The occurrence, chemical composition and structural characterisation of the new mineral kernowite, ideally Cu2Fe(AsO4)(OH)4⋅4H2O, the Fe3+-analogue of liroconite, Cu2Al(AsO4)(OH)4⋅4H2O, are described. Kernowite (IMA2020-053) occurs on specimens probably sourced from the Wheal Gorland mine, St Day, Cornwall, UK, in the cavities of a quartz-gossan rich in undifferentiated micro-crystalline grey sulfides and poorly crystalline arsenic phases including both pharmacosiderite and olivenite-group minerals. The average composition of kernowite determined from several holotype fragments by electron microprobe analysis is Cu1.88(Fe0.79Al0.09)Σ0.88(As1.12O4)(OH)4⋅3.65H2O. The structure of kernowite has been determined in monoclinic space group I2/a (a non-standard setting of C2/c) by single-crystal X-ray diffraction (SCXRD) to R1 = 0.025, wR2 = 0.051 and Goodness-of-fit = 1.112. Unit-cell parameters from SCXRD are a = 12.9243(4) Å, b = 7.5401(3) Å, c = 10.0271(3) Å, β = 91.267(3)°, V = 976.91(6) Å3 and Z = 4. The chemical formula of this crystal indicated by SCXRD from refined site-scattering is Cu2(Fe3+0.84(1)Al0.16)AsO4(OH)4⋅4H2O. The network of hydrogen bonding has been determined and is similar to that reported for liroconite from Wheal Gorland by Plumhoff et al. (2020).

Several text symbol lists for common rock-forming minerals have been published over the last 40 years, but no internationally agreed standard has yet been established. This contribution presents the first International Mineralogical Association (IMA) Commission on New Minerals, Nomenclature and Classification (CNMNC) approved collection of 5744 mineral name abbreviations by combining four methods of nomenclature based on the Kretz symbol approach. The collection incorporates 991 previously defined abbreviations for mineral groups and species and presents a further 4753 new symbols that cover all currently listed IMA minerals. Adopting IMA–CNMNC approved symbols is considered a necessary step in standardising abbreviations by employing a system compatible with that used for symbolising the chemical elements.

Calcification within breast cancer is a diagnostically significant radiological feature that generally consists of hydroxylapatite. Samples from 30 cases of breast carcinoma with calcification were investigated using optical microscopy, energy-dispersive X-ray analysis, transmission-electron microscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, synchrotron radiation X-ray diffraction and X-ray fluorescence. Under optical microscopy, the calcifications were found to consist of either irregular aggregates with widths > 200 μm or spherical aggregates similar to psammoma bodies with an average diameter of 30 μm. Transmission-electron microscopy showed that short columnar or dumbbell-shaped crystals with widths of 10–15 nm and lengths of 20–50 nm were the most common morphology; spherical aggregates (~1 μm in diameter) with amorphous coatings of fibrous nanocrystals were also observed. Results indicated that hydroxylapatite was the dominant mineral phase in the calcifications, and both CO32– and cation substitutions (Na, Mg, Zn, Fe, Sr, Cu and Mn) were present in the hydroxylapatite structure. Fourier-transform infrared spectra show peaks at 872 and 880 cm–1 indicating that CO32– substituted both the OH– (A type) and PO43– (B type) sites of hydroxylapatite, making it an A and B mixed type. The ratio of B- to A-type substitution was estimated in the range of 1.1–18.7 from the ratio of peak intensities (I872/I880), accompanied with CO32– contents from 1.1% to 14.5%. Trace arsenic, detected in situ by synchrotron radiation X-ray fluorescence was found to be distributed uniformly in the calcifications in the form of AsO43– substituting for PO43–. It is therefore proposed that identifying these trace elements in breast cancer calcifications may be promising for future clinical diagnostics.

