The National Environmental Isotope Facility (NEIF) Radiocarbon Laboratory at the Scottish Universities Environmental Research Centre (SUERC) performs radiocarbon measurement of a wide range of sample matrices for applications in environmental research. Radiocarbon is applied to palaeoenvironmental, palaeoceanographic, and palaeoclimatic investigations, as well as work to understand the source, fate, turnover, and age of carbon in the modern carbon cycle. The NEIF Radiocarbon Laboratory supports users in the development and deployment of novel sampling techniques and laboratory approaches. Here, we give an overview of methods and procedures used by the laboratory to support the field collection, laboratory processing, and measurement of samples. This includes in-house development of novel and/or specialized methods and approaches, such as field collection of CO2 and CH4, hydropyrolysis, and ramped oxidation. The sample types covered include organic remains (e.g., plant material, peat, wood, charcoal, proteins), carbonates (e.g., speleothems, foraminifera, mollusc shell, travertine), waters (dissolved organic and inorganic carbon), gases (CO2 and CH4), soils and sediments (including sub-fractions).

Tree-ring cellulose is a commonly used material for radiocarbon analysis. Extracting cellulose is labor-consuming and several devices that enable batchwise extraction have been developed. However, these devices bear the risk of sample contamination. The present study describes a new device which improves upon two aspects of currently available devices. First, to prevent cross-sample-contamination, we redesigned the drainage module to enable independent removal of chemical waste from each individual sample funnel. Second, we added covers to the sample funnels to reduce the risk of external contamination. Cellulose purity (i.e., holocellulose) was confirmed by Fourier Transform Infrared (FTIR) Spectroscopy. Furthermore, accuracy of the radiocarbon analysis was confirmed by results of 14C-blank samples and samples of known age. In conclusion, while maintaining labor-saving, our modified device significantly reduces the risk of sample contamination during extraction of tree-ring cellulose.

Radiocarbon (14C) methodology was used to investigate the presence of biocarbon in different bio-based disposable packaging products. Packaging waste contributes to a municipal solid waste, which is increasing environmental concerns and resulting in the enhancement of EU regulations that aim to reduce packaging waste. The 14C amount in samples reflects how much of the biocarbon has been used. In this study, the concentration of 14C was determined in commonly used types of disposable packaging, such as cups, plates, straws, cutlery, and baking paper. Samples were made of materials such as paper, wheat bran, sugarcane, and wood. The mean concentration of the 14C isotope, measured by the accelerator mass spectrometry (AMS) technique, is greater than 100 pMC in all tested samples, indicating that the samples are modern. The relatively high 14C concentration values in the waterproof layer of the sample indicate that bioplastic, rather than plastic, was used in its production. The highest 14C isotope concentration values were measured for samples that used the oldest biomass (wood and paper), and the lowest for products from current crops (sugarcane and wheat bran), which is consistent with the trend of changes in 14C concentration in the biosphere. The study also addresses the problem of heterogeneity and representativeness of subsamples.

The absolute dating of mortar by accelerator mass spectrometry (AMS) has been the subject of renewed interest for several years. International intercomparison campaigns, called MODIS (MOrtar Dating Intercomparison Study), have been carried out. The first MODIS-1 campaign highlighted limitations in mortar dating, due to the similarity between the primary material to be dated (binder) and the contaminant (exogenous CaCO3). Methods have since emerged to overcome this problem and the need for a good preliminary characterization has been proven. The Laboratoire de Mesure du Carbone 14 (LMC14) took part in the second intercomparison campaign, MODIS2, by applying thermal decomposition increments to distinguish the carbonated binder, the organic matter contaminants (late in formation pyrogenic carbonate, LDH) and limestone. The LMC14 results on MODIS2 are quite conclusive on “pure” re-carbonated lime mortar binders containing little contaminant geological limestone but show their weaknesses for mortars heavily contaminated in Dolomites, which are difficult to discern from the binder. Recommendations for users of radiocarbon (14C) dating on mortar-based materials are made in the conclusion.

We report 27 planktonic and 21 benthic radiocarbon ages from the subtropical marine sediment core ODP Site 1063 (Bermuda Rise) for the time range between 30 and 14 ka before present. Despite low abundances of benthic specimens, it was possible to measure radiocarbon ages down to ∼10 µg carbon using a MICADAS and the gas ion source developed at ETH Zurich. Based on a tentative radiocarbon–independent age-model we found that the radiocarbon reservoir of the bottom water varied moderately relative to the analytical and age-model related uncertainties throughout the examined time-period, but larger differences in the radiocarbon reservoir appear to have affected the upper ocean layer. In particular, radiocarbon levels around Heinrich Stadial 2 reveal surface radiocarbon content similar to that of the atmosphere, while during Heinrich Stadial 1 surface waters were significantly depleted in 14C.

