Postemergence herbicides alone and in combination were evaluated for Venice mallow control in corn and onion in Colorado during 1986 and 1987. Season-long control of 88 to 98% in corn was obtained with bromoxynil plus cyanazine or atrazine; 2,4-D amine plus dicamba or bromoxynil; or linuron, bromoxynil, or dicamba applied alone. Oxyfluorfen plus bromoxynil in a split application controlled Venice mallow 80 to 99% all season in onions. Uncontrolled Venice mallow caused higher yield reductions in onions than in corn.

Agroecosystems are inherently complex, and practices aimed at managing one component of the system can have unintended consequences for other components of the system. Management decisions, therefore, can be improved by assessing and understanding the multivariate nature of agricultural systems and the multifunctional character of particular agricultural management practices. The act of simultaneously assessing and evaluating multiple characteristics or functions in agriculture also can be a valuable education and extension activity, because it draws on active and experiential methods of learning and because the process effectively reveals important functions and tradeoffs associated with agroecosystems and their management. Here we introduce a tool (the spider plot) and present a case-study exercise in which we used this tool to evaluate the multiple characteristics and functions of different cover crops within a field day workshop format. We also provide examples of how this approach could be used to assess other management practices or properties of agroecosystems and communicate multivariate concepts within a weed science classroom or extension environment.

In 2008, a population of johnsongrass collected from a soybean field near West Memphis, AR, in Crittenden County was confirmed resistant to glyphosate. This was the first documented case of glyphosate-resistant johnsongrass in Arkansas. The purpose of this study was to determine the geographical distribution of glyphosate-resistant johnsongrass in Arkansas crops and screen for resistance to additional herbicides. A total of 141 johnsongrass accessions were collected from 14 counties in Arkansas in the fall of 2008, 2009, and 2010 and screened for resistance to four of the most commonly used POST herbicides for johnsongrass control—imazethapyr, glyphosate, clethodim, and fluazifop. One accession potentially resistant to glyphosate (J12) and another with apparent resistance to imazethapyr (J14) were further evaluated in a dose–response experiment. The lethal dose required to kill 50% of the plants from the putative glyphosate-resistant and imazethapyr-resistant accessions was higher than that of a biotype known to be susceptible to these herbicides. The J12 accession had an LD50 of 1,741 g ae ha−1 glyphosate, which was 8.5-fold greater than the susceptible biotype. The J14 accession had an LD50 of 73 g ai ha−1 imazethapyr, which was 3.7-fold greater than the LD50 of the susceptible biotype. All other accessions were effectively controlled by the four evaluated herbicides. Widespread herbicide-resistant johnsongrass was not found in Arkansas, although accession J12 was resistant to glyphosate and J14 resistant to imazethapyr.

Dermatitis from poison ivy is a significant health problem. Considerable effort is devoted to the control of this invasive and virulent weed in urban areas. Glyphosate, triclopyr, 2,4-D, a 1 : 1 mixture of glyphosate and 2,4-D, and a 9 : 1 mixture of glyphosate and triclopyr were evaluated for poison ivy control. Each of these three herbicides and two mixtures were applied at nine or ten rates, which ranged in phytotoxicity from none to death. Poison ivy plants had been propagated and container-grown. Percent control, as determined from plant fresh weight reduction, was determined at 1 and 4 mo after treatment (MAT). Data were subjected to ANOVA followed by nonlinear regression. Rates required for 95% control at 1 and 4 MAT and the associated costs were determined for each of the three herbicides and two mixtures. Acceptable control (i.e., ≥ 95%) at 1 and 4 MAT could be obtained at a much lower cost with either triclopyr or 2,4-D than with either glyphosate alone or with the two glyphosate-containing mixtures. Nonlinear regression also was used to evaluate whether the two mixtures were interactive (i.e., synergistic or antagonistic) or not (i.e., additive). Glyphosate plus triclopyr was synergistic for control at both 1 and 4 MAT. Glyphosate plus 2,4-D was synergistic for control at 4 MAT only. However, for both mixtures, synergism was only evident at rates that controlled poison ivy ≤ 80%. Both mixtures were noninteractive at rates required for acceptable control.

