The geochemistry of lake sediments provides valuable information on environmental conditions and geochemical processes in polar regions. To characterize geochemical composition and to analyse weathering and provenance, 26 lakes located in six islands of the South Shetland Islands (SSI) and James Ross Archipelago (JRA) were analysed. Regarding major composition, the studied lake sediments correspond to ferruginous mudstones and to a lesser extent to mudstones. The weathering indices indicate incipient chemical alteration (Chemical Index of Alteration = 52.6; Plagioclase Index of Alteration = 57.6). The La-Th-Sc plot shows different provenance signatures. SSI lake sediments correspond to oceanic island arcs, whereas those of JRA denote a signal of continental arcs with mixed sources. In James Ross Island lake sediments are of continental arcs (inland lakes), oceanic island arcs (coastal lakes) and a middle signature (foreland lakes). Multi-elemental analysis indicates that the sediments are enriched from regional basalts in Ba, Rb, Th, Cs and U (typical of silica-rich rocks) and depleted in Cr and Co due to mafic mineral weathering. The geochemical signals identified by principal component analysis enable us to group the sediments according to the studied islands and their geomorphological characteristics. This study underlines the importance of knowing the geochemical background levels in pristine lake sediments to evaluate potential future anthropogenic effects.

X-ray powder diffraction (XRD), transmission electron microscopy, infrared spectroscopy, differential thermal analysis, and surface area (BET) measurements were employed to investigate the transformation of microcrystalline maghemite to hematite. At 500°C pure maghemite was completely altered to hematite in 3 hr, whereas maghemites containing small amounts (≤1%) of Co, Ni, Zn, Cu, Mn, Al, V, and Cr required much longer heating times. The maghemite-to-hematite transformation temperature varied from 540° to 650°C. XRD line widths suggest that each particle of maghemite and hematite may have been a mosaic of many independent, coherently diffracting crystals. The transformation of maghemite to hematite at 650°C was accompanied by a reduction in surface area due to sintering of particles.

The incorporation of transition metals into hematite may limit the aqueous concentration and bioavailabity of several important nutrients and toxic heavy metals. Before predicting how hematite controls metal-cation solubility, we must understand the mechanisms by which metal cations are incorporated into hematite. Thus, we have studied the mechanism for Ni2+ and Mn3+ uptake into hematite using extended X-ray absorption fine structures (EXAFS) spectroscopy. EXAFS measurements show that the coordination environment of Ni2+ in hematite corresponds to that resulting from Ni2+ replacing Fe3+. No evidence for NiO or Ni(OH)2 was found. The infrared spectrum of Ni-substituted hematite shows an OH-stretch band at 3168 cm−1 and Fe-OH bending modes at 892 and 796 cm−1. These vibrational bands are similar to those found in goethite. The results suggest that the substitution of Ni2+ for Fe3+ is coupled with the protonation of one of the hematite oxygen atoms to maintain charge balance.

The solubility of Mn3+ in hematite is much less extensive than that of Ni2+ because of the strong Jahn-Teller distortion of Mn3+ in six-fold coordination. Structural evidence of Mn3+ substituting for Fe3+ in hematite was found for a composition of 3.3 mole % Mn2O3. However a sample with nominally 6.6 mole % Mn2O3 was found to consist of two phases: hematite and ramsdellite (MnO2). The results indicate that for cations, such as Mn3+ showing a strong Jahn-Teller effect, there is limited substitution in hematite.

The Madayi clay deposit consists of a thick sequence of residual white kaolinitic clay underlying the sedimentary Warkallai Formation, which includes gray carbonaceous kaolinitic clays, lignite, ferruginous kaolinitic clays, laterite and bauxite with ferricretes. The conditions of clay genesis and the economic significance of the major residual kaolin seam have been investigated. The raw clay and <2 μm fractions were subjected to X-ray diffraction (XRD), chemical analysis, differential thermal analysis (DTA), Fourier transform infrared (FTIR) spectroscopic and scanning electron microscopic (SEM) studies. The firing behavior of the <45 μm fraction of the major residual clay sequence (L), was investigated systematically to determine the potential industrial use of this kaolin.