Nitra-Lupka is an important site from the Great Moravian period in Slovakia. A fortified hillfort which was supposed to be from this period, a battery of pottery kilns, and an Early Medieval cemetery were found on the site and researched during 1959–1975. Further, a few small-range excavations took place on the site at the beginning of the 21st century. At the same time, the dating of the hillfort to the Early Medieval period has begun to be questioned. There was also a problem with the localization of settlement that would belong to the battery of pottery kilns. The settlement was discovered recently in 2021 during development-led excavations at Nitra-Šindolka. It was found at the place of the construction of the ecoduct. Two ovens and four other features with numerous ceramics and other findings were discovered. Some of the bones (phalanges of cattle and goat/sheep) were dated by radiocarbon dating being the first 14C data obtained from this site and therefore of high importance for its precise dating.

In 2001, five French public organizations (CNRS, CEA, IRD, IRSN, and the Ministère de la Culture) signed an agreement to purchase a new accelerator mass spectrometer to provide radiocarbon dating services at the national level. The Laboratoire de Mesure du Carbone 14 (LMC14) was set up in Saclay (France) around ARTEMIS, an AMS system based on a 3MV Pelletron from NEC and installed in early 2003. In 2015, the LMC14 joined the Laboratoire des Sciences du Climat et de l’Environnement, making it possible to develop research projects in addition to the service activity and since 2021, the LMC14 has been a member of the IAEA Collaborating Centre “Atoms for Heritage” at the Université Paris-Saclay. Since 2003, 70,000 samples have been measured. Two-thirds of the samples have been prepared on site and one-third in two associated laboratories in Paris and Lyon. Over the past years, the LMC14 has participated in several international inter-comparisons and has continuously improved its capabilities by developing new protocols for preparation and measurement. In this paper, the radiocarbon dating services of the last 20 years for research institutions, museums and environmental monitoring are reviewed and recent results from environmental and archaeological research programs are highlighted.

Radiocarbon observations (Δ14C) in dissolved inorganic carbon (DIC) of seawater provide useful information about ocean carbon cycling and ocean circulation. To deliver high-quality observations, the Laboratory of Ion Beam Physics (LIP) at ETH-Zurich developed a new simplified method allowing the rapid analysis of radiocarbon in DIC of small seawater samples, which is continually assessed by following internal quality controls. However, a comparison with externally produced 14C measurements to better establish an equivalency between methods was still missing. Here, we make the first intercomparison with the National Ocean Sciences Accelerator Mass Spectrometry (NOSAMS) facility based on 14 duplicate seawater samples collected in 2020. We also compare with prior deep-water observations from the 1970s to 1990s. The results show a very good agreement in both comparisons. The mean Δ14C of 12 duplicate samples measured by LIP and NOSAMS were statistically identical within one sigma uncertainty while two other duplicate samples agreed within two sigma. Based on this small number of duplicate samples, LIP values appear to be slightly lower than the NOSAMS values, but more measurements will be needed for confirmation. We also comment on storage and preservation techniques used in this study, including the freezing of samples collected in foil bags.

Dating organic inclusions in mortars such as charcoals is a useful alternative or complementary method to dating mortars themselves, helping to estimate the building age. To assess the limitations of this dating approach, organic inclusions were searched for in surface mortar layers of six early to late medieval buildings in the Czech Republic with relatively well-known age. Altogether, 123 samples were found. About 80% were successfully radiocarbon (14C) dated. However, only 66% originated from wood relatively young when used in lime burning. To judge which samples are relevant to the actual building date, sufficient statistics is crucial. We recommend dating at least 5–10 samples, i.e., collecting 6–12 samples, for a site with uncomplicated building history, or per building phase. Otherwise, unrealistically old or young dates might be obtained. With the recommended statistics, inclusion-based dating provides building ages with uncertainty of 50–100 years.

