The demand for flexible grasping of various objects by robotic hands in the industry is rapidly growing. To address this, we propose a novel variable stiffness gripper (VSG). The VSG design is based on a parallel-guided beam structure inserted by a slider from one end, allowing stiffness variation by changing the length of the parallel beams participating in the system. This design enables continuous adjustment between high compliance and high stiffness of the gripper fingers, providing robustness through its mechanical structure. The linear analytical model of the deflection and stiffness of the parallel beam is derived, which is suitable for small and medium deflections. The contribution of each parameter of the parallel beam to the stiffness is analyzed and discussed. Also, a prototype of the VSG is developed, achieving a stiffness ratio of 70.9, which is highly competitive. Moreover, a vision-based force sensing method utilizing ArUco markers is proposed as a replacement for traditional force sensors. By this method, the VSG is capable of closed-loop control during the grasping process, ensuring efficiency and safety under a well-defined grasping strategy framework. Experimental tests are conducted to emphasize the importance and safety of stiffness variation. In addition, it shows the high performance of the VSG in adaptive grasping for asymmetric scenarios and its ability to flexible grasping for objects with various hardness and fragility. These findings provide new insights for future developments in the field of variable stiffness grippers.

This article describes a robot walker based on a new single degree-of-freedom six-bar leg mechanism that provides rectilinear, non-rotating, movement of the foot. The walker is statically stable and requires only two actuators, one for each side, to provide effective walking movement on a flat surface. We use Curvature Theory to design a four-bar linkage with a flat-sided coupler curve and then adds a translating link so that walker foot follows this coupler curve in rectilinear movement. A prototype walker was constructed that weighs 1.6 kg, is 180 mm tall, and travels at 162 mm/s. This is an innovative legged robot that has a simple reliable design.

We present the design and deployment of a capsule endoscope via external electromagnets for locomotion in large volumes alongside its digital twin implementation based on interval type-2 fuzzy logic systems (IT2-FLSs). To perform locomotion, we developed an external mechanism comprising five external electromagnets on a two-dimensional translational platform that is to be placed underneath the patients’ bed and integrated multiple Neodymium magnets into the capsule. The interaction between the central bottom external electromagnet and the internal magnet forms a fixed body frame at the capsule center, allowing rotation. The interaction between the external electromagnets and the two internal magnets results in rotation. The elevation of the capsule is accomplished due to the interaction between the upper external electromagnet and the internal magnets. Through simulations, we model the capsule rotation as a function of torque and drive voltages. We validated the proposed locomotion approach experimentally and observed that the results are highly nonlinear and uncertain. Thus, we define a regression problem in which IT2-FLSs, capable of representing nonlinearity and uncertainty, are learned. To verify the proposed locomotion approach and test the IT2-FLS, we leverage our experimental effort to a stomach phantom and finally to an ex vivo bovine stomach. The experimental results validate the locomotion capability and show that the IT2-FLS can capture uncertainties while resulting in satisfactory prediction performance. To showcase the benefit in a clinical scenario, we present a digital twin implementation of the proposed approach in a virtual environment that can link physical and virtual worlds in real time.

The concept of distance between two rigid-body poses is important in path planning, positioning precision, mechanism synthesis, and in many other applications. In the definition of such a distance, two approaches mainly prevail, which lead to a number of formulas devised to match the needs of motion tasks. Despite the different approaches and formulas, some important theoretical results, which drive toward distance-metrics definitions useful for design and application purposes, have been stated. This paper summarizes the two different approaches together with a critical review of the literature on the distance metrics they generated, and, then, it illustrates a technique, previously proposed by the author, for combining different metrics to obtain novel distance-metric definitions that are tailored to specific applications.

