New agronomic practices are emerging in the green cane system to utilize sugarcane (Saccharum officinarum L.) straw for energy cogeneration, which necessitates its removal from the soil surface. This study has three main objectives: (1) evaluate the population dynamics and composition of Jamaican crabgrass (Digitaria horizontalis Willd.) and large crabgrass [Digitaria sanguinalis (L.) Scop.] under different sugarcane straw amounts, with and without herbicide treatment; (2) assess the development of sugarcane under different straw amounts; and (3) determine the amount of sugarcane straw that should be kept on the soil surface after harvest to ensure that it does not compromise the chemical control for Digitaria spp. in ratoon cane in a green cane system. We conducted this research at two experimental sites, one at the beginning and the other during the middle of the harvest season, over a span of 2 yr. Our primary treatments consisted of different amounts of sugarcane straw after harvest on the soil surface (0, 5, 10, and 15 Mg ha−1), while secondary treatments included the herbicide application (sulfentrazone + tebuthiuron for the beginning of harvest season and isoxaflutole + tebuthiuron for the middle of harvest season). The Digitaria spp. exhibited higher density (four times more) and dry matter (two times more) in scenarios with a lower sugarcane straw amount (5 Mg ha−1) on the soil surface and no herbicide application. However, a higher straw amount (15 Mg ha−1) contributed to reduced Digitaria spp. infestation and to improved sugarcane yield. According to this research, it is essential to maintain at least 10 Mg ha−1 of sugarcane straw on the soil surface and remove only 5 Mg ha−1 for energy cogeneration.

Amaranthus species are problematic weeds in snap bean production systems. They reduce crop yields, and their stem fragments contaminate harvested pods. Knowledge of snap bean tolerance to different preemergence herbicides is limited; however, knowing this tolerance is essential for planning a reliable weed management system, breeding herbicide-tolerant cultivars, and registering herbicides for use on minor crops such as snap bean. Field trials were conducted in 2021 and 2022 to determine the tolerance of eight snap bean cultivars to preemergence herbicides with activity on Amaranthus species, including dimethenamid-P, flumioxazin, lactofen, metribuzin, saflufenacil, and sulfentrazone. Snap bean plant density (number of plants per square meter), plant biomass (grams per plant), and canopy biomass (grams per square meter) 21 d after treatment were used to assess crop tolerance to a range of herbicide rates. Linear mixed-effects regression models were fitted to quantify the relationships between preemergence herbicide rate and snap bean cultivar tolerance. Results indicated a high margin of crop safety with dimethenamid-P and lactofen for weed control in snap bean, and a low margin of crop safety with metribuzin and saflufenacil. Results indicated differential cultivar tolerance to flumioxazin and sulfentrazone, which could be driven by genetic variability among cultivars.

Downy brome is a cleistogamous facultative winter-annual grass weed that invades cropland, pastureland, and ruderal areas in western North America. Glyphosate-resistant downy brome, the first known glyphosate-resistant grass weed in Canada, was confirmed in a glyphosate-resistant canola field in southern Alberta in 2021. A controlled-environment study was conducted to determine the impact of preemergence soil-applied residual herbicides on glyphosate-resistant and susceptible downy brome in two field soils. Flumioxazin/pyroxasulfone (70/89 g ai ha−1), carfentrazone/pyroxasulfone (18/150 g ai ha−1), sulfentrazone/pyroxasulfone (100/100 or 150/150 g ai ha−1), and saflufenacil/pyroxasulfone (36/120 g ai ha−1) resulted in excellent (≥90%) visible control and downy brome biomass reduction 8 wk after treatment (WAT). The low rate of carfentrazone/pyroxasulfone (12/100 g ai ha−1) resulted in good (≥80%) visible control and biomass reduction 8 WAT, while the low and medium rates of saflufenacil/pyroxasulfone (18/60 or 25/84 g ai ha−1) resulted in ≥80% biomass reduction but suppression only (66% to 75%) based on visible control. Flumioxazin alone (105 g ai ha−1) resulted in good visible control (81%) 8 WAT in a sandy loam soil, but poor (13%) control in a clay loam soil. Soil type affected plant growth as evidenced by reduced growth in the untreated sandy loam soil compared to clay loam soil. The glyphosate-resistant population emerged and grew more vigorously than the glyphosate-susceptible population resulting in greater plant densities in the untreated control and some less-effective herbicide treatments. These results suggest that mixtures of a protoporphyrinogen oxidase-inhibiting herbicide with the very-long-chain fatty acid elongase inhibitor pyroxasulfone applied preemergence at ≥89 g ai ha−1 could be effective components of an herbicide layering strategy targeting glyphosate-resistant and glyphosate-susceptible downy brome.