Geochemical and morphological studies of different strata indicate the following conditions for clay formation. (1) intense lateritized weathering conditions for kaolinization of the residual white clay from parent quartzo-felspathic mica-gneiss. (2) reducing environment for the gray carbonaceous layers; an. (3) oxidizing environment for the uppermost hematite-rich ferruginous clay. Pyrite/marcasite enriched detrital gray carbonaceous clay shows two distinct environments for in situ kaolinite crystallization. (1) within plant fossils influenced by the high organic content and FeS2 leaching; and (2) precipitation from solution.

Incomplete kaolinization of white residual clay is evident from the presence of pyrophyllite, muscovite with lenticular cleavage void and a lower percentage of fines (<2 μm). The plant fossils from the uppermost portion of residual clay show pyrite mineralization. The Hinckley Index, FTIR and rare earth analysis point towards diverse geochemical environments of deposition and technological evaluation indicates its suitability for application in the ceramics industry.

Few studies have evaluated the joint effect of trace elements on spontaneous preterm birth (SPTB). This study aimed to examine the relationships between the individual or mixed maternal serum concentrations of Fe, Cu, Zn, Se, Sr and Mo during pregnancy, and risk of SPTB. Inductively coupled plasma MS was employed to determine maternal serum concentrations of the six trace elements in 192 cases with SPTB and 282 controls with full-term delivery. Multivariate logistic regression, weighted quantile sum regression (WQSR) and Bayesian kernel machine regression (BKMR) were used to evaluate the individual and joint effects of trace elements on SPTB. The median concentrations of Sr and Mo were significantly higher in controls than in SPTB group (P < 0·05). In multivariate logistic regression analysis, compared with the lowest quartile levels of individual trace elements, the third- and fourth-quartile Sr or Mo concentrations were significantly associated with reduced risk of SPTB with adjusted OR (aOR) of 0·432 (95 CI < 0·05). In multivariate logistic regression analysis, compared with the lowest quartile levels of individual trace elements, the third- and fourth-quartile Sr or Mo concentrations were significantly associated with reduced risk of SPTB with adjusted aOR of 0·432 (95 % CI 0·247, 0·756), 0·386 (95 % CI 0·213, 0·701), 0·512 (95 % CI 0·297, 0·883) and 0·559 (95 % CI 0·321, 0·972), respectively. WQSR revealed the inverse combined effect of the trace elements mixture on SPTB (aOR = 0·368, 95 % CI 0·228, 0·593). BKMR analysis confirmed the overall mixture of the trace elements was inversely associated with the risk of SPTB, and the independent effect of Sr and Mo was significant. Our findings suggest that the risk of SPTB decreased with concentrations of the six trace elements, with Sr and Mo being the major contributors.

The varied mineralogical composition of earthy materials and the quantity of elements extracted by simulated stomach acid substantiate the diversity of materials consumed by humans practicing geophagy. Direct consumption of ‘edible earths’ for medicinal and spiritual purposes occurs worldwide and is deeply rooted in ‘folk medicine’ and religion. The legends associated with the healing powers of the clay from Chimayo, New Mexico, provide an excellent example of the roots of geophagy. The clay mineral assemblages revealed by X-ray diffraction analysis of 22 samples from New Mexico, North America, and other parts of the world are highly variable. One might be monominerallic kaolinite or smectite, and another, a complex mixture of illite, kaolinite, smectite, and chlorite or vermiculite. The quantities of elements (Al, Si, K, Na, Ca, Mg, Fe, Mn, Ti, P, S, Ba, Sr, Pb, Zn, Cd, Co, Cu, Cr, Ni, V, Zr, Se, Mo, Be, Sb, and As) extracted by 0.12 M HCl varied from ∼1.0 mg/g to the limit of detectability, 0.0001 mg/g. Potential long-term human health effects were evaluated with the Reference Dose Ratio (RDR). It divides the quantity of the element extracted from 50 g of the total sample by the recommended reference dose (RfD) reported in the Environmental Protection Agency’s (EPA, USA) IRIS (Integrated Risk Information System) database. Median RDR values for Na, Cr, Sb, and As exceeded 1.0 indicating an abnormally high potential intake. Materials consumed by humans are so varied that caution should be used in comparing the results of one clay study with those of another without mineralogical and chemical data.

