The effect of freezing and thawing on the rheological behavior of illite suspensions was studied by examining viscosity and plasticity. Stability of suspensions was characterized by a hysteresis loop of thixotropy. Thermal gravimetric and differential scanning calorimetry analysis were also used. After initial freezing and thawing, the flow curves of the suspensions show an increased viscosity, an “irregular up line”, and a greater hysteresis loop of thixotropy. The ratios of mean viscosity of previously frozen (F) and control (O) samples (ηF/ηO) for non-expandable 2:1 phyllosilicates ranges from 1.3 to 2.1. Addition of monovalent (0.1% Na2SiO3) and divalent cations (0.3% CaCl2 or BaCl2) increase and decrease the shear-stress difference between F and O samples, respectively. Prior freezing of clay samples results in an increase of plasticity by ∼20–30%. The thermal analysis data of F samples show an increase in weight loss, and a decrease in enthalpy of dehydration. The changes of physico-chemical properties from cycles of freezing and thawing are long lasting. The freezing memory effect of illite-type clays is expected to play an important role in ceramic processing, i.e., casting processes, plastic formation, and sintering.

Clays are extremely variable materials with different mineral compositions, and they are the main ingredients in ceramics applications. Their properties play specific roles in influencing the technological properties and performance of ceramics products. Evaluating the various properties can help to determine the best way to utilize clay materials, such as the locally available Bombawuha (BC) and Denkaka (DC) clays mined from Ethiopia's Bombawuha and Denkaka areas, respectively. The objective of this study was to examine these materials for the purpose of using them to produce quality electrical porcelain insulators. The clay samples were characterized for their chemical composition, mineralogy, thermal properties, plasticity, and particle-size distribution, using atomic absorption spectrometry (AAS), X-ray diffractometry (XRD), differential thermal analysis coupled with thermogravimetric analysis (DTA-TGA), the Atterberg plasticity test, and sieve hydrometer analysis. Based on the characteristics, suitable clay materials were selected and mixed with feldspar and quartz to formulate various porcelain body compositions which were fired at three different temperatures (1200, 1250, and 1300°C) and dwell times (1.5, 2.0, and 2.5 h). The mineralogy, water adsorption, apparent porosity, bulk density, dielectric strength, flexural strength, and microstructure of the fired bodies were measured. The results revealed that, compared to DC, BC contains kaolinite as the major mineral with appreciable amounts of silica (46.72 wt.%), alumina (35.32 wt.%), and fluxing oxides but smaller amounts of CaO. BC contains greater clay fractions (20.58 wt.%); and has a middle-range plasticity index (PI = 11.2 wt.%), thus making BC suitable for producing porcelain insulators. A test-body composition of 40 wt.% BC, 40 wt.% feldspar, and 20 wt.% quartz, fired at 1250°C for 2 h, exhibited water adsorption of 0.17 wt.%, apparent porosity of 0.42 wt.%, bulk density of 2.45 g/cm3, a dielectric strength of 8.22 kV/mm, and flexural strength of 43.63 MPa and, thus, satisfied the required properties for quality porcelain insulators.

Cowvine (Ipomoea lonchophylla J.M. Black) is a native and widely spread summer broadleaf weed in Australia. It contains glycoresins, which are toxic to livestock. However, limited information is available on seed germination ecology and growth phenology of this species. A series of experiments were conducted to determine the response of I. lonchophylla to different environmental conditions. Results showed that the primary dormancy exhibited by I. lonchophylla is due to the physical impediment of the hard seed coat. The seed germination percentage was the highest at the constant temperature of 27 C and alternating temperatures of 35/25 C. Germination of I. lonchophylla was not stimulated by light, suggesting that this species is non-photoblastic. Ipomoea lonchophylla germination was intolerant of a medium to high level of salt stress, and germination was completely inhibited at 250 mM NaCl. The emergence of I. lonchophylla was not restricted by seeding depth up to 8 cm, but only 5% emergence was recorded when seeds were planted at a 16-cm depth. The germination percentage was also drastically reduced by 90% to 100% after exposure to either 3 mo in silage, 48-h digestion in steers, or silage plus digestion treatments. The growth and reproductive phenology of I. lonchophylla was affected by emergence time. Plants that emerged in late spring (November 15) were able to produce more berries per plant than those that emerged in midsummer (January 15) in southern New South Wales. Information gained in our study concerning high soil salinity, ensiling, and digestion will help to develop more sustainable and effective integrated weed management strategies for controlling and reducing the spread of this weed.

