In transonic flow conditions, buffeting associated with finite-amplitude lift fluctuations can limit the operational envelope of an aircraft. For both airfoils and wings, these oscillations have been linked to global flow instabilities that arise from a Hopf bifurcation. We employ a combination of numerical simulations and global stability analysis to investigate the near-critical behaviour of the oscillatory buffet-onset instability on airfoils. The flow is governed by the unsteady Reynolds-averaged Navier–Stokes equations, with a basic state provided by a steady-state solution. In the weakly nonlinear formulation, the disturbance amplitude is described by the Landau equation. The linear growth rate can be determined from either the simulations or the stability analysis, and the Landau constant is derived from simulations resulting in finite-amplitude equilibrium states. The results show that the Landau constant is nearly independent of Mach number and angle of attack for a given airfoil. Using the Landau constant derived from a small number of simulations, the stability analysis can be employed to efficiently capture the essential finite-amplitude behaviour needed to estimate the buffet-onset boundary. The stability analysis is shown to capture the envelope of lift oscillations during a continuous pitch of an airfoil, from pre-buffet through post-buffet lift levels.

The spatio-temporal scales, as well as a comprehensive self-sustained mechanism of the reattachment unsteadiness in shock wave/boundary layer interaction, are investigated in this study. Direct numerical simulations reveal that the reattachment unsteadiness of a Mach 7.7 laminar inflow causes over $26\,\%$ variation in wall friction and up to $20\,\%$ fluctuation in heat flux at the reattachment of the separation bubble. A statistical approach, based on the local reattachment upstream movement, is proposed to identify the spanwise and temporal scales of reattachment unsteadiness. It is found that two different types, i.e. self-induced and random processes, dominate different regions of reattachment. A self-sustained mechanism is proposed to comprehend the reattachment unsteadiness in the self-induced region. The intrinsic instability of the separation bubble transports vorticity downstream, resulting in an inhomogeneous reattachment line, which gives rise to baroclinic production of quasi-streamwise vortices. The pairing of these vortices initiates high-speed streaks and shifts the reattachment line upstream. Ultimately, viscosity dissipates the vortices, triggering instability and a new cycle of reattachment unsteadiness. The temporal scale and maximum vorticity are estimated with the self-sustained mechanism via order-of-magnitude analysis of the enstrophy. The advection speed of friction, derived from the assumption of coherent structures advecting with a Blasius-type boundary layer, aligns with the numerical findings.

Supersonic shear layers experience instabilities that generate significant adverse effects; in complex configurations, these instabilities have global impacts as they foster compounding complications with other independent flow features. We consider the flow near the exit of a dual-stream rectangular nozzle. The supersonic core and sonic bypass streams mix downstream of a splitter plate trailing edge (SPTE) just above an adjacent deck. We perform two-dimensional direct numerical simulations with laminar inflow conditions to parametrically explore the influence of active flow control, considering various actuation angles and locations. The goal is to alleviate the prominent tone associated with vortices shed at the SPTE; these vortices initiate an unsteady shock system that affects the entire flow field through a shock-induced separation and the downstream evolution of plume shear layers. Resolvent analysis is performed on the baseline flow. The identified optimal response guides the placement of steady-blowing actuators. Since the resolvent analysis fundamentally investigates the input–output dynamics of a system, it is also utilized to uncover actuation-induced changes in the forcing–response dynamics. Spectral analysis shows that the baseline flow fluctuating energy is concentrated in the shedding instability. Actuating at optimal angles based on location disperses this energy into various flow features; this affects the shedding itself, and the structure and unsteadiness of the shock system, and thus the response of the deck and nozzle wall boundary layers and the plume. The resolvent analysis indicates, and Navier–Stokes solutions confirm, that favourable control is obtained by either indirectly or directly mitigating the baseline instability.