Fluid-inclusion studies were conducted on amethyst quartz from three different geological environments: basalt cavities; hydrothermal veins; and granitic pegmatites of Eastern Brazil, to understand the conditions of amethyst crystallisation in each of these environments. In samples from basalt cavities, fluid inclusions are exclusively one-phase aqueous types suggesting a low-temperature formation environment. Crystals from the two other environments show that fluid inclusions can be either one-phase aqueous, two-phase aqueous, three-phase aqueous carbonic, or three-phase aqueous with the presence of precipitated solid halite. The carbonic composition of the system H2O–CO2–NaCl was confirmed by Raman spectroscopic analysis and suggests a metamorphic or magmatic fluid source. Fluid inclusions trapped in samples from hydrothermal veins reveal at least two different fluid generations based on homogenisation temperatures. The first generation has minimum trapping temperatures between 249°C and 391°C. The second generation of lower temperature fluids has minimum trapping temperatures varying from 82°C to 203°C. Fluid inclusions of this group record eutectic temperatures that indicate the presence of Ca and Fe cations in addition to Na. Fluid inclusions trapped in amethyst from a pegmatite body have moderate salinity values between 15 and 25 eq. wt.% NaCl, thus reflecting the elevated salt content in pegmatite-forming fluids. In this sample, the first fluid generation is represented by aqueous fluid inclusions with minimum trapping temperatures ranging from 268°C to 375°C. The estimated eutectic temperatures, generally below –50°C, indicate the presence of Ca cations in addition to Na. Minimum trapping temperatures correspond to temperatures of late-to-post-pegmatitic hydrothermal stages. The second generation records minimum trapping temperatures between 125°C and 247°C. Amethyst from both hydrothermal veins and pegmatite environments contain solid inclusions of hematite, an indication that the mineralising fluid was Fe rich and thus, possibly magmatic in origin.

Aldermanite from Tom's quarry in the Kapunda–Angaston area of the Mount Lofty Ranges, South Australia has been characterised by electron microprobe analyses and single-crystal structure analysis. The empirical formula is Na0.72K0.13Ca0.06Mg1.15Al2.92(PO4)2.05[(OH)2.92F2.96]Σ5.88⋅8.91H2O, based on 23 anions. Analysis of a specimen from the type locality, the nearby Klemm's quarry, Moculta, gave a similar formula, Na0.59K0.06Ca0.36Mg0.92Al3.16(PO4)1.97[(OH)4.08F2.70]Σ6.78⋅8.36H2O. Na and F were not analysed in the original description of the mineral. The ideal end-member formula is [Mg(H2O)6][Na(H2O)2Al3(PO4)2(OH)6]⋅H2O, compared to the original formula of Mg5Al12(PO4)8(OH)22⋅nH2O with n ≈ 32. Aldermanite is monoclinic, P21/c with a = 13.524(3), b = 9.958(2), c = 7.013(1) Å and β = 97.40(3)°. The crystal structure of aldermanite is built from sawtooth layers of cis- and trans-corner-connected, Al-centred octahedra, decorated with corner-connected PO4 tetrahedra to give (100) layers of composition Al3(PO4)2(OH,F)6. Interlayer Mg(H2O)6 octahedra and H2O molecules hold the layers together through H bonding. The corner-connected octahedra form 6-membered rings that are centred by 8-coordinated Na and have a topology identical to a 3-octahedra-wide {110} slice of the pyrochlore structure. This pyrochlore element contains intersecting kagomé nets of Al atoms, parallel to (111) and (11$\bar{1}$) of cubic pyrochlore. Minerals of the walentaite group, as well as zirconolite-3O polytypes have the same type of intersecting kagomé nets of small cations.

The new mineral bianchiniite, Ba2(Ti4+V3+)(As2O5)2OF, has been discovered in the Monte Arsiccio mine, Apuan Alps, Tuscany, Italy. It occurs as brown {001} tabular crystals, up to 1 mm across, with a vitreous lustre. It is brittle, with a perfect {001} cleavage. Streak is brownish. In reflected light, bianchiniite is grey, with orange–yellow internal reflections. It is weakly bireflectant, with a very weak anisotropy in shades of grey. Minimum and maximum reflectance data for COM wavelengths [Rmin/Rmax (%), (λ, nm)] are: 5.0/5.8 (470), 5.7/6.5 (546), 5.7/7.0 (589) and 5.2/6.3 (650). Electron microprobe analyses gave (wt.% – average of 10 spot analyses): TiO2 10.34, V2O3 3.77, Fe2O3 3.76, As2O3 44.36, Sb2O3 0.22, SrO 0.45, BaO 34.79, PbO 0.28, F 1.77, sum 99.74, –O = F –0.75, total 98.99. On the basis of 12 anions per formula unit, the empirical formula of bianchiniite is (Ba2.00Sr0.04Pb0.02)Σ2.06(Ti4+1.14V3+0.44Fe3+0.42)Σ2.00[(As3.96Sb0.02)Σ3.98O10](O1.18F0.82)Σ2.00. Bianchiniite is tetragonal, space group I4/mcm, with unit-cell parameters a = 8.7266(4), c = 15.6777(7) Å, V = 1193.91(12) Å3 and Z = 8. Its crystal structure was refined from single-crystal X-ray diffraction data to R1 = 0.0134 on the basis of 555 unique reflections with Fo > 4σ(Fo) and 34 refined parameters. The crystal structure shows columns of corner-sharing [Ti/(V,Fe)]-centred octahedra running along c, connected along a and b through (As2O5) dimers. A {001} layer of Ba-centred [10+2]-coordinated polyhedra is intercalated between (As2O5) dimers. Bianchiniite has structural relations with fresnoite- and melilite-group minerals. The name honours the two mineral collectors Andrea Bianchini (b. 1959) and Mario Bianchini (b. 1962) for their contribution to the knowledge of the mineralogy of pyrite ± baryte ± iron-oxide ore deposits from the Apuan Alps.

