In order to gain a better understanding of clay and Fe (oxyhydr)oxide minerals formed during pedogenesis of basalts in tropical monsoonal Hainan (southern China), a basalt-derived lateritic soil at Nanyang, Hainan, was investigated comprehensively. The results show that the lateritic regolith consists uniformly of kaolinite and Fe (oxyhydr)oxide minerals, with trace gibbsite only in the AE horizon. Abundant dioctahedral smectite in the basalt bedrock formed due to primary hydrothermal alteration, and transformed to kaolinite rapidly in the highly weathering saprolite horizon. The ‘crystallinity’ of kaolinite is notably low and its Hinckley index fluctuates along the soil profile, resulting from intense ferrolysis due to fluctuations between wet/dry climate conditions. From the base to the top of the profile, maghemite shows a decreasing trend, whereas magnetite, hematite, and goethite exhibit a slightly increasing trend, indicating that maghemite formed as an initial product of basalt weathering. Formation of Fe (oxyhydr)oxide species in basalt-derived soil is mainly controlled by local environmental conditions such as soil moisture, redox, and acidic conditions; thus, iron mineral-based paleoclimatic proxies could not be used for subtropical to tropical soils. The highly weathered saprolite has a similar δ56Fe value (+0.06‰) to that (+0.07‰) of the parent rock, while the AE to middle E horizons have greater δ56Fe values of +0.12‰ to +0.19‰. Fe isotopic signatures correlate positively with the Fe mass transfer coefficient (R2=0.77, n=6, ρ<0.05), indicating repetitive weathering and relative accumulation of isotopically heavier Fe in the upper soil horizons, which occurred by reductive dissolution of organic matter under oxic conditions, as reflected by the greater U/Th.

Empirical reaction progress diagrams showing the trends of major element oxide concentrations (in g/cm3) as functions of bulk density for a diabase saprolite reveal discontinuities in the trends of Al2O3, MgO, H2O+, and nonextractable Fe2O3. The discontinuities coincide with discontinuities in the trends of (1) the kaolinite-smectite 001 peak-intensity ratio, (2) the smectite 002-001 peak intensity ratio, and (3) the smectite basal spacing as functions of bulk density. The discontinuities are apparently related to redox conditions in the weathering profile because they occur at a depth where siderite veins first appear in the saprolite. Oxidizing conditions in the upper part of the profile appear to have favored the formation of Ferich smectite over kaolinite, whereas reducing conditions deeper in the profile favored the formation of kaolinite over Al-rich smectite. These results indicate that where geochemical conditions favor retention of Fe over Al, smectites can form in preference to kaolinite or gibbsite even under conditions of strong leaching.

Laterite profiles developed from granite in southwestern Australia were studied by scanning electron microscopy. The morphology of soil materials reflects the mineralogy of secondary minerals formed from feldspar. In the saprolite, etched feldspar surfaces are coated with kaolinite or radiating, spherical aggregates of tubular halloysite. In the lower pallid zone these minerals have replaced most of the feldspar. In the upper pallid zone a porous framework has developed consisting mainly of quartz and gibbsite with 5-/μm euhedral gibbsite crystals in voids. Halloysite crystals in the upper pallid zone are partly unrolled and have splayed ends. Differences in mineralogy and morphology between profiles are thought to be due to variations in the intensity of leaching.

Imogolite occurs as tiny bumps less than 0.05 µm in diameter and about 0.3 µm long on amorphous thin layers on the surface of weathered plagioclase. The bumps grow outward from the surface to form projections, which then develop into a fibrous imogolite. The fibers branch out and grow into widespread networks or thin films which finally cover the entire surface of the plagioclase grain. The fibers are about 0.05 µm in diameter as seen by transmission electron microscopy.

High resolution imaging by transmission electron microscopy has revealed a mechanism for the weathering of intermediate microcline in a humid, temperate climate. Dissolution of the feldspar begins at the boundary of twinned and untwinned domains and produces circular holes which enlarge to form negative crystals. Amorphous, ring-shaped structures develop, about 25 Å in diameter, within the larger holes. These rings, in turn, crystallize to an arcuate phase having a 10-Å basal spacing and then to crinkled sheets of illite or dehydrated montmorillonite. The 10-Å layer silicate shows an irregular stacking sequence, including 10-,-20-, and 30-Å sequences. Included plagioclase crystals show a similar mechanism of weathering and, moreover, are more intensely weathered.