A previous paper of the authors (Duck & Stephen, J. Fluid Mech., vol. 917, 2021, A56) considered the effect of three-dimensional, temporally periodic, linear and incompressible disturbances on a Blasius boundary layer, in particular when the disturbance wavelength is both comparable to and longer than the boundary-layer thickness. This previous study revealed that, unlike the two-dimensional counterpart, a mode exists that exhibits regimes of downstream spatial growth. In this paper we extend the analysis to the compressible regime, based on the boundary-region equations methodology. The aforementioned unstable mode is seen to persist into the compressible regime, and is studied using a combination of numerical and asymptotic methods. The paper adopts several approaches. First is a numerical approach in which the spatial development of the disturbances is assessed. This then leads to a consideration of the far-downstream behaviour, using (several) asymptotic limits. Of some note, in addition to unstable modes found in the incompressible case, is the existence of a further class of instability, not found in the incompressible case (which is also analysed asymptotically), corresponding to what amounts to an inviscid instability. The far-downstream analysis enables a (sub-)classification into entropy and non-entropy modes. The former, according to this analysis, are spatially damped, with one caveat, as revealed by our marching procedure, which highlights how spatial development of disturbances can be important.

We present a Mach 15 air flow over a blunt two-dimensional wedge simulated using the direct molecular simulation method. As electronically excited states are not modelled, the resulting air mixture around the wedge contains the electronic ground states only, namely ${\rm N}_2(\text {X}^1 \varSigma _g^{+})$, ${\rm O}_2(\text {X}^3 \varSigma _g^{-})$, ${\rm NO}(\text {X}^2\varPi _r)$, ${\rm N}(^4{\rm S})$ and ${\rm O}(^3{\rm P})$. All the potential energy surfaces (PESs) that are used to model the various interactions between air particles are ab initio, with two notable exceptions, namely ${\rm N}_2+{\rm NO}$ and ${\rm O}_2+{\rm NO}$. At the selected free-stream conditions, strong vibrational non-equilibrium is observed in the shock layer. The flow is characterized by significant chemical activity, with near-complete oxygen dissociation, considerable formation of NO and minimal molecular nitrogen dissociation. Complex mass diffusion kinetics, driven by composition, temperature and pressure gradients, are identified in the shock layer. All these physical phenomena are directly coupled to, and responsible for, the mechanics of the gas flow and are all solely traceable to the PESs’ inputs, without the need for any thermochemical models, mixing rules or constitutive laws for transport properties. Because the flow is entirely at near-continuum conditions, it is a gas-phase thermophysics benchmark that is useful to enhance the fidelity of continuum models used in computational fluid dynamics of hypersonic flows.

In the present study, we perform direct numerical simulations of compressible turbulent boundary layers at free stream Mach numbers $2\unicode{x2013}6$ laden with dilute phase of spherical particles to investigate the Mach number effects on particle transport and dynamics. Most of the phenomena observed and well-recognized for inertia particles in incompressible wall-bounded turbulent flows – such as near-wall preferential accumulation and clustering beneath low-speed streaks, flatter mean velocity profiles, and trend variation of the particle velocity fluctuations – are identified in the compressible turbulent boundary layer as well. However, we find that the compressibility effects are significant for large inertia particles. As the Mach number increases, the near-wall accumulation and the small-scale clustering are alleviated, which is probably caused by the variations of the fluid density and viscosity that are crucial to particle dynamics. This can be affected by the fact that the forces acting on the particles with viscous Stokes number greater than 500 are modulated by the comparatively high particle Mach numbers in the near-wall region. This is also the reason for the abatement of the streamwise particle velocity fluctuation intensities with the Mach numbers.

Coherent small-amplitude unsteadiness of the shock wave and the separation region over a canonical double cone flow, termed in literature as oscillation-type unsteadiness, is experimentally studied at Mach 6. The double cone model is defined by three non-dimensional geometric parameters: fore- and aft-cone angles ($\theta _1$ and $\theta _2$), and ratio of the conical slant lengths ($\varLambda$). Previous studies of oscillations have been qualitative in nature, and mostly restricted to a special case of the cone model with fixed $\theta _1 = 0^\circ$ and $\theta _2 = 90^\circ$ (referred to as the spike-cylinder model), where $\varLambda$ becomes the sole governing parameter. In the present effort we investigate the self-sustained flow oscillations in the $\theta _1$-$\varLambda$ parameter space for fixed $\theta _2 = 90^\circ$ using high-speed schlieren visualisation. The experiments reveal two distinct subtypes of oscillations, characterised by the motion (or lack thereof) of the separation point on the fore-cone surface. The global time scale associated with flow oscillation is extracted using spectral proper orthogonal decomposition. The non-dimensional frequency (Strouhal number) of oscillation is seen to exhibit distinct scaling for the two oscillation subtypes. The relationship observed between the local flow properties, instability of the shear layer, and geometric constraints on the flow suggests that an aeroacoustic feedback mechanism sustains the oscillations. Based on this understanding, a simple model with no empiricism is developed for the Strouhal number. The model predictions are found to match well with experimental measurements. The model provides helpful physical insight into the nature of the self-sustained flow oscillations over a double cone at high speeds.