Zoning texture in sphalerite has been described in many studies, although its genesis and ore formation process are poorly constrained. In this investigation, we compare the in situ trace element and isotopic composition of colour-zoned sphalerites from Nayongzhi, South China, to explain the zoning growth process. Petrographic observations identified two broad types of zoned sphalerite, core–rim (CR) and core–mantle–rim (CMR) textures. Each zoned sphalerite displays two or three colour zones, including brown core, light colour bands and/or pale-yellow zones. In situ laser ablation inductively coupled plasma mass spectrometry trace-element analyses show that the three colour zones display variable trace-element compositions. Brown cores exhibit distinctly high Mn, Fe, Co, Ge, Tl and Pb concentrations, whereas pale-yellow and light colour zones have elevated Ga, Cd, Sn, In and Sb concentrations. Copper, Sb, In and Sn show slight variations between pale-yellow and light zones, the latter having higher In and Sn, but lower Cu and Sb abundances. Given the low concentration range of Pb, Ge, Tl, Mn Sb, Cd, etc., the colour of sphalerite is attributed mainly to Fe compositional variation. The δ34S values of sphalerite from Nayongzhi range from +22.3 to +27.9‰, suggesting reduced sulfur was generated by thermochemical sulfate reduction of marine sulfate in ore-hosted strata. Single-crystal colour-zoned sphalerite exhibits intracrystalline δ34S variation (up to 4.3‰), which is attributed to the δ34S composition of H2S in the original fluid. The lack of correlation between trace elements and δ34S values indicates episodic ore solution influxes and mixes with the reduced sulfur-rich fluid derived from the aquifers of the ore-hosted strata, which play a key role in the formation of the zoned Nayongzhi sphalerite. In conclusion, in situ trace element and S isotope studies of zoned sphalerite crystals might provide insight into the ore-forming process of MVT deposits.

Thebaite-(NH4), (NH4,K)3Al(C2O4)(PO3OH)2(H2O), is a new mineral species (IMA2020-072) from the Rowley mine, Maricopa County, Arizona, USA. It occurs in an unusual bat-guano-related, post-mining assemblage of phases that include a variety of vanadates, phosphates, oxalates and chlorides, some containing NH4+. Other secondary minerals found in association with thebaite-(NH4) are antipinite, vanadinite and at least one other new mineral. Crystals of thebaite-(NH4) are colourless blades up to ~0.1 mm in length. The streak is white, lustre is vitreous, Mohs hardness is 1½–2, tenacity is brittle and fracture is splintery. There are two good cleavages in the [010] zone, probably {100} and {10$\bar{2}$}. The calculated density is 2.093 g⋅cm–3. Thebaite-(NH4) is optically biaxial (–) with α = 1.490(2), β = 1.534(2), γ = 1.570(2) (white light); 2V = 82.7(5)°; slight r > v dispersion; and orientation X = b, Y ^ c = 13° in obtuse β. Electron microprobe analysis gave the empirical formula [(NH4)2.12K0.69Na0.20]Σ3.01(Al0.84Fe3+0.11V3+0.04)Σ0.99(C2O4)[(P0.98Si0.02)O3OH]2(H2O), with the C, N and H contents constrained by the crystal structure. Raman spectroscopy confirmed the presence of NH4 and C2O4. Thebaite-(NH4) is monoclinic, P21/c, with a = 11.156(9), b = 6.234(6), c = 18.651(16) Å, β = 102.928(15)°, V = 1264.2(19) Å3 and Z = 4. The structural unit in the crystal structure of thebaite-(NH4) (R1 = 0.0612 for 863 Io > 2σI reflections) is a double-strand chain of corner-sharing AlO6 octahedra and PO3OH tetrahedra decorated by additional PO3OH tetrahedra and C2O4 groups. The decorated chains connect to one another through bonds to NH4+ and K+ and through hydrogen bonds.