Waterhemp has evolved resistance to Group 2, 5, 9, 14, and 27 herbicides in Ontario, Canada, making control of this challenging weed even more difficult. Acetochlor is a Group 15, chloroacetanilide herbicide that has activity on many small-seeded annual grasses and some small-seeded annual broadleaf weeds, including waterhemp. The objective of this study was to ascertain if acetochlor mixtures with broadleaf herbicides (dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin), applied preemergence (PRE), increase multiple-herbicide-resistant (MHR) waterhemp control in soybean. Five trials were conducted over 2 yr (2021 and 2022). The acetochlor mixtures caused ≤7% soybean injury, except acetochlor + flumioxazin, which caused 19% soybean injury. Acetochlor applied PRE controlled MHR waterhemp 89% at 4 wk after application (WAA). Dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin controlled MHR waterhemp 59%, 67%, 58%, 64%, and 86%, respectively, at 4 WAA. Acetochlor applied in a mixture with dicamba, metribuzin, diflufenican, sulfentrazone, or flumioxazin provided good to excellent control of MHR waterhemp; control ranged from 91% to 98% but was similar to acetochlor applied alone. Acetochlor alone reduced MHR waterhemp density and biomass 98% and 93%; acetochlor + flumioxazin reduced waterhemp density and biomass by an additional 2% and 7%, respectively. This research concludes that acetochlor applied in a mixture with flumioxazin was the most efficacious mixture evaluated for MHR waterhemp control.

Common ragweed is a troublesome weed in many crops. Farmers and crop advisors in the coastal Mid-Atlantic region have reported inadequate control of common ragweed in soybean fields with glyphosate and other herbicide modes of action. To determine whether herbicide resistance was one of the causes of poor herbicide performance, 29 accessions from four states (Delaware, Maryland, New Jersey, and Virginia) where common ragweed plants survived herbicide applications and produced viable seeds were used for greenhouse screening. Common ragweed seedlings from those accessions were treated with multiple rates of cloransulam, fomesafen, or glyphosate, applied individually postemergence (POST). All accessions except one demonstrated resistance to at least one of the herbicides applied at twice the effective rate (2×), 17 accessions were two-way resistant (to glyphosate and cloransulam, or to glyphosate and fomesafen), and three-way resistance was present in eight accessions collected from three different states. Based on the POST study, five accessions were treated preemergence (PRE) with herbicides that inhibit acetolactate synthase (ALS), and two accessions were treated with herbicides that inhibit protoporphyrinogen oxidase (PPO). All accessions treated PRE with the ALS inhibitors chlorimuron or cloransulam demonstrated resistance at the 2× rates. Both accessions treated PRE with the PPO inhibitor sulfentrazone had survivors at the 2× rate. When the same accessions were treated PRE with fomesafen, one had survivors at the 2× rate, and one had survivors at the 1× rate. Results from these tests confirmed common ragweed with three-way resistance to POST herbicides is widespread in the region. In addition, this is the first confirmation that common ragweed accessions in the region are also resistant to ALS- or PPO-inhibiting herbicides when applied PRE.