In recent years, the use of cover crops has increased in U.S. crop production systems. An important aspect of successful cover crop establishment is the preceding crop and herbicide program, because some herbicides have the potential to persist in the soil for several months. Few studies have been conducted to evaluate the sensitivity of cover crops to common residual herbicides used in soybean production. The same field experiment was conducted in 2016 in Arkansas, Illinois, Indiana, Missouri, Tennessee, and Wisconsin, and repeated in Arkansas, Illinois, Indiana, Mississippi, and Missouri in 2017 to evaluate the potential of residual soybean herbicides to carryover and reduce cover crop establishment. Herbicides applied during the soybean growing season included acetochlor; acetochlor plus fomesafen; chlorimuron plus thifensulfuron; fomesafen; fomesafen plus S-metolachlor followed by acetochlor; imazethapyr; pyroxasulfone; S-metolachlor; S-metolachlor plus fomesafen; sulfentrazone plus S-metolachlor; sulfentrazone plus S-metolachlor followed by fomesafen plus S-metolachlor; and sulfentrazone plus S-metolachlor followed by fomesafen plus S-metolachlor followed by acetochlor. Across all herbicide treatments, the sensitivity of cover crops to herbicide residues in the fall, from greatest to least, was forage radish = turnip > annual ryegrass = winter oat = triticale > cereal rye = Austrian winter pea = hairy vetch = wheat > crimson clover. Fomesafen (applied 21 and 42 days after planting [(DAP]); chlorimuron plus thifensulfuron and pyroxasulfone applied 42 DAP; sulfentrazone plus S-metolachlor followed by fomesafen plus S-metolachlor; and sulfentrazone plus S-metolachlor followed by fomesafen plus S-metolachlor followed by acetochlor caused the highest visual ground cover reduction to cover crop species at the fall rating. Study results indicate cover crops are most at risk when following herbicide applications in soybean containing certain active ingredients such as fomesafen, but overall there is a fairly low risk of cover crop injury from residual soybean herbicides applied in the previous soybean crop.

Successful pigweed management requires an integrated strategy to delay the development of resistance to any single control tactic. Field trials were implemented during 2017 and 2018 in three counties in Kansas on dryland (limited rainfall, nonirrigated), glufosinate-resistant soybean. The objective was to assess pigweed control with combinations of a winter wheat cover crop (CC), three soybean row widths (76, 38, and 19 cm), row-crop cultivation 2.5 weeks after planting (WAP), and an herbicide program to develop integrated pigweed management recommendations. All combinations of the four components were assessed by 16 treatments. All treatments with the herbicide program resulted in excellent (>97%) pigweed control and were analyzed separately from the other components. Treatments containing row-crop cultivation reduced pigweed density and biomass 3 and 8 WAP in all locations compared with the 76-cm row width plus no CC treatment. CC impacts were mixed. In Riley County, Palmer amaranth density and biomass were reduced; in Reno County, no additional Palmer amaranth control was observed; in Franklin County, the CC had greater waterhemp density and biomass compared with the treatments containing no CC. Narrow row widths achieved the most consistent results of all cultural components when data were pooled across locations: Decreasing row widths from 76 to 38 cm resulted in a 23% reduction in pigweed biomass 8 WAP and decreasing row width from 38 to 19 cm achieved a 15% reduction. Row-crop cultivation should be incorporated where possible as a mechanical option to manage pigweed, and narrow row widths should be used to suppress late-season pigweed growth when feasible. Inconsistent pigweed control from CC was achieved and should be given special consideration before implementation. The integral use of these components with an herbicide program as a system should be recommended to achieve the best pigweed control and reduce the risk of developing herbicide resistance.

Field experiments were conducted in 2020 and 2021 to determine the effectiveness of electrocution on several weeds commonly encountered in Missouri soybean production using an implement known as The Weed Zapper™. In the first study, the effectiveness of electrocution on waterhemp, cocklebur, giant and common ragweed, horseweed, giant and yellow foxtail, and barnyardgrass was determined. Electrocution was applied when plants reached average heights and/or growth stages of 30 cm, 60 cm, flowering, pollination, and seed set. Electrocution was applied once or twice, at two different tractor speeds. Electrocution was more effective at the later plant growth stages. Pearson correlation coefficients indicated that control of weed species was most related to plant height and amount of plant moisture at the time of electrocution. When plants contained seed at the time of electrocution, viability was reduced from 54% to 80% among the species evaluated. A second study determined the effect of electrocution on late-season waterhemp plants, and also soybean injury and yield. Electrocution timings took place throughout reproductive soybean growth stages. The control of waterhemp escapes within the soybean trial ranged from 51% to 97%. Yield of soybean electrocuted at the R4 and R6 growth stages was similar to that of the nontreated control, but soybean yield was reduced by 11% to 26% following electrocution at all other timings. However, the visual injury and yield loss observed in these experiments likely represents a worst-case scenario because growers who maintain a clear height differential between waterhemp and the soybean canopy would not need to maintain contact with the soybean canopy. Overall, results from these experiments indicate that electrocution as part of an integrated weed-management program could eliminate late-season herbicide-resistant weed escapes in soybean, and reduce the number and viability of weed seed that return to the soil seedbank.