The sand and silt fractions of soils derived from Tertiary basalt in northeastern Ireland exhibit unusually high cation-exchange capacities. Smectite was identified by X-ray powder diffraction in all size fractions and was selectively dissolved by treatment with 1 N HCl and 0.5 N NaOH. Structural formulae, based on chemical analysis of the dissolved material, suggest that the smectite is intermediate in composition between a di- and a trioctahedral mineral and that the octahedral cation occupancy, together with the numbers of Mg and Fe atoms per unit cell, decreases with decrease in particle size of the soil fraction examined. The mean formula for the smectite in the clay separates is:

M+0.40(Si3.33Al0.67)(Al1.07Fe2+0.09 Fe3+0.41Mg0.82)O10(OH)2.

Similar analysis of smectite present in clay-size material separated from weathered basalt rock taken from the bases of the soil profiles showed that it had close to the full trioctahedral occupancy. It is suggested that the soil smectite is a weathering product of the trioctahedral smectite inherited from the weathered basalt.

Biotite in deeply weathered granitic rocks in southwestern Australia has altered to exfoliated grains composed of biotite, mixed-layer clay minerals, kaolinite, vermiculite, gibbsite, goethite, and hematite. Discrete vermiculite and vermiculite-dominant mixed-layer clay minerals are not major weathering products. Oxidation of octahedral iron in biotite is associated with ejection of octahedral cations, loss of interlayer K, and a contraction of the b-dimension of the biotite sheet. Si, Mg, Ca, Mn, K, and Na are lost from biotite during weathering, and Ti, Al, Ni, and Cr are retained. Fe and water have been added to the grains during weathering. Much Fe occurs as aggregates of microcystalline, aluminum-rich goethite particles on flake surfaces and within etchpits, with smaller amounts occurring as hexagonal arrangements of lath-shaped crystals of goethite on flake surfaces.

Morphological changes occurring in naturally weathered micas in seven residual soils from Ontario were studied. Splitting, exfoliation of the (100) planes, surface coats, filling of spaces with soil material as well as cracking and crumbling of (001) surfaces were the main morphological changes found to be taking place during natural weathering of mica particles. The significance of the observed feature in relation to the general theory of mica weathering is discussed.

The effects of NaOAc removal of carbonates, H2O2 removal of organic materials, and sodium citrate-bicarbonate-dithionite (SCBD) removal of iron oxides upon the X-ray powder diffraction (XRD) characteristics of clay minerals present within weathered volcanic ash deposits were examined. All pretreatments of samples derived from the Ae and Bhf horizons containing volcanic ash resulted in dramatic increases in XRD peak intensities, while the treatment of IIC-horizon samples resulted in subdued XRD peak intensities. Also, the chemical treatments produced an apparent increase in the amount of expandable clay minerals within the Ae horizon, due probably to the hydrolysis and removal of interlayer Al3+ when H2O2 and SCBD were used. Hence, poorly ordered and pedogenically modified vermiculite or vermiculite/montmorillonite interstratifications became “weathered” by H+ attack and Al3+ removal in a manner similar to the natural processes which take place in the acid and eluvial A horizon. In addition, possible XRD peak modification due to the dilution of crystalline clay concentrations by amorphous clay-size material appeared to be subordinate to the laboratory-induced chemical alteration of the weathered clay minerals.

The geochemistry of lake sediments provides valuable information on environmental conditions and geochemical processes in polar regions. To characterize geochemical composition and to analyse weathering and provenance, 26 lakes located in six islands of the South Shetland Islands (SSI) and James Ross Archipelago (JRA) were analysed. Regarding major composition, the studied lake sediments correspond to ferruginous mudstones and to a lesser extent to mudstones. The weathering indices indicate incipient chemical alteration (Chemical Index of Alteration = 52.6; Plagioclase Index of Alteration = 57.6). The La-Th-Sc plot shows different provenance signatures. SSI lake sediments correspond to oceanic island arcs, whereas those of JRA denote a signal of continental arcs with mixed sources. In James Ross Island lake sediments are of continental arcs (inland lakes), oceanic island arcs (coastal lakes) and a middle signature (foreland lakes). Multi-elemental analysis indicates that the sediments are enriched from regional basalts in Ba, Rb, Th, Cs and U (typical of silica-rich rocks) and depleted in Cr and Co due to mafic mineral weathering. The geochemical signals identified by principal component analysis enable us to group the sediments according to the studied islands and their geomorphological characteristics. This study underlines the importance of knowing the geochemical background levels in pristine lake sediments to evaluate potential future anthropogenic effects.