Industrial hemp is a multipurpose crop cultivated for fiber, seed, human food, and animal feed. Hemp legalization in Texas creates a considerable potential to increase its acreage in semi-arid conditions; however, knowledge is limited on growing hemp optimally in Texas. Best management practices, including weed control, require evaluation for profitable hemp production. As little is known about the herbicide tolerance of hemp, field studies were conducted to test several soil-residual herbicides with different modes of action for phytotoxicity to two hemp cultivars, ‘Yuma’ and ‘Jinma’. The experimental units were randomized three times in a blocked split-plot design with hemp cultivars in the main plots and soil-residual herbicides in the subplots. Ethalfluralin, the mixture of sulfentrazone and S-metolachlor, prometryn, and S-metolachlor, resulted in 60% to 90% and 73% to 100% weed control as compared to the nontreated control in 2021 and 2022, respectively. The highest hemp germination, stand count, and plant height were observed with ethalfluralin and S-metolachlor herbicides; however, no significant differences were observed for hemp germination and plant height compared to the nontreated control. S-metolachlor, ethalfluralin, fomesafen, and prometryn resulted in similar hemp biomass compared to the nontreated control. Overall, the results indicate that hemp is tolerant to ethalfluralin, prometryn, and S-metolachlor, and these soil-residual herbicides were effective for weed control in hemp. The mixture of bicyclopyrone plus S-metolachlor, metribuzin plus S-metolachlor, and mesotrione should be avoided, as they caused significant injury to hemp plants. Future research is needed to test the efficacy of different preemergence and postemergence herbicides that can be used in industrial hemp grown under different environments, making sure the delta-9-tetrahydrocannabinol content of the hemp is below the legal content restrictions.

Preemergence applications of mesotrione, an herbicide that inhibits 4-hydroxyphenolpyruvate dioxygenase (HPPD), have recently gained regulatory approval in soybean varieties with appropriate traits. Giant ragweed is an extremely competitive broadleaf weed, and biotypes resistant to acetolactate synthase inhibitors (ALS-R) can be particularly difficult to manage with soil-residual herbicides in soybean production. This study investigated control of giant ragweed from preemergence applications of cloransulam (32 g ai ha–1), metribuzin (315 g ai ha–1), and S-metolachlor (1,600 g ai ha–1) in a factorial design with and without mesotrione (177 g ai ha–1) at two different sites over 2 yr. Treatments with mesotrione were also compared with two commercial premix products: sulfentrazone (283 g ai ha–1) and cloransulam (37 g ai ha–1), and chlorimuron (19 g ai ha–1), flumioxazin (69 g ai ha–1), and pyroxasulfone (87 g ai ha–1). At 42 d after planting, control and biomass reduction of giant ragweed were greater in treatments with mesotrione than any treatment without mesotrione. Giant ragweed biomass was reduced by 84% in treatments with mesotrione, whereas treatments without mesotrione did not reduce biomass relative to the nontreated. Following these preemergence applications, sequential herbicide treatments utilizing postemergence applications of glufosinate (655 g ai ha–1) plus fomesafen (266 g ai ha–1) and S-metolachlor (1,217 g ai ha–1) resulted in at least 97% control of giant ragweed at 42 d after planting, which was greater than sequential applications of glufosinate alone in 3 of 4 site-years. Preemergence applications of mesotrione can be an impactful addition to soybean herbicide programs designed to manage giant ragweed, with the potential to improve weed control and delay the onset of herbicide resistance by providing an additional effective herbicide site of action.

In 2021 and 2022, research was initiated at two locations to evaluate the efficacy and safety of sulfentrazone in transplanted cabbage and broccoli. Treatments included oxyfluorfen at 560 g ha−1 applied pretransplant (PRE-T), sulfentrazone applied at 116 or 233 g ha−1 PRE-T, and S-metolachlor applied at 715 g ha−1 immediately after transplanting (POST-T) followed by (fb) oxyfluorfen applied at 210 g ha−1 postemergence (POST) 14 d after planting (DAP). The weedy cover of nontreated plots averaged between 6% (14 DAP) and 72% (42 DAP); all herbicide-treated plots averaged less than 30% cover at 42 DAP. At 14 and 28 DAP, oxyfluorfen, S–metolachlor fb oxyfluorfen, and the high rate of sulfentrazone reduced total monocotyledonous and dicotyledonous weed densities by 62% and 100%, respectively, relative to the nontreated control. The density of hairy galinsoga (in New Jersey) and combined ladysthumb and prostrate knotweed (in New York) were reduced by 71% to 99%. Except for the low rate of sulfentrazone, all herbicide treatments reduced weed biomass at harvest by ≥88%. Crop injury varied in response to herbicide treatments or weed competition but was also affected by crop and location. Between 14 and 28 DAP, the greatest amount of stunting (22%) was noted in the S-metolachlor fb oxyfluorfen treatments at both locations. Averaged over treatments, greater stunting was observed in broccoli than in cabbage in New York, whereas stunting estimates were higher for cabbage in New Jersey. All treatments in New Jersey resulted in significantly increased cabbage yield and broccoli and cabbage head sizes relative to the nontreated controls. No yield difference was noted between herbicide treatments and the nontreated check in New York. Data derived from these studies will be used to enhance crop safety recommendations in northeastern U.S. production environments for sulfentrazone used PRE in transplanted cabbage and support a potential label for broccoli.