Field experiments were conducted to determine the effect of selected rice pesticides on the mycoherbicide Colletotrichum gloeosporioides (Penz.) Sacc. f. sp. aeschynomene (designated as C.g.a.) for northern jointvetch control in dry-seeded rice. Sequential treatments of pencycuron at 0.56 kg ai/ha, SN-84364 at 0.40 kg ai/ha applied 7 and 14 days after C.g.a., or pencycuron sprayed sequentially after a tank mixture of C.g.a. plus actifluorfen did not reduce infectivity of C.g.a. Also, propiconazol at 0.60 kg ai/ha or pencycuron applied 7 days before and after C.g.a. did not reduce fungus development on northern jointvetch. Sequential treatments of benomyl at 0.56 kg ai/ha or propiconazol applied 7 and 14 days after C.g.a. reduced pathogen activity on northern jointvetch.

We conducted a series of field experiments to determine the role of several factors that might contribute to the inconsistent control of common lambsquarters with glyphosate. Experiments in 2006 and 2007 determined common lambsquarters response to glyphosate under a wide range of measured environmental conditions. Glyphosate was applied at 0.84 kg ae ha−1 plus 3.8 kg ha−1 ammonium sulfate (AMS) to 10-cm-tall plants on 18 dates in each year and to 20-cm-tall plants on 18 dates in 2007. Control was less for six application dates relative to control for 48 other dates. Poor control was attributed to rainfall on one of these six dates, but for the other five dates, regression analysis did not identify any significant relationships between environmental conditions (relative humidity, temperature at time of treatment, or minimum and maximum temperature pre- and posttreatment) and control, even though a wide range of conditions occurred. To determine the effects of plant growth stage on control, glyphosate was applied at 0.1 to 3.2 kg ha−1 plus 3.8 kg ha−1 AMS to 10- and 20-cm-tall plants at four sites. The glyphosate ED50 value (the effective dose that reduced shoot mass by 50% relative to nontreated plants) was 1.9 to 3.0 times greater for 20- than 10-cm-tall plants in three site-years, but was not affected by plant height in one site-year. We also conducted experiments to determine the effect of rainfall on glyphosate efficacy. Across years, common lambsquarters control increased from 44 to 75% as the interval between glyphosate application (0.84 kg ha−1 + 3.8 kg ha−1 AMS) and simulated rainfall increased from 0.5 to 4.0 h, respectively. Our results did not identify environmental conditions that explained reduced glyphosate efficacy in all cases, but they suggest that rainfall after application and plant height can be important factors contributing to the inconsistent control of common lambsquarters.

Field research was conducted to evaluate the effectiveness of herbicides and carrot mowing for swamp dodder control. Herbicide evaluation indicated the highest carrot yield and lowest crop injury with pendimethalin compared to the industry standard linuron. Swamp dodder control with pendimethalin was greater than 80% at 56 and 70 d after planting (DAP). Other herbicides controlled swamp dodder, but crop injury was unacceptable. Carrot yield was greater where pendimethalin or s-metolachlor was applied compared to all other herbicides. Carrot mowing once 72, 86, or 100 DAP and mowing twice (72 plus 100 DAP) reduced the percentage of carrots infected with swamp dodder. Carrot infection level was least when mowed 100 DAP, and mowing did not increase yield compared to the non-treated check. These results suggest that the integration of pendimethalin for early-season swamp dodder control, followed by mowing 100 DAP, could reduce the impact of swamp dodder on carrots.

A high proportion of viable pollen grains must germinate to study the physiology of pollen growth to reduce the confounding effects of environmental influences on pollen germination. The objectives of this study were to evaluate the nuclear state and develop a suitable medium and culture method for in vitro germination of johnsongrass pollen. Johnsongrass pollen was trinucleate, and in vitro tests for pollen viability using Alexander's stain and a fluorochromatic reaction method (FCR) indicated johnsongrass pollen was viable (92.6 to 98.4%). A factorial treatment arrangement of four concentrations of sucrose, two concentrations of boric acid, and two concentrations of calcium nitrate were used to determine the optimum pollen-germination medium composition in suspension culture, agar culture, and cellophane membrane culture. Germination was highest in a suspension culture with a medium containing 0.3 M sucrose, 2.4 mM boric acid, and 3 mM calcium nitrate. Pollen germination using this medium was 78.9% when anthers were harvested just before anthesis.