An accurate dynamic model of a robot is fundamentally important for a control system, while uncertainties residing in the model are inevitable in a physical robot system. The uncertainties can be categorized as internal disturbances and external disturbances in general. The former may include dynamic model errors and joint frictions, while the latter may include external payloads or human-exerted force to the robot. Disturbance observer is an important technique to estimate and compensate for the uncertainties of the dynamic model. Different types of disturbance observers have been developed to estimate the lumped uncertainties so far. In this paper, we conducted a brief survey on five typical types of observers from a perspective of practical implementation in a robot control system, including generalized momentum observer (GMO), joint velocity observer (JVOB), nonlinear disturbance observer (NDOB), disturbance Kalman filter (DKF), and extended state observer (ESO). First, we introduced the basics of each observer including equations and derivations. Two common types of disturbances are considered as two scenarios, that is, constant external disturbance and time-varying external disturbance. Then, the observers are separately implemented in each of the two simulated scenarios, and the disturbance tracking performance of each observer is presented while their performance in the same scenario has also been compared in the same figure. Finally, the main features and possible behaviors of each type of observer are summarized and discussed. This survey is devoted to helping readers learn the basic expressions of five typical observers and implement them in a robot control system.

Rehabilitation robots help the treatment of diseases by performing cyclic exercises for a long period of time. These exercises must perform movements of the patient’s limbs; thus, the robots are required to be flexible and safe. Among rehabilitation robots, cable robots are widely used due to their unique properties, such as being lightweight and the possibility of being equipped with magnetic hooks to improve both safety and ease of use. However, the elasticity and flexibility of cables result in vibrations of the payload and hooks. In this paper, the forced vibrations due to rehabilitation exercises are studied. Since the previous studies of the authors showed a weak coupling between longitudinal and transverse vibrations, a two-cable planar model for the study of transverse vibrations is developed. The model makes it possible to study the forced transverse vibrations due to both cable motion and robot motion. Stiffness and damping of the patient’s arm are considered. Results show that the cable system exhibits a simple linear behavior when excited by robot motion and a non-linear behavior when excited by cable motion.

Bayesian inference provides a probabilistic reasoning process for drawing conclusions based on imprecise and uncertain data that has been successful in many applications within robotics and information processing, but is most often considered in terms of data analysis rather than synthesis of behaviours. This paper presents the use of Bayesian inference as a means by which to perform Boolean operations in a logic programme while incorporating and propagating uncertainty information through logic operations by inference. Boolean logic operations are implemented in a Bayesian network of Bernoulli random variables with tensor-based discrete distributions to enable probabilistic hybrid logic programming of a robot. This enables Bayesian inference operations to coexist with Boolean logic in a unified system while retaining the ability to capture uncertainty by means of discrete probability distributions. Using a discrete Bayesian network with both Boolean and Bayesian elements, the proposed methodology is applied to navigate a mobile robot using hybrid Bayesian and Boolean operations to illustrate how this new approach improves robotic performance by inclusion of uncertainty without increasing the number of logic elements required. As any logical system could be programmed in this manner to integrate uncertainty into decision-making, this methodology can benefit a wide range of applications that use discrete or probabilistic logic.

This paper discusses the design and the experimental tests on Porcospino, a bio-inspired single-track mobile robot for inspection of unstructured environments characterized by narrow spaces. It is an evolution of SnakeTrack, a single-track robot with steering capabilities; differently from SnakeTrack, the track modules of Porcospino are characterized by elastic spines, which improve traction on uneven and irregular terrains. The main body is a vertebral column, comprising a series of vertebrae connected by compliant joints and two end modules. Each end module carries two sprockets, sharing a common actuator, to drive the single peripherical track. Moreover, each end module hosts an actuator for track steering. The remaining mobilities of the vertebral column allow it to cope passively with the terrain profile, to enhance traction. The control unit, batteries, drivers, and environmental sensors are placed along the vertebral column. Both the end modules are equipped with a camera for intermittent vision, which is possible thanks to openings realized on the track modules. The experimental campaign on the first Porcospino prototype is discussed, highlighting the differences with its earlier version.

This paper presents a novel cable-driven parallel robot with the aim of rehabilitating/exercising young and disabled children in drawing and writing tasks. The pyramidal topology was identified as providing the required three active translational Degrees of Freedom with a redundant set of five cables in a compact portable shape. In addition, this robot was designed with new features, as it is inexpensive, easy to control, easy to move to any place at home or school as it is fitting a home desk or classroom table. In this paper, we present the main steps for designing the proposed cable-driven pyramidal parallel robot. Specific attention is addressed to the design of the structure and the end effector as well as to establishing proper simulation models. Several simulations are proposed by implementing both kinematic and dynamic models to demonstrate the feasibility of multiple writing/drawing tasks. A specific user interface is proposed allowing both continuous and intermittent trajectories. A sliding mode control is implemented to achieve suitable tracking accuracy on a desired path. Finally, an experimental validation is successfully carried out by considering multiple trajectories for demonstrating the engineering feasibility and effectiveness of the proposed design and simulation models.