Cowl-induced incident shock wave/boundary layer interactions (ISWBLIs) under the influence of shoulder expansion represent one of the dominant phenomena in supersonic inlets. To provide a more comprehensive understanding of how an expansion corner affects the ISWBLI, a detailed experimental and analytical study is performed in a Mach 2.73 flow in this work. Pressure measurement, schlieren photography and surface oil-flow visualisation are used to record flow features, including the pressure distribution, separation extent and surface-flow topological structures. Our results reveal three types of ISWBLIs influenced by the expansion corner. When the shock intensity is weak, the separation is small scale with the expansion waves emanating from the expansion corner. This is the first type of expansion-corner-affected ISWBLI (EC-ISWBLI). When the incident shock wave is strong, large-scale separation occurs, accompanied by the disappearance of expansion waves, forming the second type of EC-SWBLI. The expansion corner induces a ‘lock-in’ effect in which the separation onset is consistently locked near the expansion corner regardless of the incident shock intensity and impingement position. The third type of EC-ISWBLI occurs when the shock is sufficiently strong and the impingement point is close to the expansion corner. In this interaction, the ‘lock-in’ effect ceases to manifest. Moreover, a shock polar-incorporating inviscid model is employed to elucidate the shock patterns. Two criteria are established by combining free interaction theory with this model. The first criterion provides valuable insights into the evolution of separations with a minimal overall pressure rise and the second criterion determines the threshold for the occurrence of the ‘lock-in’ effect.

In the present study, we performed direct numerical simulations for a hypersonic turbulent boundary layer over the windward side of a lifting body, the HyTRV model, at Mach number $6$ and attack angle 2$^{\circ }$ to investigate the global and local turbulent features, and evaluate its difference from canonical turbulent boundary layers. By scrutinizing the instantaneous and averaged flow fields, we found that the transverse curvature on the windward side of the HyTRV model induces the transverse opposing pressure gradients that push the flow on both sides towards the windward symmetry plane, yielding significant effects of the azimuthal inhomogeneity and large-scale cross-stream circulations, moderate and azimuthal independent influences of adverse pressure gradient, and negligible impact of the mean flow three-dimensionality. Further inspecting the local turbulent statistics, we identified that the mean and fluctuating velocity become increasingly similar to the highly decelerated turbulent boundary layers over flat plates in that the mean velocity deficit is enhanced, and the outer layer Reynolds stresses are amplified as it approaches the windward symmetry plane, and prove to be self-similar under the scaling of Wei & Knopp (J. Fluid Mech., vol. 958, 2023, A9) for adverse-pressure-gradient turbulent boundary layers. Conditionally averaged Reynolds stresses based on strong sweeping and ejection events demonstrated that the Kelvin–Helmholtz instability of the strong embedded shear layer induced by the large-scale cross-stream circulations is responsible for the turbulence amplification in the outer layer. The strong Reynolds analogy that relates the mean velocity and temperature was refined to incorporate the non-canonical effects, showing considerable improvements in the accuracy of such a formula. On the other hand, the temperature fluctuations are still transported passively, as indicated by their resemblance to the velocity. The conclusions obtained in the present study provide potentially profitable information for turbulent modelling modification for the accurate predictions of skin friction and wall heat transfer.

The geometrical properties of streamlines, such as the curvatures, directions and positions, are studied in steady inviscid compressible flow fields via differential geometry theories and conservation laws. The influences of the streamline geometries on the flow speeds and pressures are also identified and discussed. By transforming the streamlines to fill the domain and satisfy the boundary conditions, a unified geometry-based solver, the streamline transformation method, is proposed for both subsonic and supersonic regions. The governing equations and boundary conditions along streamlines and shock waves are also derived. This method is verified by numerical results of three typical flow fields, including the subsonic channel flow, the supersonic downstream of attached shock waves and especially the subsonic/supersonic downstream of detached bow shock waves. Both two-dimensional planar and axisymmetric flow fields are considered. Compared with the results from computational fluid dynamics, good agreements are achieved by this method, while fewer computational resources, by an order of magnitude, are consumed. Features of these flow fields are also analysed from a geometrical perspective, such as flow speeds and pressures deviated by the wall curvatures, and three-dimensional effects in the after-shock flow fields. For a hyperbolic-shaped bow shock wave, the stand-off distances and the transitions from subsonic to supersonic regions are also discussed. As indicated by the accuracy, efficiency and applicability in a wide range of flow speeds, the streamline transformation method would be a potential candidate for the theoretical analysis and inverse design of high-speed flow fields, especially where the subsonic regions exist downstream of strong shock waves.