The chemical composition of the source magma along with the physiochemical conditions of the depositional environment are the main controlling factors in determining the behavior and mobility of trace elements and rare earth elements (REEs) during the transformation of volcanic ash to bentonite. The purpose of the present study was to determine the distribution pattern and mobility of trace elements and REEs in several bentonite deposits formed by diagenetic alteration of volcanic ash in shallow alkaline water in eastern Iran. Using geochemical and statistical data, the degree of weathering in the parent rocks and the distribution and mobility of trace elements and REEs during the alteration process at seven deposits (Chah-Taleb, Chah-Keshmir, Chah-Golestan, Chah-Pirouz, Gholeh-Gelia, Kharman-Sar, and Khal-Kooh) were studied. None of the parent rocks showed an advanced degree of depositional reworking and, therefore, their chemical composition is representative of the volcanic ash from which the bentonites were formed. In the chondrite-normalized REE patterns of both parent rocks and bentonites, the light rare earth elements (LREEs) were found to be enriched relative to the heavy rare earth elements (HREEs). The variation in δEu and δCe values suggested a high-temperature (<200°C), suboxic, aquatic environment in which the conversion of volcanic ash to bentonite occurred. In the bivariate correlation analysis, Si showed a strong inverse relationship with Al and LREEs, while large ion lithophile elements (LILEs), high field strength elements (HFSEs), HREEs, and LREEs displayed a positive correlation between the elements of their respective groups. The R2 values in the binary diagram of potential immobile elements against Al suggest a qualitative classification in which Ti, Gd, Ga, Pr, Tb, Nd, Sm, Ce, and Nb are considered immobile, and U, Dy, In, Sc, Hf, Zr, La, and Eu are considered to have had poor mobility during formation of the Eastern Iranian bentonite deposits.

Clay-rich deposits of Upper Cretaceous levels in the Taveiro (Reveles and S. Pedro) and Aveiro (Bustos) regions of west-central Portugal are economically and environmentally important, but detailed chemical and mineralogical characterization is lacking. The purpose of this study was to partially fill that gap by correlating the trace-element geochemistry (particularly the rare earth elements, REE) with the mineralogy of both the whole rock and of the <2 μm fraction along selected stratigraphic levels of the formations. The results will help the ceramics industry in the region and will be important in paleoreconstruction environmental studies.

Mineralogical and chemical characterizations were carried out using X-ray diffraction (XRD), X-ray fluorescence (XRF), and instrumental neutron activation analysis (INAA). The following clay-mineral associations were identified: (1) at Reveles — smectite, illite, and kaolin minerals; (2) at S. Pedro — kaolin minerals and illite; and (3) at Bustos — illite, kaolin minerals, and mixed-layer illite-smectite. The distribution of trace elements in the <2 μm fraction depended on the clay mineralogy, suggesting that the trace elements were incorporated in, adsorbed to, or even replaced major elements in the clays, as follows: (1) first-row transition elements, particularly Zn and Ga, were enriched when smectite predominated; (2) As, Rb, and Cs were enriched in this fraction of the S. Pedro deposit, the only one with Fe (oxyhydr)oxides and a high proportion of illite; and (3) REE were more concentrated when kaolin minerals predominated. Eu was enriched in the <2 μm fraction, which was due to preferential incorporation in the Fe (oxyhydr)oxides and/or carbonates.