This paper deals with kinematic modeling and motion control of a novel antenna pedestal based on parallel robotic mechanism. Its active joints are two sliders equipped with DC motors on a circular rail. The synchronous and asynchronous motions of the two sliders enable the antenna to rotate in azimuth and pitch. In order to solve the problem of trajectory deviation caused by nonlinear friction and other uncertain disturbances, the structure of the antenna is described at the beginning, and then, the kinematic model is established based on geometry method. Then, the fuzzy PI (FPI) control system is designed based on the position feedback of the driving slider to realize the trajectory tracking of the desired curve. Finally, the parameters of the FPI controller are optimized and validated by Simulink simulation experiments. The tracking performance and the effectiveness of the control algorithm on prototype are verified by experiments of typical trajectory following control.

Handling and manipulating flexible porous objects is one of the main challenges in robotics for household and industrial tasks. Improving the design of grippers for flexible objects of manipulation is an important stage in the development of this topic. This article proposes a method of modeling a gripper for porous objects using the finite element method. It identifies the main parameters of the model that will affect the grasping force and the permeability of porous objects. The power characteristics of the obtained gripper model for different supply pressures, with varying porosity of the manipulated objects, are determined. The obtained characteristics are then used to find the correspondence of channel length for three textile materials with different permeable properties. An experimental study of the lifting force is conducted, and a comparison is made with the obtained modeling data for the presented samples. Additionally, using the obtained simulation data, an analysis of the pressure distribution on the surface of the porous object of manipulation is performed. As a result, it is found that the gripping device must use a design with elements to stabilize the distribution of pressure in its chamber, which will increase the stability of the gripping process.

Mobile robots are a key component for the automation of many tasks that either require high precision or are deemed too hazardous for human personnel. One of the typical duties for mobile robots in the industrial sector is to perform trajectory tracking, which involves pursuing a specific path through both space and time. In this paper, an iterative learning-based procedure for highly accurate tracking is proposed. This contribution shows how data-based techniques, namely Gaussian process regression, can be used to tailor a motion model to a specific reoccurring reference. The procedure is capable of explorative behavior meaning that the robot automatically explores states around the prescribed trajectory, enriching the data set for learning and increasing the robustness and practical training accuracy. The trade-off between highly accurate tracking and exploration is done automatically by an optimization-based reference generator using a suitable cost function minimizing the posterior variance of the underlying Gaussian process model. While this study focuses on omnidirectional mobile robots, the scheme can be applied to a wide range of mobile robots. The effectiveness of this approach is validated in meaningful real-world experiments on a custom-built omnidirectional mobile robot where it is shown that explorative behavior can outperform purely exploitative approaches.

The sampling and monitoring of nature have become an important subject due to the rapid loss of green areas. This work proposes a possible solution for a sampling method of the leaves using an ornithopter robot equipped with an onboard 94.1 g dual-arm cooperative manipulator. One hand of the robot is a scissors-type arm and the other one is a gripper to perform the collection, approximately similar to an operation by human fingers. In the move toward autonomy, a stereo camera has been added to the ornithopter to provide visual feedback for the stem, which reports the position of the cutting and grasping. The position of the stem is detected by a stereo vision processing system and the inverse kinematics of the dual-arm commands both gripper and scissors to the right position. Those trajectories are smooth and avoid any damage to the actuators. The real-time execution of the vision algorithm takes place in the lightweight main processor of the ornithopter which sends the estimated stem localization to a microcontroller board that controls the arms. The experimental results both indoors and outdoors confirmed the feasibility of this sampling method. The operation of the dual-arm manipulator is done after the perching of the system on a stem. The topic of perching has been presented in previous works and here we focus on the sampling procedure and vision/manipulator design. The flight experimentation also approves the weight of the dual-arm system for installation on the flapping-wing flying robot.