This work is a numerical and experimental study of a rectangular thin plate undergoing stall flutter at Mach 0.8. This constitutes one of the first studies of this kind where three-dimensionality is fully implemented in a numerical simulation including the test-section effects characterizing wind-tunnel experiments. In order to break down the fluid–structure interaction to its main driving phenomena, an aerodynamic model is proposed that is based on computationally inexpensive steady-state simulations. Two types of dynamic instability are observed in the numerical simulations; Flutter by mode coalescence is promoted at zero flow incidence, however, high bending precludes this from happening for higher values of angle of attack. Stall flutter is instead a nonlinear one-degree type of instability. Both of these instability mechanisms can be explained in terms of hysteretic behaviour of the pressure distribution, which becomes more pronounced at high angles of attack, when a large separation region is formed. Tests were conducted employing titanium alloy plates in order to survive the aerodynamic loads characterizing the wind-tunnel initial transient. However, due to wall interference, high bending was promoted so that the internal stress exceeded the yield values before flutter could be measured. Numerical simulations were in general agreement with the experiment in terms of both amplitude and oscillation frequency.

This paper investigates the effect of curvature on curved detonation and its reflections. Specifically, the study focuses on two aspects: the effect of curvature on the postwave parameters and their gradients, and the stabilization of Mach reflection. Relationships are established between the curvature and the gradients of the postwave parameters, thus providing a basis for examining detonation reflections and obtaining a comprehensive understanding of curved detonation. In particular, these relationships offer a valuable analytical tool to predict the postwave gradients, as well as providing a fresh perspective to understand the transformation from Mach reflection to regular reflection in curved detonation. The validity of these relationships is confirmed by comparison with simulation results. Two mechanisms by which curvature influences the stationarity of Mach reflection are identified. An increase in wave angle and interference between wave systems leading to the generation and integration of subsonic zones are the reasons for the non-stationarity of the Mach reflection in curved detonation. Besides, the effect mechanisms of choked flow which is considered to be the root cause are analysed in detail. On the basis of a theoretical model, the development of a quantitative criterion for the stability of detonation reflection is proposed, and its validity is confirmed by simulations. This criterion is used in a comprehensive investigation of the primary factors affecting the stability of detonation wave reflections, providing insights that will be of great value for the further development of detonation engines.

Numerical analysis of a steady monatomic gas flow about the point of the regular reflection of a strong oblique shock wave from the symmetry plane is conducted with the Navier–Stokes–Fourier (NSF) equations, the regularized Grad 13-moment (R13) equations and the direct simulation Monte Carlo (DSMC) method. In contrast to the inviscid solution to this problem completely defined by the Rankine–Hugoniot (RH) relations, all three models predict a complicated flow structure with strong thermal non-equilibrium and a long wake with flow parameters not predicted by the RH relations. The temperature $T_y$ related to thermal motion of molecules in the direction normal to the symmetry plane has a maximum inside the reflection zone while in a planar shock wave the maximum is observed for the $T_x$ temperature. The R13 equations predict these features much better than the NSF equations and are in good agreement with the benchmark DSMC results. An analysis of the flow with the conservation equations was conducted in order to evaluate the effects of various processes on a fluid element moving along the symmetry plane. In contrast to the shock wave where effects of viscosity and heat conduction are one-dimensional with zeroth net contribution to the fluid-element energy across the shock, the flow across the zone of the shock reflection is dominated by two-dimensional effects with positive net contribution of viscosity and negative contribution of heat conduction to the fluid-element energy. These effects are believed to be the main source of the wake with parameters deviating from the RH values.