Cereal rye cover crop (cereal rye) and preemergence (PRE) herbicides are becoming common practices for managing herbicide-resistant weeds in soybean production. Adopting these two practices in combination raises concerns regarding herbicide fate in soil, given that the cereal rye biomass can intercept the herbicide spray solution, preventing it from reaching the soil. Delaying cereal rye termination until soybean planting (planting green) optimizes biomass accumulation but might also increase PRE interception. To better understand the dynamics between cereal rye and PRE herbicides, a field experiment was conducted to evaluate two soil management practices (tillage and no-till) and two cereal rye termination practices in the planting-green system (glyphosate [1,260 g ae ha−1] and roller-crimper) on the spray deposition and fate of PRE herbicides and soybean yield. The spray deposition was assessed by placing water-sensitive paper cards on the soil surface before spraying the PRE herbicides (sulfentrazone [153 g ai ha−1] + S-metolachlor [1,379 g ai ha−1]). Herbicide concentration in soil (0 to 7.6 cm) was quantified 25 d after treatment (DAT). The presence of no-till stubble and cereal rye biomass reduced the spray coverage compared to tillage at PRE application, which reflected in a reduction in the concentration of both herbicides in soil 25 DAT. Soybean yield was reduced in all three years when the cereal rye was terminated with a roller-crimper but only reduced in one year when terminated with glyphosate. Our findings indicate that mainly cereal rye biomass reduced the concentration of PRE herbicides in the soil due to the interception of the spray solution during application. Although higher cereal rye biomass accumulation can provide better weed suppression according to the literature, farmers should be aware that the biomass can lower the concentration of PRE herbicides reaching the soil, thus intensifying field scouting to ensure that weed control is not being negatively affected.

Weed management in cantaloupe and other melon crops is important to maximize fruit yield; however, there are few registered herbicides available in California. Several independent herbicide trials were conducted at University of California field stations in Davis (Yolo County), Five Points (Fresno County), and Holtville (Imperial County) from 2013 to 2019 to evaluate both registered and unregistered herbicides and incorporation methods (sprinklers, cultivation, or none) for crop safety and weed control in melons. Although specific treatments varied among locations depending on local practice and research objectives, ethalfluralin and halosulfuron were used in all experiments, and bensulide and S-metolachlor were evaluated in 4 of 6 site-years. Additional herbicides included clethodim, clomazone, DCPA, napropamide, pendimethalin, sethoxydim, and sulfentrazone. Among registered herbicides, halosulfuron, halosulfuron + ethalfluralin, and ethalfluralin + bensulide combinations provided consistently beneficial weed control across all site-years compared to the nontreated control. S-metolachlor performed as well as the best of the registered herbicides tested at each site-year; although moderate injury was noted at the Davis location, this did not reduce melon yield. The method used to incorporate preplant herbicides had a significant impact on weed control efficacy but varied by location. Mechanical incorporation of preplant herbicides resulted in improved weed control and yield compared to sprinklers. Early-season weed control, whether by herbicides or hand weeding, resulted in significant yield increase in most site-years.