Performance indexes are a powerful tool to evaluate the behavior of industrial manipulators throughout their workspace and improve their performance. When dealing with intrinsically redundant manipulators, the additional joint influences their performance; hence, it is fundamental to consider the influence of the redundant joint when evaluating the performance index. This work improves the formulation of the kinematic directional index (KDI) by considering redundant manipulators. The KDI represents an improvement over traditional indexes, as it takes into account the direction of motion when evaluating the performance of a manipulator. However, in its current formulation, it is not suitable for redundant manipulators. Therefore, we extend the index to redundant manipulators. This is achieved by adopting a geometric approach that allows identifying the appropriate redundancy to maximize the velocity of a serial manipulator along the direction of motion. This approach is applied to a 4-degree-of-freedom (DOF) planar redundant manipulator and a 7-DOF spatial articulated one. Experimental validation for the articulated robot is presented, demonstrating the effectiveness of the proposed method and its advantages.

This paper presents a comprehensive study of the forward and inverse kinematics of a six-degrees-of-freedom (DoF) spatial manipulator with a novel architecture. Developed by Systemantics India Pvt. Ltd., Bangalore, and designated as the H6A (i.e., Hybrid 6-Axis), this manipulator consists of two arm-like branches, which are attached to a rigid waist at the proximal end and are coupled together via a wrist assembly at the other. Kinematics of the manipulator is challenging due to the presence of two multi-DoF passive joints: a spherical joint in the right arm and a universal in the left. The forward kinematic problem has eight solutions, which are derived analytically in the closed form. The inverse kinematic problem leads to $160$ solutions and involves the derivation of a $40$-degree polynomial equation, whose coefficients are obtained as closed-form symbolic expressions of the pose parameters of the end-effector, thus ensuring the generality of the results over all possible inputs. Furthermore, the analyses performed lead naturally to the conditions for various singularities involved, including certain non-trivial architecture singularities. The results are illustrated via numerical examples which are validated extensively.

Robotic rovers equipped with articulated rocker-bogie suspension have aroused great interest after the explorations on Mars; this interest has also shifted to different types of terrestrial applications such as in the agriculture, military, and rescue fields. The suspension can be designed so that, when the rover is on flat and horizontal ground, the weight is evenly distributed among the wheels; in this way, all wheels have the same traction capability and offer the same rolling resistance. As the operating conditions vary due to sloping ground, uneven ground surface, or different payload position, the weight distribution can undergo considerable variations. This type of suspension is statically determined with respect to weight, but it is indeterminate with respect to traction forces; the traction control system aims to avoid the wheels slippage. In this paper, the traction contribution that each wheel can provide, to overcome a step obstacle, is shown. Furthermore, the possibility of regulating the distribution of vertical loads among the wheels adopting a torsion spring, with adjustable preload, arranged between rocker and bogie, is evaluated. A suitable spring preload facilitates the initial phase of the obstacle overcoming if the rover advances with the bogie forward. Numerical simulations show that to increase the possibility of overcoming an obstacle it is sufficient for the spring preload to reduce the vertical load on the front wheel; in any case, a higher load variation would not be advisable as it could involves an excessive load difference among the wheels.

The paper addresses a significant challenge in on-orbit robotics servicing and assembly, which is to overcome the saturation setback of force/torque on robot joint and spacecraft actuators during the post-capture stage while controlling a target spacecraft with uncontrolled large angular and linear momentums. The authors propose a novel solution based on two robust and efficient control algorithms: Optimal Control Allocation (OCA) and Non-linear Model Predictive Control (NMPC). Both algorithms aim to minimize joint torques, spacecraft actuator moments, contact forces, and moments of a compound redundant system that includes a common payload (target spacecraft) grasped by dual n-degree space robotics manipulators mounted on a chaser spacecraft. The OCA algorithm minimizes a quadratic cost function using only the current states and the system dynamics, but the NMPC also considers the future state estimates and the control inputs over a specified prediction horizon. It is computationally more involved but provides superior results in reducing joint torques. The literature to date in application of MPC to robotics mainly focuses on linear models but the dual arm coordination is highly non-linear and there is no MPC application on dual arm coordination. The proposed discretized technique offers exact realizations (of a non-linear model) with elegance and simplicity and yet considers the full non-linear model of the dual arm coordinating system. It is computationally very efficient. The computer simulation results show that the proposed algorithms work efficiently, and the minimum torques, contact forces, and moments are realized. The developed algorithm also is very efficient in tracking problems.