The aeroacoustic feedback loops in high-speed circular jets that impinge on a large flat plate are investigated via acoustic measurements and schlieren visualizations. In the present experiments, the nozzle pressure ratio ranges from 1.39 to 2.20, the corresponding ideally expanded jet Mach number $M_j$ is from 0.70 to 1.12 and the nozzle-to-plate distance ($H$) is from 4.0$D$ to 6.0$D$, where $D$ is the nozzle exit diameter. The results of acoustic measurements show that the strongest tones are generated in a limited frequency band. The empirical dispersion relations obtained from the fluctuating greyscales along the jet centreline of time-resolved schlieren images have good agreement with the dispersion relations from the vortex-sheet model. The coherent flow structures at tonal frequencies are extracted by spectral proper orthogonal decomposition and are analysed in detail. For the $M_j<0.82$ jets, the upstream-propagating guided jet mode is progressively confined to the potential core of jets with increasing tonal frequency, which provides the first direct experimental support for theoretical results. The evolution in the structures of acoustic resonance loops is studied along a single frequency stage of axisymmetric impinging tones. When the acoustic resonance between the upstream- and downstream-propagating guided jet modes is formed at tonal frequencies, the impinging tones are intenser. Slightly underexpanded impinging jets can simultaneously produce impingement tones and screech tones. Shock-cell structures have modulatory effects on the downstream-propagating Kelvin–Helmholtz wavepacket and the upstream- and downstream-propagating guided jet modes. Due to the interaction between the flow structures at the frequencies of impinging and screech tones, tones of axisymmetric modes can be produced outside the frequency ranges in which the axisymmetric upstream-propagating guided jet modes are supported by jets.

Self-sustained, low-frequency, coherent flow unsteadiness over rigid, stationary aerofoils in the transonic regime is referred to as transonic buffet. This study examines the role of shock waves in sustaining this transonic phenomenon and its relation to low-frequency oscillations (LFO) that occur in flow over aerofoils in the incompressible regime (Zaman et al., J. Fluid Mech., vol. 202, 1989, pp. 403–442). This is investigated by performing large-eddy simulations of the flow over a NACA0012 profile for a wide range of flow conditions under free-transition conditions. At low Reynolds numbers, zero incidence angle and sufficiently high free-stream Mach numbers, $M$, transonic buffet occurs with shock waves present in the flow. However, when $M$ alone is lowered, self-sustained, periodic oscillations at a low frequency are observed even though shock waves are absent and the entire flow field remains subsonic at all times. At higher incidence angles, the oscillations are sustained at progressively lower $M$ and are present even at $M=0.3$, where compressibility effects are low. A spectral proper orthogonal decomposition (SPOD) shows that the spatial structure of these oscillations is consistent for all cases. The SPOD modes are topologically similar, suggesting a connection between transonic buffet and LFO in the incompressible regime. Comparisons with other studies examining transonic buffet on various aerofoils, under forced-transition and fully turbulent conditions support this hypothesis. Future studies using tools of global linear stability analysis, especially at high free-stream Reynolds numbers are required to examine whether the underlying mechanisms of transonic buffet and incompressible LFO are the same.

We exploit the similarity between the mean momentum equation and the mean energy equation and derive transformations for mean temperature profiles in compressible wall-bounded flows. In contrast to prior studies that rely on the strong Reynolds analogy and the presumed similarity between the instantaneous and mean velocity and temperature signals, the discussion in this paper involves the Farve-averaged equations only. We establish that the compressible momentum and energy equations can be made identical to their incompressible counterparts under appropriate normalizations and coordinate transformations. Two types of transformations are explored for illustration purposes: Van Driest (VD)-type transformations and semi-local-type or Trettel–Larsson (TL)-type transformations. In our derivations, it becomes clear that VD-type velocity and temperature transformations hold exclusively within the logarithmic layer. On the other hand, TL-type transformations extend their applicability to incorporate wall-damping effects, at least in principle. Each type of transformation serves its distinct purpose and has its applicable range. However, it is noteworthy that while VD-type transformations can be assessed using measurements obtained from laboratory experiments, TL-type transformations necessitate viscosity and density information typically accessible only through numerical simulations. Finally, we justify the omission of the turbulent kinetic energy transfer term, a term that is unclosed, in the energy equation. This omission leads to closed-form temperature transformations that are valid for both adiabatic and isothermal walls.