Orthopyroxene (En85) weathers initially by vacancy diffusion, and through this process hydration occurs and a sequence of biopyriboles develops, culminating in a talc-like layer silicate whose structure joins coherently to the orthopyroxene structure. Oxidation of Fe2+ to Fe3+ colors the altering pyroxene yellow. The ‘talc’ does not remain in structural coherence with the pyroxene after it has exceeded a few tens of nanometers in size; it is replaced by a mixture of talc and smectite. In some areas the mixture has an epitactic relation to the pyroxene, but commonly it fills faceted solution holes without crystallographic relation to the parent structure. Continued weathering extends the yellow zone at the periphery of the orthopyroxene, and the alteration product increases in smectite and decreases in 'talc’ During this stage of the reaction, MgO and SiO2 are released to form colorless true talc around the altering pyroxene. Eventually, the yellow alteration may become a smectite pseudomorph after orthopyroxene or it may be changed entirely to a mixture of vein talc and iron oxides. The complete conversion of orthopyroxene to talc plus oxides thus takes place through three sequential mineral reactions without the development of a noncrystalline phase.

During an electron microscope study of the weathering of granite from southern New South Wales, Australia, an assemblage of minerals including florencite and rhabdophane was discovered replacing apatite. Light rare earth elements released from allanite early in weathering apparently combined with P released by leaching of primary apatite to form secondary phases exhibiting a range of morphologies and compositions. Chondrite normalized fractionation patterns La > Nd > Sm > Ce; La > Ce > Nd ≥ Sm and La = Sm = Nd > Ce were identified. The rare earth elements were present in very small crystals and aggregates of secondary minerals (< 10 μm) and coexisted with clays and secondary Fe-Ti oxides. The weathered granite was enriched about 6 to 10 times in all rare earth elements except Ce relative to fresh granite if the abundances were corrected for apparent enrichment due to reduction in density. The rare earth elements were probably derived from higher in the weathering profile, possibly by destruction of florencite and rhabdophane in very intensively weathered rock. Ce remained relatively immobile during weathering, probably due to its oxidation to Ce4+.

Mineralogical weathering sequences in sediments overlying lignite beds were investigated in a core (27 m deep) from Calvert, Robertson County, northeast Texas. Weathering trends were evaluated based on the properties and relative distributions of both the expandable and non-expandable minerals. The sulfide minerals in these sediments are the most susceptible to weathering and were only observed in the unaltered (reduced) zone below 7 m. Oxidation of the sulfides has resulted in the formation of jarosite and gypsum in the upper 7 m of the core (oxidized zone). The oxidized zone is further characterized by reddish brown colors (high chroma), a greater quantity of dithionite-extractable iron, and absence of chlorite. Although the major clay minerals in these sediments (smectite, kaolinite, mica) are largely detrital, weathering has resulted in an increase in the content of kaolinite and a decrease in the content of mica towards the surface. The mica appears to have altered to a high-charge smectite characterized by basal spacings of 32 Â after intercalation with octadecylammonium cations. The high-charge smectite is most abundant in the soil horizons at the top of the core and gradually decreases with depth. A low-charge smectite is the most abundant species in the un weathered parent sediments and increases with depth. Key Words—Lignite, Oxidation, Reclamation, Smectite, Soil, Weathering.

The mineralogy of the clay fraction was studied for soils and saprolite on two Blue Ridge Front mountain slopes. The clay fraction contained the weathering products of primary minerals in the mica gneiss and schist parent rocks. Gibbsite is most abundant in the saprolite and residual soil horizons, where only chemical weathering has been operable. In colluvial soil horizons, where both physical and chemical weathering have occurred, the clay fraction consists largely of comminuted primary phyllosilicates —muscovite, chlorite, and possibly biotite—and their weathering products: vermiculite, interstratified biotite/vermiculite (B/V), and kaolinite. The clay-size chlorite contains Fe2+ as indicated by Mössbauer spectroscopy, and is more resistant to weathering than biotite. The vermiculite and B/V, both weathering products of biotite, contain Fe3+. Vermiculite in colluvial soils and, especially, surface horizons is weakly hydroxy-interlayered. The kaolinite in the clay fraction resulted at least partly from the comminution of kaolinized biotite in coarser fractions.