Fast drying (~60 min) is useful for optimizing production processes by increasing productivity and reducing costs and environmental impacts, especially in red ceramic industries in Brazil. However, suitable clays are necessary and, currently, studies focused on the plastic behaviour of clays with compositions suitable for extrusion, especially for fast drying, are scarce. Therefore, in this study, three different clays from the same mineral deposit were studied for producing clay-based structural products via fast drying. The clays were characterized according to their chemical, mineralogical and thermal properties, particle size, cation-exchange capacity, specific surface area and open pore volume distribution. Ten formulations were developed using a simplex-centroid mixture design of experiments and their plasticity index (PI) values were determined. The response surfaces of the formulations were evaluated according to their PI, while the formation characteristics were determined according to their extrusion workability factor values. Formulations F5 (50.0 wt.% yellow clay and 50.0 wt.% green clay) and F8 (66.6 wt.% yellow clay, 16.7 wt.% grey clay and 16.7 wt.% green clay; PI = 15.5–16.6%) displayed optimal extrusion properties, followed by formulations F7 (33.3 wt.% yellow clay, 33.3 wt.% grey clay and 33.3 wt.% green clay) and F10 (16.7 wt.% yellow clay, 16.7 wt.% grey clay and 66.6 wt.% green clay; PI = 13.8–14.2%), which are within acceptable extrusion index values. Thus, the chosen formulations have significant potential for use in the manufacture of fast-drying red ceramics.

Phenotypic plasticity is a heritable trait that provides sessile organisms a strategy to rapidly mitigate negative effects of environmental change. Yet, we have little understanding of the mode of inheritance and genetic architecture of plasticity in different focal traits relevant to agricultural applications. This study builds on our recent discovery of genes controlling temperature-mediated flower size plasticity in Arabidopsis thaliana and focuses on dissecting the mode of inheritance and combining ability of plasticity in the context of plant breeding. We created a full diallel cross using 12 A. thaliana accessions displaying different temperature-mediated flower size plasticities, scored as the fold change between two temperatures. Griffing’s analysis of variance in flower size plasticity indicated that non-additive genetic action shapes this trait and pointed at challenges and opportunities when breeding for reduced plasticity. Our findings provide an outlook of flower size plasticity that is important for developing resilient crops for future climates.

The aim of this study was to evaluate the effect of genotype–environment interaction (GEI) on the yearling weight of Simmental cattle raised in Brazil, including the sex dimorphism in reaction norm models. The environmental gradient (EG) was formed using the average weight at 365 days of the contemporary groups. Two approaches were adopted in this study to evaluate reaction norms for weight at 365 days: a single-trait model and a multitrait model in which the data for males and females were separated and considered different traits for the analysis of sexual dimorphism. The genetic parameters were estimated using the Bayesian inference and Gibbs sampling. Analysis of the trend of the heritability estimates obtained with the single-trait model along the EG revealed a value of about 0.33 (EG: −21) in the worst environments, which decreased in the intermediate environments and reached a value of 0.24 in EG: −8, with a subsequent increase of the estimates up to 0.51 in EG: +23. Using the multitrait model, similar trends were observed for the heritability estimates, which ranged from 0.25 to 0.54 for males and from 0.23 to 0.50 for females. The results show that the weight of Simmental cattle raised in the tropics is influenced by GEI and greater genetic progress could be obtained by selecting better environments. However, no significant differences in the response to most environmental changes were observed between sexes and there is only evidence of genetic heteroscedasticity in environments with lower production levels.

Engaging Catherine Malabou's philosophical work on biological plasticity, this article combines microbiological and geopolitical analysis of the deadliest manifestations of childhood malnutrition. At the scale of microbiology, childhood malnutrition is a devastating condition and a mystery to which it seems microbiomes – the ecosystems of microbes in the gut – hold a key. At the scale of geopolitics, childhood malnutrition is a calamity generated by racial capitalism, poverty, and underdevelopment. What should we do with the plasticity that makes us? Malabou asks. Engaging philosophically with the plastic materiality of microbiomes in childhood malnutrition, the article focuses on destructive plasticity as an ontological alternative to what science on malnutrition pursues as a problem of causality. This leads to an argument that medicine, as well as humanitarian, security, and development interventions, must reckon with the destructive plasticity of what is in essence a political disease of annihilation. The article ends by speculating on resistance via the biological act of nurturing.

For species without parental care, such as sea turtles, nest site selection is particularly important for embryo development, hatchling survival and, ultimately, reproductive success. We conducted an 8-year (2012–2019) capture–mark–recapture study of the re-nesting behaviour of loggerhead turtles Caretta caretta to identify both inter- and intra-beach patterns of nest site selection. Our study site, Maio Island in the archipelago of Cabo Verde, hosts one of the largest loggerhead turtle nesting colonies globally. Of 1,060 females analysed, 77% laid repeated clutches within 15 km of their previous nesting sites both between and within nesting seasons. This site fidelity was particularly high (64–71%) for turtles nesting on the east coast of Maio Island. In two areas of the island (north-west and south-east) individual nesting zone consistency was extremely low (10–25%). In all cases extra-zone re-nesting events mainly occurred on the east coast. We also found that females avoided re-nesting near the shoreline, which is particularly relevant in the context of rising sea levels. Overall, loggerhead turtles nesting in Maio Island are philopatric but are using a bet-edging strategy to distribute nests amongst several beaches, choosing the safest area within each beach to maximize their reproductive success. This study highlights the priority sites for protection on Maio Island and could help to optimize capture–mark–recapture programmes. The data reveal the potential for adaptive responses to projected sea level rises.