If available for use on snap bean, pyroxasulfone would provide valuable preemergence control of troublesome weed species that currently contaminate the crop postharvest. The extent to which snap bean tolerates pyroxasulfone is poorly documented. The objective of this research was to quantify the extent to which pyroxasulfone tolerance exists in a large collection of snap bean cultivars. A snap bean diversity panel of 277 entries was screened for tolerance to sulfentrazone at a rate of 420 g ai ha−1 in a field trial in 2019 and 2020 near Urbana, IL. Snap bean cultivars exhibited variation in tolerance to pyroxasulfone. While a handful of cultivars were tolerant across variable environments, most cultivars were sensitive in the year that had 30% more water supply (rainfall plus sprinkler irrigation) within 3 wk of planting. Low estimates of broad-sense heritability reflect a large influence of the environment on seedling emergence and growth. With a few exceptions, currently, the margin of crop safety across diverse germplasm is insufficient for registration of pyroxasulfone use on snap bean crops.

False-green kyllinga is a problematic C4 perennial Cyperaceae species. Previous research examined herbicide efficacy but has not integrated nonchemical practices with herbicides. Replicate field experiments were conducted to evaluate late-summer postemergence applications of herbicides in combination with turf-type tall fescue interseeding for false-green kyllinga control. Seven herbicide treatments and a nontreated control formed a complete factorial, with tall fescue interseeding or no seeding (eight-by-two factorial). Six herbicide treatments consisted of single postemergence applications of halosulfuron-methyl (70 g ha–1), imazosulfuron (420 g ha–1), and sulfentrazone + carfentrazone (280 + 30 g ha–1) applied 4 wk before tall fescue interseeding (WBS) and the day of interseeding. Glyphosate (220 g ae ha–1) applied the day of interseeding was the seventh herbicide treatment. Tall fescue was interseeded in September, and false-green kyllinga control was evaluated the following summer. In combination with tall fescue interseeding, imazosulfuron and halosulfuron applied 4 WBS as well as glyphosate applied the day of interseeding controlled false-green kyllinga better than all other treatments. In July, imazosulfuron and halosulfuron treatments applied 4 WBS and combined with interseeding had 1% to 6% false-green kyllinga cover, respectively, compared to 28% and 62% cover, respectively, without interseeding. Interseeding alone controlled false-green kyllinga <50%. Imazosulfuron, halosulfuron, and sulfentrazone + carfentrazone applied the day of seeding severely injured emerging tall fescue seedlings and reduced turfgrass quality the following spring. Applying imazosulfuron or halosulfuron in late summer and interseeding turf-type tall fescue 4 wk later or applying glyphosate the day of seeding are effective strategies for postemergence false-green kyllinga control. Integrating herbicides and the cultural practice of tall fescue interseeding provided more false-green kyllinga control than either practice alone.

Small-acreage brassica vegetables need additional herbicide options. Among the vegetables grown in California are a number of niche crops, such as bok choi and brussels sprouts, that have a limited number of registered herbicides, such as DCPA. Sulfentrazone and S-metolachlor have food use tolerances for use on brassica head and stem Group 5-16, which includes crops like bok choi and brussels sprouts, as well as brassica leafy greens Subgroup 4-16B, which includes crops like kale. However, there is a lack of data for S-metolachlor and sulfentrazone on a wide variety of seeded and transplanted brassica vegetables. S-metolachlor applied preemergence (PRE) was evaluated on six direct-seeded brassica vegetables during 2019 and 2020, including bok choi, broccoli rabe, collard, mizuna, radish, and mustard greens. S-metolachlor and sulfentrazone were both evaluated PRE in transplanted brussels sprouts and kale. The results indicate that most of the seeded brassica vegetables were tolerant of S-metolachlor and that transplanted brassica vegetables were tolerant of both S-metolachlor and sulfentrazone. Broccoli rabe was moderately injured in 2020, but yields did not vary among treatments either year.