The strong coupling interactions of non-equilibrium flow, microscopic particle collisions and radiative transitions within the shock layer of hypersonic atmospheric re-entry vehicles makes accurate prediction of the aerothermodynamics challenging. Therefore, in this study a self-consistent non-equilibrium flow, collisional–radiative reactions and radiative transfer fully coupled model are established to study the non-equilibrium characteristics of the flow field and radiation of vehicle atmospheric re-entry. The comparison of the present calculation results with flight data of FIRE II and previous results in the literature shows a reasonable agreement. The thermal, chemical and excited energy level non-equilibrium phenomena are obtained and analysed for the different FIRE II trajectory points, which form the critical basis for studying the heat transfer and radiation. The non-equilibrium distribution of excited energy levels significantly exists in the post-shock and near-wall regions due to the rapid vibrational dissociation and electronic under-excitation, as well as the wall catalytic reactions. The analysis of stagnation-point heating of FIRE II illustrates that the translational–rotational convection and the dissociation component diffusion play key roles in the aerodynamic heating of the wall region. The spectrally resolved radiative intensity in the entire flow field indicates that the vacuum ultraviolet radiation caused by the high-energy nitrogen atomic spectral lines makes the main contribution to the radiative transfer. Finally, it is found that the non-equilibrium flow–radiation coupling effect can exacerbate the excited energy level non-equilibrium, and further affect the gas radiative properties and radiative transfer. This fully coupled study provides an effective method for reasonable prediction of atmospheric re-entry flow and radiation fields.

In the present study, we investigate the compressibility effects in supersonic and hypersonic turbulent boundary layers under the influence of wall disturbances by exploiting direct numerical simulation databases at Mach numbers up to 6. Such wall disturbances enforce extra Reynolds shear stress on the wall and induce mean streamline curvature in rough wall turbulence that leads to the intensification of turbulent motions in the outer region. The turbulent and fluctuating Mach numbers, the density and the velocity divergence fluctuation intensities suggest that the compressibility effects are enhanced by the increment of the free-stream Mach number and the implementation of the wall disturbances. The differences between the Reynolds and Favre average due to the density fluctuations constitute approximately $9\,\%$ of the mean velocity close to the wall and $30\,\%$ of the Reynolds stress near the edge of the boundary layer, indicating their non-negligibility in turbulent modelling strategies. The comparatively strong compressive events behaving as eddy shocklets are observed at the free-stream Mach number of $6$ only in the cases with wall disturbances. By further splitting the velocity into the solenoidal and dilatational components with the Helmholtz decomposition, we found that the dilatational motions are organized as travelling wave packets in the wall-parallel planes close to the wall and as forward inclined structures in the form of radiated waves in the vertical planes. Despite their increased magnitudes and higher portion in the Reynolds normal and shear stresses, the dilatational motions show no tendency of contributing significantly to the skin friction and the production of turbulent kinetic energy due to their mitigation by the cross-correlation between the solenoidal and dilatational velocity components.

A highly compressive effect would suppress the mixing of the shear layer in a convex wall jet. The spanwise distributed protrusions at the nozzle lip are employed to achieve mixing enhancement in this study. The mixing characteristics and enhancement mechanisms are numerically investigated by the delayed detached-eddy simulation method based on the two-equation shear-stress transport model. A widely applicable flow spatiotemporal analysis method, called proper orthogonal decomposition (POD), is used to gain further insight into the dynamical behaviours of the flow instability mode. The results reveal that the centrifugal effect maintains and amplifies the initial perturbations induced by the spanwise distributed heterogeneities, resulting in forced streamwise vortices. The instabilities induced by the streamwise vortices significantly increase the growth rate of the jet half-width and the shear layer vorticity thickness. The spanwise wavelength of the streamwise vortices is consistent with the spanwise distributed forced excitation. In addition, the spanwise meandering motion of the streamwise vortices is observed, which is usually associated with the streamwise travelling wave. This is further confirmed by the POD analysis of the spanwise velocity fluctuation in both stream-radial and stream-span sections. Also, the spatial distributions of the POD modes with the highest energy provide information on the secondary instability modes. Both sinuous and varicose types of disturbances are observed in the unforced jet, whereas the forced jet seems to be dominated by the sinuous type instability, which is more easily excited than the varicose type instability. Moreover, the turbulence intensity in the forced jet is also significantly enhanced as expected due to the earlier and stronger streamwise vortices and associated instabilities. The enhanced turbulent characteristics of the highly compressible condition tend to be isotropic, whereas in the unforced jet, it is anisotropic due to the strong compressibility suppressing the spanwise turbulent fluctuations.