Wearable robots, sometimes known as exoskeletons, are incredible devices for improving human strength, reducing fatigue, and restoring impaired mobility. The control of powered exoskeletons, on the other hand, is still a challenge. This necessitates the development of a technique to simulate exoskeleton–wearer interaction. This study uses a two-dimensional human skeletal model with a powered knee exoskeleton to predict the optimal lifting motion and assistive torque. For lifting motion prediction, an inverse dynamics optimization formulation is utilized. In addition, the electromechanical dynamics of the exoskeleton DC motor are modeled in the lifting optimization formulation. The design variables are human joint angle profiles and exoskeleton motor current profiles. The human joint torque square is minimized subject to physical and lifting task constraints. Then, the lifting optimization problem is solved by the gradient-based sparse nonlinear optimizer (SNOPT). Furthermore, the optimal exoskeleton torque is implemented through a two-phase control strategy to provide optimal assistance in lifting. Experimental validations of the optimal control with 6 Nm and 16 Nm maximum assistive torque are presented. Both 6 Nm and 16 Nm maximum optimal assistance of the exoskeletons reduce the mean values of vastus lateralis, biceps femoris, and latissimus dorsi muscle activations compared to the lifting without the exoskeleton. However, the mean value of the vastus medialis activation is increased by a small amount for the exoskeleton case, although its peak value is reduced. Finally, the experimental results demonstrate that the proposed lifting optimization formulation and control strategy are promising for powered knee exoskeleton for lifting tasks.

A robotic system constructed as a wheeled inverted pendulum (WIP) serves as an impressive demonstrator, since this kind of system is inherently nonlinear, unstable, and nonminimum phase. These properties may pose several difficulties, when it comes to control and trajectory planning. This paper shows a method for deriving a highly dynamic trajectory compliant with the system dynamics by means of solving an optimal control problem (OCP) using multiple shooting. The assumed task includes that the WIP should pass a height-restricting barrier. This can be achieved by leaning back or forth, in order to reduce the overall height of the WIP. The constraints inherent to the definition of this trajectory are nonconvex due to the shape of the robot. The constraint functions have a local minimum in an infeasible region. This can cause problems when the initial guess is within this infeasible region. To overcome this, a multistage approach is proposed for this special OCP to evade the infeasible local minimum. After solving four stages of subsequent optimization problems, the optimal trajectory is obtained and can be used as feedforward for the real system.

Sleep apnea is one of the most common sleep disorders. The consequences of undiagnosed sleep apnea can be very serious, increasing the risk of high blood pressure, heart disease, stroke, and Alzheimer’s disease over a long period of time. However, many people are often unaware of their condition. The gold standard for diagnosing sleep apnea is nighttime polysomnography monitoring in a specialized sleep laboratory. However, these diagnoses are expensive and the number of beds is limited, and there is insufficient monitoring in terms of time dimension. Existing methods for automated detection use no more than three physiological signals, but all other signals are also associated with the patient’s sleep. In addition, the limited amount of medical real annotation data, especially abnormal samples, lead to weak model generalization capability. The gap between model generalization capability and medical field needs still exists. In this paper, we propose a method for integrating medical interpretation rules into a long short-term memory neural network based on self-attention with multichannel respiratory signals as input. We obtain attention weights through a token-level attention mechanism and then extract key rules of medical interpretation to assist the weights, improving model generalization and reducing the dependence on data volume. Compared with the best prediction performance of existing methods, the average improvements of our method in accuracy, precision, and f1-score are 3.26%, 7.03%, and 1.78%, respectively. The algorithm tested the performance of our model on the Sleep Heart Health Study data set and found that the model outperformed existing methods and could help physicians make decisions in their practices.