The continued dispersal of Palmer amaranth can impose detrimental impacts on cropping systems in Wisconsin. Our objective was to characterize the response of a recently introduced Palmer amaranth accession in southern Wisconsin to postemergence (POST) and preemergence (PRE) herbicides commonly used in corn and soybean. Greenhouse experiments were conducted with the Wisconsin putative herbicide-resistant accession (BRO) and two additional control accessions from Nebraska, a glyphosate-resistant (KEI2) and a glyphosate-susceptible (KEI3) accession. POST treatments were 2,4-D, atrazine, dicamba, glufosinate, glyphosate, imazethapyr, lactofen, and mesotrione at 1X and 3X label rates. PRE treatments were atrazine, mesotrione, metribuzin, S-metolachlor, and sulfentrazone at 0.5X, 1X, and 3X label rates. Plant survival of each accession was ≥63% after exposure to imazethapyr POST 3X rate. Survival of BRO and KEI2 was 44% (±13) and 50% (±13), respectively, after exposure to atrazine POST 3X rate. Survival of BRO was 69% (±12) after exposure to glyphosate POST 1X rate, whereas survival of KEI2 was 44% (±13) after exposure to glyphosate POST 3X rate. After exposure to 2,4-D POST 1X rate, KEI2 and KEI3 survival was 38% (±13) and 50% (±13), respectively. Survival of all accessions was ≤31% after exposure to 2,4-D POST 3X rate or dicamba, glufosinate, lactofen, and mesotrione POST at either rate. Plant density reduction of KEI2 was 77% (±13) after exposure to atrazine PRE 1X rate, whereas density reduction of BRO was 56% (±13) after exposure to atrazine PRE 3X rate. Plant density reduction of all accessions was ≥94% after exposure to mesotrione PRE 1X and 3X rates or metribuzin, S-metolachlor, and sulfentrazone PRE at either rate. Our results suggest that each accession is resistant (≥50% survival) to imazethapyr POST, that BRO and KEI2 are resistant to atrazine and glyphosate POST, and that KEI2 and KEI3 are resistant to 2,4-D POST. The recently introduced BRO accession exhibited multiple resistance to imazethapyr, atrazine, and glyphosate POST. In addition, atrazine PRE was ineffective for BRO control, suggesting that diversified resistance management strategies will be critical for its effective management.

Recent research reported synergism between glufosinate plus very low rates of protoporphyrinogen oxidase (PPO)–inhibiting herbicides on select broadleaf weeds. Two field studies, each consisting of four trials, were conducted in 2020 and 2021 in commercial fields with glyphosate-resistant (GR) horseweed in Ontario, Canada. Study 1 evaluated GR horseweed control with glufosinate plus five PPO inhibitors at 5% of the label rate; study 2 evaluated what dose of saflufenacil is needed when co-applied with glufosinate to improve GR horseweed control. In study 1, glufosinate plus very low rates of PPO-inhibiting herbicides provided low GR horseweed control. At site 1, despite the synergistic increase in GR horseweed control with saflufenacil (1.25 g ai ha–1) plus glufosinate (300 g ai ha–1), the level of control did not exceed 42% at 2 and 4 wk after application (WAA); the interaction was additive at 8 WAA. The co-application of glufosinate (300 g ai ha–1) with pyraflufen-ethyl (0.34 g ai ha–1), pyraflufen-ethyl/2,4-D (26.4 g ai ha–1), flumioxazin (5.35 g ai ha–1), fomesafen (12 g ai ha–1), or sulfentrazone (7 g ai ha–1) resulted in an additive interaction for GR horseweed control at 2, 4, and 8 WAA. However, glufosinate plus pyraflufen-ethyl or sulfentrazone was antagonistic at 8 WAA. In study 2, similar doses of saflufenacil were required for 50%, 80%, and 95% GR horseweed control whether glufosinate was included in the mixture or not. Interactions between glufosinate (300 g ai ha–1) plus saflufenacil at 1.56, 3.13, 6.25, and 12.5 g ai ha–1 were antagonistic at 2, 4, and 8 WAA at sites 1, 2, and 3; all other interactions were additive. The results of this research indicate there was little to no benefit of adding very low rates of PPO-inhibiting herbicides to glufosinate to improve GR horseweed control under field conditions.