The hematite content ranged from 0 to 8% of the clay fraction and strongly correlates (r =.95) with dry clay redness, as measured by the redness rating: RR = (10 - YR hue) × (chroma) ÷ (value). The hematite is largely a product of the weathering of almandine; thus, the soil redness is dependent on the amount of almandine in the parent materials and its degree of weathering in the soils. Goethite (13–22% of the clay fraction) imparts a yellow-brown hue to soils derived from almandine-free parent rocks. The release of Fe in relatively low concentrations during the weathering of Fe-bearing primary minerals, particularly biotite, appears to have promoted the formation of goethite.

Iddingsite rimming olivine in a basanite from the Limberg, Germany, is composed of saponite and goethite. Transmission electron microscopy of ion-thinned, oriented crystals suggests a two-stage alteration process. At first, the olivine breaks into a mosaic of 50-Å diameter {110} bounded needle-shaped domains which change to a metastable hexagonal phase having a = 3.1 Å and c = 4.6 Å, probably of close-packed, metal-oxygen octahedra. This reaction opens solution channels in the olivine which are detectable from about 20-Å diameter and are parallel to the olivine y-axis. Laths of smectite, one or two layers thick, 20 Å wide, and as much as 100 Å long parallel to their y-axis nucleate from the metastable phase and begin to fill in the solution channels. The laths orient with smectite (001) parallel to olivine (100). As the channels widen, prismatic {110} goethite crystals form directly from the metastable hexagonal phase. This first stage thus provides heterogeneous nuclei of smectite and goethite, formed epitactically and perhaps topotactically from a metastable intermediary.

In a second stage,these nuclei enlarge by deposition from solution as water migrates readily through the solution channels. A reduction in total volume allows smectite veins to form, misoriented with respect to the olivine. The reaction conserves iron, requires the addition of aluminum and water, and releases magnesium and silicon. Electron microprobe analyses of the iddingsite indicate that the smectite is saponite.

The broad charge heterogeneity typical of nearly all smectites is not necessarily characteristic of vermiculites. In addition to vermiculites with pronounced heterogeneity, minerals with no or only limited charge heterogeneities are known. Layer charge and charge heterogeneity of 25 vermiculites were determined by alkylammonium ion exchange. The comparison of experimental basal spacings with dL/n-plots provided a simple determination of the average charge density. The spacings of high-charged vermiculites (≥0.8 eq/(Si,Al)4O10) with paraffin-type interlayers follow a straight line in the dL/n-plots. Lower-charged vermiculites were recognized by stepwise increasing spacings due to mono-, two-, or three-layer chain packings. Charge heterogeneity produced a superposition of the dL/n-curves for different charges, and the basal reflections of some of the alkylammonium derivatives became nonintegral.

Alteration products of andesite cobbles from wet soils formed in volcanic colluvial material were studied using petrographic, electron microscope, X-ray powder diffraction, and thermal techniques. Augite phenocrysts altered by congruent dissolution leaving voids which were subsequently filled with smectite. Plagioclase also altered to produce micrometer-size spheroidal aggregates of smectite. Halloysite was not observed within the altered cobbles, although it was abundant in the soil matrix. The formation of smectite in the altered cobbles was probably favored by the restrictive drainage of the microenvironment in combination with wet soil conditions.

Chloritic veins in serpentinite and their weathering products were analyzed by X-ray powder diffraction (XRD) and X-ray fluorescence spectrometry (XRF). Chlorite formed during the Hercynian-age orogenesis had apparently been partly transformed to high-charge vermiculite during subsequent metamorphism of the rocks. The idealized structural formulae for these minerals are (Al1.9Fe3+0.2Fe2+0.4Mg9.2Cr0.2)(Si5.8Al2.2)O20(OH)16 and X1.3(Fe3+0.7Fe2+0.1Mg5.2Ni0.1)(Si5.8Al2.2)O20(OH)4, respectively. This transformation appears to have taken place by the removal of the hydroxy-interlayer from the chlorite without major effect on the rest of the structure. It is not clear whether other hydroxy-interlayered vermiculites containing less tetrahedral aluminum were intermediate weathering products or inherited minerals. The ultimate weathering product of chlorite and vermiculites was a Fe3+-rich smectite, which probably formed by precipitation from solution.