Talc deposits, located mainly in three areas of north-central Turkey, are present in the ophiolitic series of the Cretaceous and in siliciclastic rocks of the Paleocene. Talc deposits related to ophiolites are between tectonite and cumulate occurring as beds and/or lenses and 0.1–3 cm thick fracture fillings within a 5 m brecciated zone with a vein-type bedding. Sedimentary-hosted talc beds and semi-rounded to angular talc grains (0.1–2 cm) range in thickness from 0.1 to 30 cm within marls and conglomerates. Talc veins form lenses (a few meters long) and spheroidal and/or ellipsoidal nodules (1–10 cm). Calcite, dolomite, serpentine and/or mixed-layered illite-smectite (I-S) minerals are encountered in the talc samples. Serpentine with positive U and Hf anomalies, and talc with positive Nb and Zr anomalies, and negative Ta and Ce anomalies are typically depleted in P and Ti, based on chondrite-normalized trace element patterns. The light rare earth element content of sedimentary-hosted talc with a negative Gd anomaly is richer than those of ultramafic-hosted talc with a negative anomaly for Eu as well as serpentine. Significantly, talc with a uniquely sedimentary origin tends to be the principal source of Nb, Hf, Zr, La, Ce, Pr and Nd with respect to serpentine. δ18O and δD values for talc range from +13.8 to +17.5‰ and −60 to −36‰, and those of serpentine are +9.4 and −88‰, indicating supergene conditions for sedimentary-hosted talc and hypogene for ultramafic-hosted talc. When compared with seawater, δ18O data indicate temperatures of 68°C and 80–98°C for the sedimentary- and ultramafic-hosted talc formations, respectively, and 100°C for serpentine, suggesting that talcification and serpentinization of ultramafic rocks both occurred at nearly the same time with various stages. All data show that the talc occurrences are divided into two types based on their mode of formation. The first corresponds to a serpentinization stage within the ophiolites. The others are the neoformation products of sedimentary deposition, diagenetic and post-diagenetic processes, respectively. Sedimentary-hosted talc also seems to have inherited trace element and isotopic compositions from the parent ultramafic rocks.

The Bracarense ceramics are characterized by a fine, pale yellow paste covered with a brownish yellow slip. The name is derived from Bracara Augusta, the Roman town located in the north of Portugal, where this type of ceramic paste was first found and identified. Various forms with the same type of paste occur, such as imitations of sigillata, terra sigillata and thin walls from the Augustus-Tiberius period, and common ware. Later, similar ceramics were also found in other archeological sites, e.g. Aquis Querquennis (Galiza, Spain), which question the location of the production center of this type of ceramic paste.

Mineralogical and chemical analyses showed that the majority of the Bracarense shards studied differ from the common ware of the Braga region. Despite minor differences, the Bracarense shards collected in Aquis Querquennis have the same geochemical pattern as those found in Bracara Augusta, i.e. they appear to have been manufactured with the same clay type. The firing products found indicate a kaolin character of the source clay, and point to firing temperatures near 900°C. The Aquis Querquennis shards have greater Br contents, which can be explained by use-wear and/or post-depositional processes, as this site is located in a thermal-water region.