We present case studies on three objects of high importance for cultural heritage in southern Poland, dated in years 2018–2022 at the Gliwice 14C and Mass Spectrometry Laboratory with radiocarbon (14C) and dendrochronology methods. The first was a richly ornamented wooden cane, discovered during excavations on the market in Bytom city. The cane can be associated with medieval court proceedings. The archaeological context indicates the 13th century AD, and the 14C result corresponds perfectly with this time, confirming that it is the oldest object of this type in Poland. The second was a 4-m-tall oak column from St. Leonard Church in Lipnica Murowana, a UNESCO heritage site. The local story said it was previously devoted to Światowid, a pagan deity. Our analysis excluded the pre-Christian age, as the tree was felled no earlier than the late 15th century, which is in agreement with historical records. The third was a wooden Saint Lawrence Church in Bobrowniki. The presbytery was covered with up to five layers of polychromic paintings, some of high artistic value. We dated three samples from the original wooden board, and by wiggle-matching, the calibrated age interval was narrowed to 1731–1754 cal AD.

Skin-based samples (leather, skin, and parchment) in archaeological, historic and museum settings are among the most challenging materials to radiocarbon (14C) date in terms of removing exogenous carbon sources—comparable to bone collagen in many respects but with much less empirical study to guide pretreatment approaches. In the case of leather, the 14C content of materials used in manufacturing the leather can vary greatly. The presence of leather manufacturing chemicals before pretreatment and their absence afterward is difficult to demonstrate, and the accuracy of dates depends upon isolating the original animal proteins and removing exogenous carbon. Parchments differ in production technique from leather but include similar unknowns. It is not clear that lessons learned in the treatment of one are always salient for treating the other. We measured the 14C content of variously pretreated leather, parchment, skin samples, and extracts, producing apparent ages that varied by hundreds or occasionally thousands of years depending upon sample pretreatment. Fourier Transform Infrared Spectroscopy (FTIR) and C:N ratios provided insight into the chemical composition of carbon reservoirs contributing to age differences. The results of these analyses demonstrated that XAD column chromatography resulted in the most accurate 14C dates for leather and samples of unknown tannage, and FTIR allowed for the detection of contamination that might have otherwise been overlooked.

The Pertosa Caves, today also known as the Pertosa-Auletta Caves, constitute an important karst system in the Campania region (southern Italy). Crossed by the waters of a river that re-emerges on the surface, they have an overall development of about 3 km. Thanks to the width of the entrance, the excellent location along a natural communication route through the mountains and the natural availability of water directly on the site, the initial part of the cavity was frequented by humans, without interruption, from prehistoric times to the Middle Ages. During the protohistory, in particular, the moment of most marked human presence is recorded in the cave. In this phase an extensive pile dwelling system was built on the waters of the underground river. The system was probably created to make the location, subject to frequent flooding, suitable for human settlement. This structure today constitutes an archaeological unicum not only in Italy but throughout Europe. We briefly analyze its general characteristics providing the results of a radiocarbon dating campaign which allowed to assess the occupation phases of the different contexts and the life span of the wooden artifacts, which came to us in a very good state of preservation. Radiocarbon data allowed to assess the chronological range of the human frequentation of the caves and to date the exceptionally well preserved underground pile dwelling system.

As there exists a growing demand for chronological research and tracer applications using radiocarbon (14C) analyses of samples smaller than 100 μg C, a compact micro-specific hydrogen graphitization method has been developed at the Xi’an Accelerator Mass Spectrometry (AMS) Center. This article describes the performance of the system and the mass of carbon background produced during ultra-small sample preparation. Furthermore, we discuss the results of contamination corrections and perform 14C analyses on small samples with known age or reference values. The results reveal that our 14C analysis of ultra-small samples of 10–100 μg C can obtain accurate and reliable results, and the micro-scale 14C-AMS analysis technique meets our research objectives for dating and tracer applications.

We present the results of a multifaceted study of an antiphonary—liturgical song book—presumably made in Venice in 1607, now in the Ringve, National Music Museum of Norway in Trondheim1. The book is hand-sewn on raised cords, bound in full leather on cardboard covers, originally with metal clamps. The paper block consists of pages printed in black and red that include both song texts and music scores. The red ink is based on vermillion and red lead while the black ink is carbon based. The treads and cords were made of flax. The leather used was made from goat skin. Radiocarbon results confirmed the printing date. The antiphonary shows several signs of repair including the possibility of re-binding. Animal-based glue was used for the repairs as well as for the sizing of both original and repair paper. Two potential periods were identified for reparations, 1670–1710 AD and 1782–1830 AD. This case study was conducted prior to the opening of a new permanent exhibition, Soundtracks, at the Ringve Museum where the book is displayed.