A common attribute of two rare natural chromium-bearing oxides: mcconnellite, CuCrO2, discovered more than 40 years ago in Guyana, and a new mineral ellinaite, CaCr2O4, described from two localities (Brazil and Israel) recently, is that these minerals are poorly studied due to their rarity and small size. Mcconnellite and ellinaite in the present study were found in varicoloured marbles of the pyrometamorphic Hatrurim Complex in the Tulul Al Hammam area, Daba-Siwaqa, Jordan. Structural data obtained for ellinaite (Pnma, a = 9.0875(2), b = 2.9698(1), c = 10.6270(3) Å and V = 286.80(2) Å3), with an empirical formula (Сa1.00Sr0.01)Σ1.01(Cr3+1.79Al0.07Ca0.04Fe3+0.04 Ti4+0.03Mg0.03)Σ2.00O4, is similar to the structural data of synthetic analogue β-CaCr2O4 but differs significantly from the data obtained for ellinaite from Brazil and Israel despite the fact that all the natural phases have a similar composition. Single-crystal X-ray diffraction data for mcconnellite from Jordan (R$\bar{3}$m, a = b = 2.9756(1) and c = 17.124(1) Å) with composition (Cu0.98Ca0.03Sr0.01)Σ1.02(Cr3+0.90Al0.05 Fe3+0.03)Σ0.98O2, is the first determination of a natural Cu-delafossite-type structure. This paper also presents the results of a single-crystal Raman study for mcconnellite and ellinaite, which indicates that the spectral features of these minerals is dependent on crystal orientation.

The new högbomite-group mineral magnesiohögbomite-6N12S, ideally Mg5Al11TiO23(OH), was found in calcite “vein-dikes” at the DeWitts Corners occurrence, lots 10 and 11, concession 1, Bathurst Township, Ontario, Canada. It forms tabular and short-prismatic crystals up to 5 mm in size. The major forms are pinacoid {0001} and hexagonal pyramid {11${\bar 2}$1}, sometimes modified by hexagonal prism {11${\bar 2}$0}. The associated minerals are magnesiohögbomite-2N3S, spinel, corundum, diopside, magnesio-hastingsite, pargasite, clinochlore and calcite. Magnesiohögbomite-6N12S is dark brown to black with brown streak and vitreous lustre. It has no cleavage and its fracture is uneven. The Mohs hardness is 6½. Dcalc is 3.87 g/cm3. The infrared spectrum is reported. The composition (wt.%) is MgO 13.09, ZnO 0.46, FeO 11.91, Fe2O3 6.84, Al2O3 62.70, TiO2 4.44, H2O 0.99, total 100.43. The empirical formula calculated on the basis of 17 cations, excluding H+, is (Mg2.95Fe2+1.51Al0.49Zn0.05)Σ5(Al10.71Fe3+0.78Ti0.51)Σ12O23(OH). The simplified formula is (Mg,Fe)5(Al,Fe,Ti)12O23(OH). The mineral is trigonal, R${\bar 3}$m, a = 5.7194(2), c = 83.069(5) Å, V = 2353.3(2) Å3 and Z = 6. The strongest reflections of the powder X-ray diffraction pattern [d,Å(I)(hkl)] are: 2.921(26)(0.1.23), 2.863(49)(110), 2.687(29)(0.1.26), 2.547(31)(0.1.$\overline{28}$) and 2.434(100)(1.1.18). The crystal structure was solved and refined from single-crystal X-ray diffraction data to R1 = 0.022. It is composed of alternating spinel (S) and nolanite (N) modules in the sequence 3 × (NSSNSS). The sequence of cubic ‘c’ and hexagonal ‘h’ closed-packed oxygen layers is 3 × (cccccchcccch). It is the first polysome in the högbomite supergroup with such a sequence.