The Antalya Unit, one of the allochthonous units of the Tauride belt, is of critical, regional tectonic importance because of the presence of rifting remnants related to the break-up of the northern margin of Gondwana during Triassic time. Paleozoic — Mesozoic sedimentary rocks of the Antalya Unit consist mainly of calcite, dolomite, quartz, feldspar, and phyllosilicate (illite-smectite, smectite, kaolinite, chlorite, illite, chlorite-smectite, and chlorite-vermiculite) minerals. Illite-smectite (I-S) was found in all of the sequences from Cambrian to Cretaceous, but smectite was only identified in Late Triassic-Cretaceous sediments. R0 I-S occurs exclusively in early-diagenetic Triassic—Cretaceous units of the Alakırçay Nappe (rift sediments), whereas R3 I-S is present in late-diagenetic to low-anchimetamorphic Cambrian—Early Triassic units of the Tahtalıdağ Nappe (pre-rift sediments). Kübler Index (KI) values and the illite content of I-S reflect increasing diagenetic grades along with increasing depth. Major-element, trace-element, rare-earth-element (REE), and stable-isotope (O and H) compositions were investigated in dioctahedral and trioctahedral smectites and I-S samples from the pre-rift and rift-related formations. Both total layer charge and interlayer K increase, whereas tetrahedral Si and interlayer Ca decrease from smectite to R3 I-S. Trace-element and REE concentrations of the I-S are greater in pre-rift sediments than in rift sediments, except for P, Eu, Ni, Cu, Zn, and Bi. On the basis of North American Shale Composite (NASC)-normalized values, the REE patterns of I-S in the pre-rift and rift sediments are clearly separate and distinct. Oxygen (δ18O) and hydrogen (δD) values relative to SMOW (Standard Mean Oceanic Water) of smectite and I-S reflect supergene conditions, with decreasing δ18O but increasing δD values with increasing diagenetic grade. Lower dD values for these I-S samples are characteristic of rift sediments, and pre-rift sediments have greater values. On the basis of isotopic data from these I-S samples, the diagenesis of the Antalya Unit possibly occurred under a high geothermal gradient (>35ºC/km), perhaps originating under typical extensional-basin conditions with high heat flow. The geochemical findings from I-S and smectites were controlled by diagenetic grade and can be used as an additional tool for understanding the basin maturity along with mineralogical data.

A number of different types of bentonite deposits formed by hydrothermal alteration and diagenetic processes are to be found in the Ordu area of the Eastern Black Sea region. The Ca- and Na-bentonite deposits are related to Upper Cretaceous tholeitic to calc-alkaline volcanites, predominantly dacite and andesite, and also include rhyodacite with lesser basalt and their pyroclastic equivalents. In the present study, dacite (PR1), perlite (PR2), moderately altered rocks (MPR), and Na- and Ca-bentonites were studied to describe and compare their mineralogical and geochemical properties and their conditions of formation by means of X-ray diffraction, optical microscopy, scanning electron microscopy, and chemical analytical techniques.

Ca-bentonites, except for smectite, contain opal-CT, feldspar, biotite, and rarely pyrite, while Na-bentonites contain smectite and less feldspar, opal-CT, kaolinite, and illite.

Progressive alteration of the PR2 caused depletion in K2O and Na2O and enrichment in MgO and CaO in all of the Ca-bentonite samples. Na2O was depleted in all of the Na-bentonites and in most of the MPR. The medium and heavy rare earth elements (MREE and HREE) show mass gain or mass loss in the Na-bentonites. The HREE show nearly immobile behavior in the Ca-bentonites. The rare earth elements (REE) and transition elements (TRE) mostly gained mass in the Ca-bentonites in contrast to Na-bentonites. Large-ion lithophile elements (LILE) are strongly depleted in all of the bentonites. The LREE, MREE, and HREE were strongly depleted in most of the MPR samples. TiO2, Lu, Tm, and Tb show immobile behavior in all samples.

PR1 exhibits a slightly positive Eu anomaly. Two MPR samples show slightly positive Eu anomalies (1.03, 1.13), and one Na-bentonite sample displays a slightly positive Eu anomaly (1.04). Most of the Nabentonites have weakly negative Eu anomalies, whereas perlite and the Ca-bentonite have a strongly negative Eu anomaly. The PR1, PR2, MPR, and Na-bentonite present a positive Ce anomaly, and the Ca-bentonite shows a moderately negative Ce anomaly. The Ca-montmorillonites are mainly hydrothermal in origin and derived from alteration of volcanoclastic material in situ and/or in the subaerial environment. The Na-montmorillonites formed by alteration and diagenesis of volcanoclastic material in the sedimentary basin.

