Diatoms are unicellular photosynthetic algae that autonomously fabricate a porous organized biosilica shell refined in billion years of evolution. They represent an inexhaustible source of low cost, biocompatible mesoporous silica. Despite the major advances in the genomic field, studies on diatom cell biology are still hampered by a lack of cellular tools. In particular, cell staining assays of diatoms viability are still limited or not well performant. Here we provide a phosphorescent organometallic iridium complex (Ir-Fcx) suitable to act as staining agent to detect diatoms viability.

We continue to investigate the design, synthesis, and characterization of electrically and ionically active conjugated polythiophene copolymers for integrating a variety of biomedical devices with living tissue. This paper will describe some of our most recent results, including the development of several new monomers that can tailor the surface chemistry, adhesion, and biointegration of these materials with neural cells. Our efforts have focused on copolymers of 3,4 ethylenedioxythiophene (EDOT), functionalized variants of EDOT (including EDOT-acid and the trifunctional EPh), and dopamine (DOPA). The resulting PEDOT-based copolymers have electrical, optical, mechanical, and adhesive properties that can be precisely tailored by fine tuning the chemical composition and structure. Here we present results on EDOT-dopamine bifunctional monomers and their corresponding polymers. We discuss the design and synthesis of an EDOT-cholesterol that combines the thiophene with a biological moiety known to exhibit surface-active behaviour. We will also introduce EDOT-aldehyde and EDOT-maleimide monomers and show how they can be used as the starting point for a wide variety of functionalized monomers and polymers.

Bioelectronics requires versatile, efficient, and low-cost interfaces between the biological entities and the conductive unit. Conductive polymers represent a valid choice to assemble such interfaces able to extract or impinge charges between the biological units and the conductive electronic systems. A drawback in the use of such systems is that the polymerization reaction often takes place in environments whose chemical and physical characteristics clash with the mild conditions required for living biological systems. In the present work, we successfully prove that the conductive polymer poly(gallic acid) can be synthesized in medium designed for bacterial growth, characterised by the presence of several adverse conditions including numerous chemicals, high ionic strength, and almost neutral pH. The gallic acid successfully polymerizes within few hours and with a 40% yield, by exploiting the catalytic activity of the enzyme laccase from the polypore mushroom Trametes versicolor. The resulting polymer is characterised by absorption and Nuclear Magnetic Resonance spectroscopies. The viability of Rhodobacter sphaeroides culture, assessed via the coffee-ring technique, shows an important, but not complete detrimental effect of the gallic acid on the bacterial growth.

We demonstrate the fabrication, by exclusive means of inkjet-printing, of capacitive relative humidity sensors on flexible, plastic substrate. These sensors can be successfully used for the measurement of relative-humidity in both air and common soil. We also show that the same technique may be used for the fabrication of the same type of sensors on the surface of the leaves of Elægnus Ebbingei (silverberry).Our results demonstrate the suitability of leaves as substrate for printed electronics and pave the way to the next generation of sensors to be used in fields such as agriculture and flower farming.