Myrmekites occurring in monzodiorite from the Meichuan pluton in the Dabie ultrahigh-pressure metamorphic belt were investigated. The petrographic evidence demonstrates a metasomatic origin for myrmekite formation at the scale of individual alkali feldspar grains, and that the myrmekitic quartz and plagioclase matrix are generated simultaneously replacing precursor feldspar. Energy-dispersive X-ray spectroscopy and electron microprobe analysis indicate a low anorthite content in the narrow rim of host plagioclase near the myrmekite–alkali-feldspar interface. The Ca2+, Na+ proportion of hydrothermal fluids replacing precursor alkali feldspar is 1:5.4, calculated from the anorthite content of the inner part of the host plagioclase and the neighbouring alkali feldspar. Electron back-scattered diffraction was used to identify the crystallographic orientation of the myrmekitic quartz, plagioclase matrix and the precursor alkali feldspar. The crystallographic orientation relationships (110)Kfs//(11$\bar{2}\bar{1}$)Qtz, (20$\bar{1}$)Kfs//(11$\bar{2}$1)Qtz and [11$\bar{2}3]$Qtz//[001]Kfs between myrmekitic quartz and adjacent alkali feldspar were obtained from statistical analysis. No clear crystallographic orientation relationship between quartz and plagioclase was found. The growth of myrmekitic quartz is constrained by the precursor alkali feldspar rather than the simultaneously crystallised plagioclase. This research is helpful for understanding the intergrowth mechanism during metasomatism.

We report on the crystal structures of three novel synthetic SrM-arsenates (M = Ni and Fe3+), isostructural or structurally related to the minerals from tsumcorite, carminite and brackebuschite groups. They were synthesised under mild hydrothermal conditions and further characterised using single-crystal X-ray diffraction (SXRD), scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) and Raman spectroscopy. SXRD and SEM-EDS yielded formulae: (I) SrNi2(AsO4)2⋅2H2O, (II) Sr1.4Fe3+1.6(AsO4)2(OH)1.6 and (III) SrFe3+(AsO4)(AsO3OH). All three structures are built up of slightly distorted MO6 octahedra and AsO4 tetrahedra that are linked by Sr2+ with different coordination geometries and hydrogen bonds. I represent a basic structure type typical for tsumcorite-group minerals (space group C2/m) while II has a new intermediate structure between carminite, PbFe3+2(AsO4)2(OH)2 and arsenbrackebuschite, Pb2Fe3+(AsO4)2(OH) (s.g. Pm). III is triclinic and adopts a new structure-type (s.g. P$\bar{1}$). The structure of I is built up of infinite linear edge-sharing NiO4(OH2)2 octahedral chains, extending along [010] and linked by AsO4 tetrahedra, SrO8 polyhedra and hydrogen bonds. The structure of II is characterised by the carminite-like FeO4(OH)2 octahedral chains and Edshammar-polyhedral chains, which involves SrO11 coordination polyhedra similar to that of PbO11 in arsenbrackebuschite. Both chains in II are aligned parallel to the b axis of the monoclinic unit cell and connected together by the arsenate AsO4 tetrahedra, SrO8 polyhedra and the hydrogen-bonding network. The compound III has a new type of crystal structure based on the unusual corrugated octahedral–tetrahedral-quadruple chains. These are made up of a central double-sided chain linked to two single-sided chains into a quadruple chain extended along the a axis. The chains in III are built up of FeO6 octahedra and AsO4 tetrahedra further linked to each other by shared vertices. The quadruple chains are interconnected by additional AsO4 tetrahedra forming a heteropolyhedral 3D open framework. Strontium atoms are situated in the two channels. The structural connections to related minerals and inorganic compounds are discussed.

A nomenclature scheme has been set up for the nordite supergroup of minerals, which have the general formula A2BXYZT6O17 and where A = Na; B = Na, Ca; X = Sr, Ca, Ba; Y = REE, Sr; Z = Zn, Fe, Mn, Mg and T = Si. The nordite supergroup includes nordite-(La), nordite-(Ce), ferronordite-(La), ferronordite-(Ce) and manganonordite-(Ce), as well as meieranite which is considered as an unassigned member of the nordite supergroup. In the known nordite-group minerals the Y site is occupied by rare earth elements (REE), while in meieranite the Y site is occupied by Sr. The dominant element on the tetrahedral Z site determines the prefix used in the mineral name. New rootnames must be given to species with a different dominant element on the A, B or X sites. Nordite supergroup minerals are orthorhombic, although nordite-group minerals and meieranite crystallise in the Pcca and P21nb space groups, respectively. The proposed nomenclature scheme for the nordite supergroup has been approved by the Commission on New Minerals, Nomenclature and Classification (CNMNC) of the International Mineralogical Association (IMA). In addition, new chemical and structural investigations were performed on nordite-(Ce) from Illutalik (Igdlutalik), South Greenland, leading to the first crystal structure refinement for nordite-(Ce).