This study utilizes speleothem trace elements as climate proxies to reconstruct hydroclimate variability over approximately 350 years in the Southern Cook Islands. Stalagmites Pu17 and Pu4 from Pouatea cave were analyzed using high-resolution LA-ICP-MS for trace elements (Mg, Na, Sr, P, U, Y). By monitoring cave dripwater and conducting regression analysis, we found that Mg, Sr, and Na in Pouatea dripwater mostly originated from marine aerosols, while Sr and Ba were primarily from bedrock, with additional Ba coming from marine aerosols and weathered oceanic basalt leaching. Mg was identified as the most reliable element for hydroclimate reconstruction due to its predominantly marine aerosol origin. Infiltration, via dilution of marine aerosols and bedrock inputs, was identified as the main driver of trace element variations in Pouatea at a seasonal scale. Transfer functions were established between each trace element and effective infiltration was calculated, with Mg showing the strongest correlation. The reconstructed infiltration data were compared with climate indices, showing an overarching role of the SPCZ and ENSO in controlling rainfall in the South Pacific. This research demonstrates the potential of speleothem trace elements for paleohydroclimate reconstructions, improving understanding of rainfall variability in the climatically vulnerable South Pacific Islands over the past millennia.

Plastics are an emerging class of environmental contaminants whose impacts are not yet fully understood. Trace elements, another class of environmental contaminant and commonly associated with plastics, have been widely researched and are known to be toxic to organisms. However, the combined impacts of these two contaminants on the environment remain unclear. Here, we reviewed the current knowledge of the types and concentrations of trace elements associated with plastics, the role of plastics in creating new exposure routes, the processes involved in the release of trace elements from plastics, and the transport of plastics through environmental compartments. Trace elements inherent in plastics, due to addition during manufacture for formation or functional properties, are typically present at higher concentrations than those that are acquired from the environment, and consequently are likely to have greater impacts. Trace elements are continuously released into environmental matrices from plastics but may be released at higher concentrations when exposed to rapid changes in environmental conditions (pH, ionic strength, redox potential, salinity, UV levels). Plastics potentially provide additional exposure routes for organisms to trace elements. For example, exposure to trace elements may occur when organisms ingest plastics, use them for shelter and nest building or as a surface to attach onto. Further research to improve our understanding of this complex contaminant should focus on environmentally relevant studies on trace element release and their effects.

Trace elements may play an important role in obesity. This study aimed to assess the plasma and dietary intake levels of four trace elements, Mn, Cu, Zn and Se in a rural Chinese population, and analyse the relationship between trace elements and obesity. A cross-sectional study involving 2587 participants was conducted. Logistic regression models were used to analyse the association between trace elements and obesity; restricted cubic spline (RCS) models were used to assess the dose–response relationship between trace elements and obesity; the weighted quantile sum (WQS) model was used to examine the potential interaction of four plasma trace elements on obesity. Logistic regression analysis showed that plasma Se concentrations in the fourth quartile (Q4) exhibited a lower risk of developing obesity than the first quartile (Q1) (central obesity: OR = 0·634, P = 0·002; general obesity: OR = 0·525, P = 0·005). Plasma Zn concentration in the third quartile (Q3) showed a lower risk of developing obesity in general obesity compared with the first quartile (Q1) (OR = 0·625, P = 0·036). In general obesity, the risk of morbidity was 1·727 and 1·923 times higher for the second and third (Q2, Q3) quartiles of dietary Mn intake than for Q1, respectively. RCS indicated an inverse U-shaped correlation between plasma Se and obesity. WQS revealed the combined effects of four trace elements were negatively associated with central obesity. Plasma Zn and Se were negatively associated with obesity, and dietary Mn was positively associated with obesity. The combined action of the four plasma trace elements had a negative effect on obesity.

