SRM 1879b, the third generation of this powder diffraction SRM. SRM 1879b is intended for use in the preparation of calibration standards for the quantitative analyses of cristobalite by X-ray powder diffraction in accordance with National Institute for Occupational Safety and Health (NIOSH) Analytical Method 7500, or equivalent. A unit of SRM 1879b consists of approximately 5 g of cristobalite powder bottled in an argon atmosphere. It is certified with respect to crystalline phase purity, or amorphous phase content, and lattice parameter. Neutron powder diffraction, both time-of-flight and constant wavelength, was used to certify the phase purity using SRM 676a as an internal standard. A NIST-built diffractometer, incorporating many advanced design features was used for certification measurements for lattice parameters.

Three spinel materials were prepared and characterized by in situ powder X-ray diffraction (PXRD) techniques to track their phase changes that occurred in the typical batch synthesis process from a sol–gel mixture to the final crystalline spinel oxide. The materials were also characterized by thermal gravimetric analysis, whereby the materials decomposition mechanisms that were observed as the precursor, was gradually heated to the final oxide. The results showed that all the materials achieved their total weight loss at about 400 °C. The in situ PXRD analysis showed the progression of the phase transitions where certain of the materials changed from a crystalline precursor to an amorphous intermediate phase and finally to the spinel cathode oxide (Li1.03Mg0.2Mn1.77O4). For other materials, the precursor would start as an amorphous phase and upon heating, convert into an impure intermediate phase (Mn2O3) before forming the final spinel oxide (Li1.03Mn1.97O4). On the other hand, the LiAl0.4Mn1.6O4 would start with an amorphous precursor, with no intermediate phases and immediately formed the final spinel oxide phase. The in situ PXRD study also showed the increases in the materials respective lattice parameters of the crystalline unit cells upon heating and the significant increases in their crystallite sizes when heated above 600 °C.

The National Institute of Standards and Technology (NIST) certifies a suite of Standard Reference Materials (SRMs) to address specific aspects of the performance of X-ray powder diffraction instruments. This report describes SRM 1878b, the third generation of this powder diffraction SRM. SRM 1878b is intended for use in the preparation of calibration standards for the quantitative analyses of α-quartz by X-ray powder diffraction in accordance to National Institute for Occupational Safety and Health Analytical Method 7500, or equivalent. A unit of SRM 1878b consists of approximately 5 g of α-quartz powder bottled in an argon atmosphere. It is certified with respect to crystalline phase purity, or amorphous phase content, and lattice parameter. Neutron powder diffraction, both time of flight and constant wavelength, was used to certify the phase purity using SRM 676a as an internal standard. A NIST-built diffractometer, incorporating many advanced design features was used for certification measurements for lattice parameters.

The National Institute of Standards and Technology (NIST) certifies a suite of Standard Reference Materials (SRMs) to address specific aspects of the performance of X-ray powder diffraction instruments. This report describes SRM 1976b, the third generation of this powder diffraction SRM. SRM 1976b consists of a sintered alumina disc, approximately 25.6 mm in diameter by 2.2 mm in thickness, intended for use in the calibration of X-ray powder diffraction equipment with respect to line position and intensity as a function of 2θ-angle. The sintered form of the SRM eliminates the effect of sample loading procedures on intensity measurements. Certified data include the lattice parameters and relative peak intensity values from 13 lines in the 2θ region between 20° and 145° using CuKα radiation. A NIST-built diffractometer, incorporating many advanced and unique design features was used to make the certification measurements.

The National Institute of Standards and Technology (NIST) certifies a variety of standard reference materials (SRM) to address specific aspects of instrument performance for divergent beam diffractometers. This paper describes SRM 640d, the fifth generation of this powder diffraction SRM, which is certified with respect to the lattice parameter. It consists of approximately 7.5 g silicon powder specially prepared to produce strain-free particles in a size range between 1 and 10 μm to eliminate size-broadening effects. It is typically used for calibrating powder diffractometers for the line position and line shape. A NIST built diffractometer, incorporating many advanced design features, was used to certify the lattice parameter of the silicon powder measured at 22.5 °C. Both type A, statistical, and type B, systematic, errors have been assigned to yield a certified value for the lattice parameter of a=0.543 159±0.000 020 nm.