The objective of this 2-yr study was to determine the optimal length of time between stale-seedbed preparation and planting that maximized weed control along with growth, development, and yield of cucumbers, compared with conventional seedbeds. Stale-seedbeds were prepared 40, 30, 20, and 10 d before planting (DBP), with an additional treatment of 40-DBP seedbed that received an application of glyphosate at 0.9 kg ae/ha, 20 DBP (40 and 20 DBP). The control (0 DBP) was prepared at planting. Glyphosate plus glufosinate ammonium at 1.26 and 0.042 kg ae/ha were applied after cucumber seeding to kill any emerged weeds. The experiment was a split-plot design in which one half of the main plots were treated with a preemergence application of clomazone at 0.42 kg ai/ha after cucumber seeding. Management of the stale-seedbed influenced the level of weed control and final crop yield. Generally, the 40-DBP seedbed had the highest weed biomass at planting and the lowest at harvest. Cucumber density, leaf number, and vine length were reduced in this treatment, and flowering was delayed because of the high weed biomass present during seedling emergence. All stale-seedbeds, with the exception of the 40-DBP stale-seedbed, had greater yields compared with the control (0 DBP) seedbed. The optimal timing of stale-seedbed preparation was 20 to 30 DBP. Seedbed preparation could be expanded to 40 DBP; however, an application of glyphosate at 20 DBP would be required to optimize yield. The stale-seedbed in combination with herbicides was a superior integrated weed management tool compared with conventional weed management practices.

Field studies were conducted in Powell, WY in 2006 and 2007 to determine the influence of season-long interference of various wild buckwheat densities and duration of interference on sugarbeet. Percent sucrose content was not affected by wild buckwheat interference. Root and sucrose yield loss per hectare increased as wild buckwheat density increased. The estimated percent yield loss as wild buckwheat density approaches infinity was 64 and 61% for root and sucrose yield loss, respectively. The estimated percent yield loss per unit weed density at low weed densities was 6% for both root and sucrose yield loss. Greater durations of wild buckwheat interference had a negative effect on sugarbeet root yield. The critical timing of weed removal (CTWR) to avoid 5 and 10% root yield loss was 32 and 48 d after sugarbeet emergence (DAE), respectively. These results show that wild buckwheat is competitive with sugarbeet and should be managed appropriately to forestall any negative effects on sugarbeet root and sucrose yield.

Glyphosate-resistant crops will be grown for the first time in Western Australia in 2009. A survey was conducted across 150,000 km2 of the southeastern part of the Western Australian grain belt in 2007 to determine whether glyphosate-resistant Conyza populations were present. Sixty-eight Conyza populations were collected from various fields and roadside locations. These populations were collected from areas where Conyza was known to exist. Populations were screened with glyphosate and all populations were found to be glyphosate-susceptible. While no glyphosate-resistant Conyza populations were found in the southeastern grain belt of Western Australia, it provides baseline data prior to the introduction of glyphosate-resistant crops in this region. It is important to monitor the efficacy of glyphosate as resistance becomes more prevalent in weeds of various cropping systems worldwide.

Research was conducted to evaluate structure–function relationships of citric acid esters that varied in alkyl chain number (mono-, di-, and tri-), ethylene oxide number (EO 4,7,9,25,35,52), and alkyl chain length (C8, C12/14, C16/18). Adjuvant efficacy was evaluated on two weed species for each of the four herbicides. The experimental adjuvants were applied with glyphosate and glufosinate on giant foxtail and common lambsquarters, imazamox on velvetleaf and common lambsquarters, and nicosulfuron on giant foxtail and large crabgrass. Adjuvant efficacy was weed and herbicide specific. EO number and alkyl chain length and number influenced adjuvant efficacy with the effectiveness of various combinations dependent on both herbicide and weed species. EO numbers as high as 52 were shown to be effective for glyphosate, glufosinate, and imazamox.

Two experiments, one focusing on preemergence (PRE) herbicides and the other on postemergence (POST) herbicides, were conducted and repeated in time to examine the utility of hyperspectral remote sensing data for discriminating common cocklebur, hemp sesbania, pitted morningglory, sicklepod, and soybean after PRE and POST herbicide application. Discriminant models were created from combinations of multiple indices. The model created from the second experimental run's data set and validated on the first experimental run's data provided an average of 97% correct classification of soybean and an overall average classification accuracy of 65% for all species. These data suggest that these models are relatively robust and could potentially be used across a wide range of herbicide applications in field scenarios. From the data set pooled across time and experiment types, a single discriminant model was created with multiple indices that discriminated soybean from weeds 88%, on average, regardless of herbicide, rate, or species. Signature amplitudes, an additional classification technique, produced variable results with respect to discriminating soybean from weeds after herbicide application and discriminating between controls and plants to which herbicides were applied; thus, this was not an adequate classification technique.