In recent times, nanotechnology has drawn the attention of the scientific community because of the wide variety of applications that can be done with it, from food packaging to targeted drug delivery; the use of nanoparticles has been a breakthrough in science that has now reached the market. Silver nanoparticles (Ag NPs) have unique properties due to the oscillation of electrons in the superficial plasmon. These nanostructures have been used in different applications in the area of nanomedicine, such as: targeted drug delivery, sensing and imaging, anti-fungal, anti-cancerous and biosensors. It has become evident that pathogenic bacteria are resisting antibiotics such as Penicillin becoming one of the most worrying topics in the world. People in the science community fear the day when we no longer can use these antibiotics, because the resistance of bacteria became too great, leaving us defenceless against any type of pathogens and possibly causing a catastrophe. However, we theorize that the possible solution to this problem could be the use of silver nanoparticles, given that there has not been a documented bacterial adaptation strategy that could give them resistance to Ag NPs. The purpose of this study is to find how the water-stable silver nanoparticles interact with different strains, including Gram negative and Gram-positive bacteria. The main objectives of our research were to synthesize and characterize water stable silver nanoparticles and test their potential bactericidal activity. We synthesized our Ag NPs using sodium citrate as a reducing agent. After synthesizing the nanoparticles, their optical properties were characterized by Ultraviolet-visible spectroscopy (UV-Vis); crystalline structure was evaluated with Electron Diffraction (ED) and X-Ray Diffraction (XRD); morphology was assessed by High Resolution Transmission Electron Microscopy (HR-TEM). Fourier Transform Infra-Red Spectroscopy (FT-IR) was used to indicate functional groups involved in the nanoparticle capping. Cultures were prepared with agarose and inoculated with the following bacterial strains: Bacillus cereus (Gram +), Micrococcus luteus (Gram +), Staphylococcus aureus (Gram +), Escherichia coli (Gram -), Citrobacter freundii (Gram -), Enterobacter aerogenes (Gram -), Klebsiella pneumoniae (Gram -), Proteus mirabilis (Gram -), Proteus vulgaris (Gram -) and Serratia marcescens (Gram -). Preliminary tests showed an inhibition diameter that surpassed 1.0 cm in all bacterial strains. We expect our Ag NPs to have a potential antibacterial activity towards all types of bacteria, due to oxidation of silver (Ag0 to Ag+).

Most of the photochemical activity of bacterial photosynthetic apparatuses occurs in the reaction center, a transmembrane protein complex which converts photons into charge-separated states across the membrane with a quantum yield close to unity, fuelling the metabolism of the organism. Integrating the reaction center from the bacterium Rhodobacter sphaeroides onto electroactive surfaces, it is possible to technologically exploit the efficiency of this natural machinery to generate a photovoltage upon Near Infra-Red illumination, which can be used in electronic architectures working in the electrolytic environment such as electrolyte-gated organic transistors and bio-photonic power cells. Here, photovoltage generation in reaction center-based bio-hybrid architectures is investigated by means of chronopotentiometry, isolating the contribution of the functionalisation layers and defining novel surface functionalization strategies for photovoltage tuning.

Prevascularized medical devices can improve cell therapy. Such devices may replace whole organ transplantation with hosting only the necessary therapeutic cells. We have developed a noninvasive optical technology to study the vascularization into such medical devices. In our technique, oxygen partial pressure within a device is monitored by Oxygen Sensitive Tubes (OSTs), comprising oxygen permeable silicone tubing with inner luminal surfaces coated by an oxygen-sensitive porphyrin dye. OSTs were placed within a PDMS device and transplanted into the subcutaneous space of athymic nude mice. An optical probe placed over the skin excites the OSTs with a pulse of light and detects the luminescent lifetime of emitted light, which is uniquely related to oxygen partial pressure. Furthermore, we developed a Dynamic Inhalation Gas Test (DIGT) to determine the oxygen transport rate between the microvasculature and the device. DIGT works by monitoring oxygen partial pressure in a device following a step change in inhaled-gas oxygen content. We report DIGT oxygen dynamics measured intermittently over eight weeks. Our study shows DIGT dynamics are unique to each implant, supporting the important role of the host tissue response in the availability of oxygen over time.

Dental pulp derived cells are pluripotent stem cells which can be differentiated along odontogenic, osteogenic, adipogenic, or neurogenic lineages. Odontogenic and osteogenic differentiation, in the absence of dexamethasone, have been shown to be highly dependent on substrate morphology and mechanics. Here we focus on neurogenic differentiation, using the protocol described by A. Arthur et al., and its dependence on substrate nature. DPSCs were cultured on PLA, a biodegradable polymer approved for internal use. The upregulation of genetic markers was compared with that of cells plated on standard TCP. The role of substrate morphology was investigated by plating on electrospun fibers approximately 2.0 ± 1.0 μm in diameter and on spin-cast thin films. The influence of graphene was investigated through the addition of 3% and 10% graphene nanoparticles to the films and fibers respectively.

