1. The series

is the simplest and most familiar power series whose radius of convergence is zero. It is natural to regard it as a development of the function G(z) defined, when

by

For

say;and

or

according as x is positive or negative. Thus the series (1·1) is an asymptotic series for G(z) in the sense of Poincaré.

Nous ne considérerons, en général, que les sous-ensembles de l'intervalle [0, 1] et nous désignerons par et respectivement l'ensemble des nombres rationnels et l'ensemble des nombres irrationnels de cet intervalle.

Nous allons employer pour les fractions continues la notation

Étant donnée une suite de nombres naturels {zn}, nous dirons que le nombre correspond à la suite {zn} et vice versa, et nous écrironns z = v({zn}). Pareillement, nous dirons qu'un ensemble correspond à une famille Φ de suites de nombres naturels si l'on a E = v(Φ).

The notion of fractional dimensions is one which is now well known. The object of the present paper is the investigation of the dimensional numbers of sets of points which, when expressed as continued fractions, obey some simple restriction as to their partial quotients. The sets considered are naturally of linear measure zero. Those properties of the partial quotients which hold for almost all continued fractions make up the subject called by Khintchine ‘the measure theory of continued fractions’.

Let f(x, y) be a binary cubic form with real coefficients and determinant D ≠ 0. In a recent paper, Mordell has proved that there exist integral values of x, y, not both zero, for which

These inequalities are best possible, since they cannot be satisfied with the sign of strict inequality when f(x, y) is equivalent to

for the case D < 0, or to

for the case D > 0.

Suppose that n runs through all integral values, that (øn) is a system of normal orthogonal functions for the interval (−∞, ∞), and that ψn is the Fourier transform of øn. Then, by Parseval's theorem for Fourier transforms,

and (ψn) is also a normal orthogonal system.

In this paper we are concerned with curves (C) of the following types:

where k1, k2, …, kh−1, kh = 0 (h ≤ n) are the curvatures of (C) relative to the space Vn in which (C) lie. Hayden proved that a curve in a Vn is an (A)2m, h = 2m + 1, if and only if it admits an auto-parallel vector along it which lies in the osculating space of the curve and makes constant angles with the tangent and the principal normals. Independently, Sypták∥ stated without proof that a curve in an Rn is a (B)n if and only if it admits a certain number of fixed R2's having the same angle properties; he also gave to such a curve a set of canonical equations from which many interesting properties follow as immediate consequences.

1. Any number x between 0 and 1 may be expressed uniquely in the form

where xr is a non-negative integer less than r (r = 2,3,…). We consider the set E of numbers x for which

We establish an inequality connecting the dimensional number of the set E with certain constants of the series

in particular we show that, when ξτ = rθ, the dimensional number of E is θ. We are concerned with the measure of Hausdorff.

The object of this note is to obtain necessary and sufficient conditions for the existence of

on the assumption that ø is integrable in any finite positive interval not including zero (0 < α ≤ x ≤ β < ∞). On reference to the literature on the topic, I find no exhaustive analysis of this problem anywhere.

1. Introduction and summary. A chain of N links is allowed to assume a random configuration in space. The extent of the chain in any direction is defined as the shortest distance between a pair of planes perpendicular to that direction, such that the chain is contained entirely between them. In the present paper the probability distribution of the extent is discussed, starting with a chain in one dimension for which formulae are derived for the probability and mean extent for all values of N. The limiting forms for large N are then considered. The results are extended to the case of a chain in three dimensions, and it is shown that the extents in two directions at right angles tend to be independently distributed when N is large. It is assumed that the links are infinitely thin, so that a point in space may be occupied by the chain any number of times.

Let G(θ) denote the limit points of the fractional parts of θn (n = 1, 2, 3, …), and T the set of numbers θ for which G(θ) contains an infinity of points. In an earlier note it was proved that if θ is a rational fraction greater than unity then θ belongs to T. The results of this note concern the limit points of the powers of algebraic irrationals.