Tolerance of tomato cultivars to diphenyl ether herbicides applied postemergence was determined in greenhouse and field experiments. In greenhouse experiments, tomato cultivar tolerance differed, but acifluorfen injured all genotypes. ‘Carmen’, ‘PetoPride 2’ and ‘Heinz 1350’ tolerated acifluorfen while ‘Advantage’, and ‘Red Plum’ were susceptible. Growth habit and tolerance to 1.1 kg ae/ha acifluorfen was significantly correlated (r2 = 0.24). Field-planted tomato cultivars' tolerance to diphenyl ether herbicides applied postemergence differed. Heinz 1350 and ‘Veeroma’ tolerated diphenyl ethers, while Advantage and Red Plum were susceptible. Potency of diphenyl ethers also varied with oxyfluorfen the most injurious and acifluorfen and fomesafen the least injurious.

The effect of adding a spray adjuvant to SAN 582H tank mixtures with fluazifop-P, imazethapyr, and sethoxydim was evaluated. SAN 582H synergistically increased broadleaf signalgrass control with reduced rates of all three postemergence (POST) herbicides when no spray adjuvant was used and when crop oil concentrate was added. For example, broadleaf signalgrass control increased from 50% to 83% when SAN 582H was tank-mixed with 52 g ai/ha sethoxydim and crop oil concentrate. In another experiment, several formulations of SAN 582H, including blank solvent-only formulations (no SAN 582H), were evaluated in combination with a reduced rate of sethoxydim to determine the source of synergism from tank mixtures. The SAN 582H molecule, not the carrier solvents in formulated product, was determined to be the source of synergism. The synergistic properties of SAN 582H were compared to other chloroacetamides. Synergism from acetochlor was similar to SAN 582H when applied POST with a reduced rate of either fluazifop-P, imazethapyr, or sethoxydim for grass control. Metolachlor also synergistically increased the control of grasses with the POST herbicides; however, metolachlor caused considerable phytotoxicity when applied alone and synergistic interactions were detected less frequently. The efficacy of sethoxydim mixed with SAN 582H was evaluated under different soil moisture conditions. Broadleaf signalgrass control increased from 81% to 93% under dry, moisture-stressed conditions when 210 g/ha sethoxydim was tank- mixed with SAN 582H.

Studies on weed management systems with bromoxynil-resistant, glyphosate-resistant, and nontransgenic cotton cultivars in a no-tillage environment were evaluated in North Carolina and Tennessee in 1997 and 1998. All weed management systems in nontransgenic and bromoxynil-resistant cotton controlled sicklepod 72 to 78%, whereas sicklepod was controlled at least 94% in glyphosate-resistant cotton. Entireleaf and pitted morningglory, smooth pigweed, and common cocklebur were controlled at least 92% with all management systems. Fiber quality was also measured in Tennessee. Micronaire and fiber strength ranged from 4.35 to 4.55 units and 28.6 to 30.1 g/tex, respectively, in bromoxynil-resistant and glyphosate-resistant cultivars that received postemergence over-the-top (POT) herbicides. Harvest trash content ranged from 0.80 to 1.15% in systems where POT and late postemergence–directed (LAYBY) herbicides were used and was 1.65% where multiple glyphosate applications were used with no LAYBY herbicides. Cotton lint yield and net returns were generally highest in systems that included bromoxynil or pyrithiobac POT followed by cyanazine plus MSMA LAYBY or multiple glyphosate treatments where no LAYBY herbicides were used.

Determination of the active growth state of weeds may lead to more reliable predictions of herbicide efficacy. Experiments were conducted at Lacombe and Lethbridge, Alberta, Canada, from 1996 to 1998 to determine if wild oat leaf extension (growth) rate could be used to predict the efficacy of imazamethabenz and ICIA 0604. As expected, wild oat control increased and wild oat biomass decreased with increasing imazamethabenz and ICIA 0604 rates. Mean wild oat growth rates ranged from 6 to 44 mm over a 24-h time interval. Wild oat control at 25% of the recommended doses of ICIA 0604 or imazamethabenz increased as wild oat growth rate increased. However, wild oat growth rate did not influence herbicide efficacy at higher herbicide rates. Regression analysis confirmed that wild oat control at the lowest application rates increased 6 or 14% for every 10 mm of wild oat growth during the 24 h preceding herbicide application of ICIA 0604 or imazamethabenz, respectively. Covariance analysis confirmed the influence of wild oat growth rate on wild oat control by imazamethabenz but not by ICIA 0604. Monocot leaf extension rates may be useful for predicting herbicide efficacy in integrated weed management or decision support systems.