The aspect ratio of the cells was measured using confocal microscopy. Cells grown on graphene containing substrates had larger aspect ratios than their non-graphene counterparts, and cells grown on microfibers were longer than their counterparts on the flat films. But the cell aspect ratio did not necessarily correlate with genetic differentiation. The results after 21 days of incubation indicated that early markers (TBP, β-III tubulin), decreased uniformly on all substrates relative to day 0, with the largest decrease occurring on the PLA flat film with graphene. The late stage marker, NEFM, which indicates differentiation, was upregulated to a significantly larger extent on all PLA substrates. No difference was observed between the fibers and the flat film in the absence of graphene, thus morphology did not play a significant role on this polymer. Addition of graphene did not affect the outcome on the fibers, but significantly suppressed the gene expression on the flat films. These results indicate that PLA is a promising scaffold material for neurogenic differentiation.

Heating coils utilize the concept of resistive heating to convert electrical energy into thermal energy. Uniform heating of the target area is the key performance indicator for heating coil design. Highly uniform distribution of temperature can be achieved by using a dense metal distribution in the area under consideration, however, this increases the cost of production significantly. A low-cost and efficient heating coil should have excellent temperature uniformity while having minimum metal consumption. In this work, space-filling fractal curves, such as Peano curve, Hilbert curve and Moore curve of various orders, have been studied as geometries for heating coils. In order to compare them in an effective way, the area of the geometries has been held constant at 30 mm × 30 mm and a constant power of 2 W has been maintained across all the geometries. Further, the thickness of the metal coils and their widths have been kept constant for all geometries. Finite Element Analysis (FEA) results show Hilbert and Moore curves of order-4, and Peano curve of order-3 outperform the typical double-spiral heater in terms of temperature uniformity and metal coil length.

This paper discusses new components and approaches to make stretchable optical fiber sensors better meet the power and washability requirements of wearables. First, an all-polymer quick connector allows the light source and photosensor to be quickly detached for washing. Second, the paper investigates the possibility of driving the sensors using ambient light instead of an onboard light source. While optical strain sensors and touch sensors have advantages over electronic ones in wet environments, and the intrinsic stretchability of the fibers is useful for soft robotics and highly conformal wearables, the typical light-emitting diode (LED) light source consumes more power than an electronic resistive or capacitive strain sensor. In this work, ambient light of uniform but unknown intensity is demonstrated to drive an elastomeric optical touch sensor in a differential configuration.

Phase change materials (PCMs) are getting increasing interest due to their capacity to absorb, store and release heat energy. Their effectiveness is characterized by quantities of absorbed/released heat energy, expressed as enthalpy. Specifically, the larger is the enthalpy, the more efficient thermoregulation effect is achieved. With this in mind, PCMs can be used in the manufacture of thermally regulated clothing in order to minimize heat strain and simultaneously improve thermal comfort. Moreover, such materials also modify their infrared radiation emission during phase transition, thus they can be envisioned to exploit thermal shielding applications. The aim of the present research was to investigate the infrared emissivity of textiles composed by cotton yarns with dispersed PCMs. The organic microcapsules of phase change materials, having different binding to the fibre mechanisms, were padded onto the fabric surface by pad-dry-cure method. The thermal properties and stabilities were measured using differential scanning calorimetry, while infrared emissivity was characterized using infrared thermographic technique. The obtained experimental results show a dynamic tuning of IR emissivity during heating/cooling process which can be correlated to the type and properties (enthalpy of fusion) of the corresponding PCM.

Flexible and stretchable capacitive pressure sensors have been developed in recent years due to their potential applications in health monitoring, robot skins, body activity measurements and so on. In order to enhance sensor sensitivity, researchers have changed structure of the dielectric of parallel plate capacitive sensor . Here we enhance the sensor sensitivities by changing electrode composition and explore the use of a woven electrode structure sensor with silver coated nylon yarn and EcoflexTM. The woven structure enhanced sensitivity 2.3 times relative to a simple cross-grid geometry (sensitivity was 0.003 kPa-1). Furthermore, it is also observed that the sensor with the woven electrode also had better repeatability and showed less creep than a device using carbon black electrodes. The woven structure of the electrodes enabled the device to be compliant, despite the presence of the stiff nylon fibres – thereby enabling good sensitivity without the creep seen in softer electrodes.