The reflexion of a train of simple harmonic waves by a convex paraboloid of revolution, and by a parabolic cylinder, has been discussed by Lamb. In the present paper these results are extended to the reflexion of plane waves of arbitrary form. It is found that on the introduction of suitable variables the equation of sound propagation transforms (in each case) into a simpler equation whose general integral can be obtained by quadratures. Two unknown functions are introduced during the integration, which have to be determined from the boundary conditions. This involves in both cases the solution of a Volterra integral equation, which is effected numerically by calculation of the first terms in the series development of the resolving kernel. An interesting feature of the solutions obtained is that when a suitable time scale is introduced (for a sharp-fronted pulse the time must be counted from the onset of the wave), the reflected wave experienced is the same at all points on any paraboloid (or parabolic cylinder) confocal with the reflector.

A linear vector m-space Rm defined along a curve (C) in a Vn and lying in the complete osculating space of (C) will be called a characteristic Rm of (C) if it is auto-parallel along the curve and makes constant angles with its tangent and the principal normals. Curves admitting a characteristic R1 have been studied by Hayden under the name of generalized helices and generalized by me§. In this paper we give a complete determination of the curves with a characteristic R2. Curves whose curvatures are proportional to a set of constants, which have been considered by Syptak for the particular case when Vn is an Rn, form one of the classes of curves of this type. As a consequence, the existence of the curves admitting a characteristic Rm (m > 2) is partly established, but the problem has not been completely solved. At the end we prove two theorems in connexion with two particular types of characteristic Rm's.

In a previous paper a general solution was given for problems of stress distributions in a plate containing circular holes of varying sizes arranged in any manner. This work was a generalization of special methods used by various writers for particular arrangements of holes. The types of stress distributions were, however, confined to those which produce zero force resultants on each hole and the solutions were therefore independent of the elastic constants. Bickley has studied distributions of stress round one circular hole in an infinite plate when the force resultants on the hole are no longer zero, and a few other problems of this type have been dealt with by other writers.

1. Introduction. It is a classical result in hydrodynamics that a solid moving in an infinite liquid under no forces is capable of steady translational motion in any one of three mutually perpendicular directions. In the general case such a motion is only possible in three directions, though of course particular solids are capable of steady motion without rotation in an infinity of directions.

The theory of holes in liquids, suggested in a previous paper, is developed by means of classical statistical mechanics, and it is shown that the principal thermodynamic properties of the liquid state can be derived in this way and that they are in numerical agreement with the experiments.

The problem considered in this paper is that of finding the least possible h = h(x) such that a given arithmetic function a(n) should keep its average order in the interval x, x + h, i.e. that we have

and

as x → ∞.

We consider the motion of a particle in a plane field of force. We take rectangular cartesian coordinates (x, y) in the plane, and denote by V(x, y) the potential of the field, and by h the (constant) energy of the motion. If A and B, whose coordinates are (x0, y0) and (x1, y1), are any two points on an orbit, the orbit is characterized by the property that

taken along the orbit is stationary as compared with the integral taken along a neighbouring curve joining the same points. Here s denotes the length of the are measured from A to B. This is one form, sometimes called Jacobi's form, of the principle of least action. The value of the integral, taken along the orbit, and expressed in terms of the coordinates of the termini and the constant of energy,

is the action function for the field V.

A short survey of Born's theory of the thermodynamics and melting of crystals is given. It is shown that Lindemann's and Grüneisen's law for the normal melting temperature can be deduced from this theory, and that the dependence of the melting temperature on pressure, and of the compressibility and the elastic constants on pressure and temperature, as predicted by the theory, are in good agreement with experiment. Several connexions between breaking and melting, suggested by the fundamental ideas on melting and stability of crystals, are discussed and verified. Finally a relation between the heat of melting and the heat of sublimation is deduced and compared with experiment.

The theory of holes, developed in part I of this paper, leads to the existence of a metastable state of a liquid. It is identified with the superheated state, the main properties of which can be accounted for in this way. A theory of the supersaturation of gases in liquids is given on the same line.

Let M be a bounded and closed set of points in the complex z plane; d(M), a set-function which is of great importance in potential and function theory, may then be defined as follows. n points z1, z2, …, zn in M are so chosen that the product of the mutual distances

has the greatest possible value Then it can be proved that

exists. Thus the set-function d(M), named by Fekete the transfinite diameter of M, is defined.