The new mineral uranoclite (IMA2020-074), (UO2)2(OH)2Cl2(H2O)4, was found in the Blue Lizard mine, San Juan County, Utah, USA, where it occurs as tightly intergrown aggregates of irregular yellow crystals in a secondary assemblage with gypsum. The streak is very pale yellow and the fluorescence is bright green–white under 405 nm ultraviolet light. Crystals are translucent with vitreous lustre. The tenacity is brittle, the Mohs hardness is ~1½, the fracture is irregular. The mineral is soluble in H2O and has a calculated density of 4.038 g⋅cm–3. Electron microprobe analyses provided (UO2)2(OH)2.19Cl1.81(H2O)4. The six strongest powder X-ray diffraction lines are [dobs Å(I)(hkl)]: 8.85(38)(002), 5.340(100)(200, 110), 5.051(63)($\bar{2}$02), 4.421(83)(112, 004, 202), 3.781(38)($\bar{2}$12) and 3.586(57)(014, $\bar{2}$04). Uranoclite is monoclinic, P21/n, a = 10.763(8), b = 6.156(8), c = 17.798(8) Å, β = 95.656(15)°, V = 1173.5(18) Å3 and Z = 4. The structure is the same as that of synthetic (UO2)2(OH)2Cl2(H2O)4 in which the structural unit is a dimer consisting of two pentagonal bipyramids that share an equatorial OH–OH edge. The dimers are linked to one another only by hydrogen bonding. This is the second known uranyl mineral containing essential Cl and the first in which Cl coordinates to U6+.

Marshallsussmanite (IMA2013-067) is a new pyroxenoid mineral from the Wessels mine, Kalahari Manganese Field, Northern Cape Province, South Africa. Marshallsussmanite has ideal formula NaCaMnSi3O8(OH) and triclinic P$\bar{1}$ symmetry. Marshallsussmanite forms vitreous pink bladed crystals to 2.1 cm. The mineral shows perfect cleavage on both {100} and {001}. The chemical composition from electron microprobe (average of 20 analyses) and inductively coupled plasma mass spectrometer analysis (average of three analyses) is Li2O 0.43, Na2O 8.06, MgO 0.08, CaO 15.33, MnO 21.79, SiO2 51.71; totalling 97.40 wt.%. The empirical formula, normalized to 3 Si and assuming 1 H apfu is Li0.100Na0.906Ca0.953Mg0.007Mn1.071Si3O8(OH). Unit-cell parameters from single crystal X-ray diffraction are a = 7.7854(4), b = 6.9374(4), c = 6.8516(3) Å, α = 90.683(3)°, β = 94.330(3)°, γ = 102.856(3)°, V = 359.59(3) Å3; Z = 2. The crystal structure refinement converged with Robs = 0.0248 and site occupancy refinement gives crystal chemistry [Na0.948Li0.052][Ca0.793Mn0.207] [Mn0.937Ca0.063]Si3O8(OH). Marshallsussmanite is a single chain silicate with a repeat interval of three tetrahedra (i.e. dreier chain). Marshallsussmanite is a member of the pectolite group of pyroxenoids, which also includes barrydawsonite-(Y), cascandite, pectolite, serandite and tanohataite. Parallel silicate chains form layers, intercalated with well-ordered cation layers. Calcium and Mn both exhibit octahedral coordination, while Na has four bonded interactions in a coordination sphere (radius 3 Å) of seven separate O atoms. Procrystal electron density and bond valence modelling results are compared. The mineral has an unusually strong hydrogen bond with O4⋅⋅⋅O3 separation of 2.458(2) Å. Unlike pectolite and serandite, O4 in marshallsussmanite acts as an H-bond donor and O3 is an H-bond acceptor. Cation ordering in pyroxenoids has a substantial impact on the H position and corresponding H-bonding schemata.