Cognitive decline is a public health problem for the world’s ageing population. This study was to evaluate the relationships between serum Fe, blood Pb, Cd, Hg, Se and Mn and cognitive decline in elderly Americans. Data of this cross-sectional study were extracted from the National Health and Nutritional Examination Survey (NHANES 2011–2014). Cognitive performance was measured by the Consortium to Establish a Registry for Alzheimer’s Disease (CERAD), Animal Fluency and Digit Symbol Substitution Test (DSST) tests. Weighted univariable and multivariate logistic regression analyses were used to assess the associations between six trace elements and low cognitive performance. Subgroup analyses based on diabetes and hypertension history were further assessed the associations. A total of 2002 adults over 60 years old were included. After adjusting covariates, elevated serum Fe levels were associated with the decreased risk of low cognitive performance, especially in the elderly without diabetes history and with hypertension history. High blood Cd levels were associated with the high odds of low cognitive performance in old adults with diabetes and hypertension history. Elevated blood Mn levels were connected with low cognitive performance in old hypertensive people. High blood Pb levels were related to the high odds of low cognitive performance, especially in the elderly without diabetes and hypertension history. High blood Se levels were linked to the decreased risk of low cognitive performance in all the elderly. Appropriate Fe, Se supplementation and Fe-, Se-rich foods intake, while reducing exposure to Pb, Cd and Mn may be beneficial for cognitive function in the elderly.

Here, we present the results of carbon isotope and elemental analysis of one-year-old Pinus Sylvestris L. needles collected in 2021 from 10 sampling sites in a highly populated and industrialized area of Poland. The needles were exposed to air pollution for one year. The chemical analysis of the samples was performed using different methods: radiocarbon analysis by accelerator mass spectrometry, stable isotope analysis using isotope ratio mass spectrometry, and elemental analysis by inductively coupled plasma-atomic emission spectroscopy. Variations in the carbon isotopes and elemental composition of pine needles were due to a mixture of carbon dioxide originating from different sources such as households, vehicle traffic, and industrial factories.

This study investigates the Danian siliciclastic successions in the East Tethys in the Kopet-Dagh Basin, NE Iran, which are composed of conglomerates, sandstones, shales and mudstones. The studied interval includes significant changes in sedimentary environments from alluvial to fluvial systems. The Danian siliciclastic formation is sandwiched between two marine carbonate sequences. The effects of the late Palaeocene sea transgression can be traced back to the precipitation of several types of carbonate cement in the studied siliciclastic formation. Several diagenetic features have been identified in the studied successions. The most observed features comprise physical and chemical compaction, cementation, alteration, dissolution, fractures and fillings. Some of the mentioned diagenetic processes, such as cementation, may be seen in a range of diagenetic environments and phases, such as early meteoric, low depth and deep burial, and late meteoric after the tectonic uplifting. The calcite cements considered in this study have been subdivided into four types. Some of the calcite cements, such as the rim, gravity pendant and meniscus, are classified as type one. They have formed around the rock grains and show no luminescence. The blocky and poikilotopic types have been grouped in type two. They are deposited between grains and exhibit dark luminescence. Type three cement consists of some of the blocky and poikilotopic cements that have formed amid grains and present a bright luminescence. Finally, type four comprises filled fractures which display a dark luminescence (blocky cement). Geochemical data revealed that the categorized cement types were precipitated in three diagenetic environments: early meteoric; burial; and late meteoric after the uplifting. The meteoric diagenetic environment is subdivided into vadose and phreatic meteoric. The burial diagenetic environment is subdivided into shallow burial and deeper burial. The qualitative petrographic method contributed to the initial recognition of the diagenetic features. The semi-quantitative cathodoluminescence method, the quantitative major and trace elements, and oxygen and carbon stable isotope analysis were utilized to evaluate the exact diagenetic processes and environments. Finally, the diagenetic sequence was reconstructed and depicted as diagenetic models and a paragenesis sequence. The data of this study can lay the foundation for future studies on the siliciclastic diagenesis in the studied basin.