Radiocarbon (14C) measurements undertaken by the NERC Radiocarbon Laboratory using accelerator mass spectrometry (AMS) are now freely available on a new online database. The data presented covers measurement of the wide range of sample types that are processed for research projects in the fields of Earth and environmental science, supported by the United Kingdom’s Natural Environment Research Council. Sample types within the database include organic remains, soils, sediments, carbonates, dissolved organic and inorganic carbon, and carbon dioxide. Currently, the database contains 14C data for over 2400 individual samples that were measured and reported between 2005 and 2013, but it is envisaged that this will expand considerably as more data are made available. Contextual information such as sampling location and associated publications are provided where available, and searches can be performed on sample location, sample type, project number, and publication code. This new database compliments an existing, publicly available database of measurements performed using radiometric methods by the laboratory which has recently been expanded to present over 2000 measurements. It is hoped that this archive will prove useful to workers in the community who would benefit from greater availability of measurements for particular locations or sample types, and for the purposes of performing meta-analyses, and/or synthesis of larger datasets.

Cremated bones are a commonly preserved material and often found in burial environments where unburned bone may not be preserved. As such direct radiocarbon dating of cremated bone could be essential in determining the chronology of an event. Pretreatment of cremated bone exploits the structural carbonate component of the bone which survives cremation. However, due to the low abundance (ca. 0.1%) of this component, the extraction of an amount of endogenous carbon sufficient for radiocarbon dating may represent a challenge. Here we investigate two modifications to the phosphoric acid digestion protocol used during the preparation of cremated bones at the Oxford Radiocarbon Accelerator Unit (ORAU). The first of these was to use ultrasonication to release evolved CO2 from the viscous phosphoric acid and cremated bone mixture that is formed during digestion. The second was to double the amount of time during which evolved CO2 was removed from the reaction vessel by transfer into a cryogenically cooled ampoule. Ultrasonication of the digestion mixture failed to produce a significantly higher carbon yield, while double-time collection resulted in an average 21.5±13.8% increase of C yield without affecting the measured age. Extending the collection time can better enable reliable dating of small (less than 1 g) samples.

The lack of systematic chronologies is a key problem for the archaeological sites of Altai and adjacent territories during the Great Migration Period. Here we present an attempt to establish the chronology of the Bulan-Koby culture objects of the Karban-I necropolis by correlation of accelerator mass spectrometry radiocarbon (AMS 14C) data from human remains with data from archaeological dating methods. This is the first application of such a combined targeted 14C and archaeological approach to the chronology of the Great Migration Period materials of northern Altai, and in particular the Bulan-Koby culture. Systematic analysis of the mutual occurrence of dated types of certain grave goods and 14C dating of a series of samples supports a predominant period of use for the site that spans the 2nd–3rd c. AD, which corresponds to the early Xianbei period. This study demonstrates strong agreement between the indicators obtained by archaeological and radiocarbon methods, suggesting chronological consistency of the necropolis which functioned at the beginning of the Great Migration Period. The very combination of the two techniques will allow more precise and detailed chronologies for other archaeological complexes of Altai and adjacent territories from the first centuries of the 1st mil. AD, which is the basis of historical reconstructions.

Despite chronicles from the 16th century describing fertile alluvial plains and densely populated wetlands, archaeology in western Mexico has been little studied. The Directorate of Archaeological Salvage (DSA) of National Institute of Anthropology and History (INAH) has initiated a study of two sites in Costa Canuva, at the southern part of Nayarit state: Becerros and Naranjos. Thirty charcoal and shell samples were radiocarbon (14C) dated to determine occupation history. A Bayesian approach was used to build a chronological modeling from charcoal samples. Charcoal and shell samples found in the same context allowed us to calculate the ΔR values of marine offset for this period. In general, the archaeological sites of this area are divided into three major periods: Formative, Classic, and Postclassic. The 14C dating of Becerros recovered materials provided a chronological framework for the site’s occupation, from cal AD 169–1025, corroborating the ceramic studies in the sense that human settlement activities date from the Formative (300 BC–AD 600) to the Early Postclassic (AD 900–1200). Naranjos started in the Classic period and reached its occupancy peak in the Late Classic. The site’s occupation may have persisted for at least two centuries after the conquest of the Altiplano in 1521. The comparison of charcoal dates and associated shell samples from the Naranjos Unit gave a probability distribution for ΔR, that ranged from 118.5 to 199.5 with a mean value of 159 ± 4, slightly higher than other values obtained at nearby sites.