Herbicide management information is lacking for recently developed turf-type bahiagrass germplasm. The objective of this study was to evaluate the herbicide tolerance of nine experimental bahiagrass genotypes compared to the industry standard ‘Argentine’. The experimental entries included Argentine and ‘Wilmington’ mutants, and wild-type breeding lines. Plants were grown under greenhouse conditions, and 12 herbicides were applied at 1× and 2× labeled rates. Bentazon, bromoxynil, carfentrazone + 2,4-D + MCPP + dicamba, and carfentrazone were classified as safe. Fluroxypyr, halosulfuron, and triclopyr + clopyralid reduced growth >50% when applied at twice the label rate. Fenoxaprop, sulfentrazone + imazethapyr, and thiencarbazone + iodosulfuron + dicamba reduced growth and caused turfgrass injury above an acceptable threshold (≥20%). In general, the Argentine mutants showed greater herbicide injury compared to the Wilmington mutants. However, metsulfuron exceeded the acceptable injury threshold and stopped growth in all the genotypes, Argentine and genotype WT6 were the least injured by this herbicide. The experimental genotype WT6 consistently showed the greatest herbicide tolerance. Except for one genotype (WT4), the experimental genotypes responded similarly or better than Argentine to the tested herbicides, except for metsulfuron.

Late-season control of Palmer amaranth in postharvest wheat stubble is important for reducing the seedbank. Our objectives were to evaluate the efficacy of late-season postemergence herbicides for Palmer amaranth control, shoot dry biomass, and seed production in postharvest wheat stubble. Field experiments were conducted at Kansas State University Agricultural Research Center near Hays, KS, during 2019 and 2020 growing seasons. The study site had a natural seedbank of Palmer amaranth. Herbicide treatments were applied 3 wk after wheat harvest when Palmer amaranth plants had reached the inflorescence initiation stage. Palmer amaranth was controlled by 96% to 98% 8 wk after treatment and shoot biomass as well as seed production was prevented when paraquat was applied alone or when mixed with atrazine, metribuzin, flumioxazin, 2,4-D, sulfentrazone, pyroxasulfone + sulfentrazone, or flumioxazin + metribuzin, and with glyphosate + dicamba, glyphosate + 2,4-D, saflufenacil + 2,4-D, glufosinate + dicamba + glyphosate, and glufosinate + 2,4-D + glyphosate. Palmer amaranth was controlled by 89% to 93% with application of glyphosate, glufosinate, dicamba + 2,4-D, saflufenacil + atrazine, and saflufenacil + metribuzin resulting in Palmer amaranth shoot biomass of 15 to 56 g m−2 and production of 1,080 to 7,040 seeds m−2. Palmer amaranth control was less than 86% with application of dicamba, 2,4-D, dicamba + atrazine, and saflufenacil resulting in Palmer amaranth shoot biomass of 38 to 47 g m−2 and production of 3,110 to 6,190 seeds m−2. Palmer amaranth was controlled 63% and 72%, shoot biomass was 178 and 161 g m−2, and seed production was 35,180 and 39,510 seeds m−2, respectively, with application of 2,4-D + bromoxynil + fluroxypyr, and bromoxynil + pyrasulfotole + atrazine. Growers should use these effective postemergence herbicide mixes for Palmer amaranth control to prevent seed prevention postharvest in wheat stubble.

Palmer amaranth is the most problematic and troublesome weed in agronomic cropping systems in the United States. Acetolactate synthase (ALS) inhibitor and glyphosate-resistant (GR) Palmer amaranth has been confirmed in Nebraska and it is widespread in several counties. Soybean resistant to isoxaflutole/glufosinate/glyphosate has been developed that provides additional herbicide site of action for control of herbicide-resistant weeds. The objectives of this study were to evaluate herbicide programs for control of ALS inhibitor/GR Palmer amaranth and their effect on Palmer amaranth density and biomass, as well as soybean injury and yield in isoxaflutole/glufosinate/glyphosate–resistant soybean. Field experiments were conducted in a grower’s field infested with ALS inhibitor and GR Palmer amaranth near Carleton, Nebraska, in 2018 and 2019. Isoxaflutole applied alone or mixed with sulfentrazone/pyroxasulfone, flumioxazin/pyroxasulfone, or imazethapyr/saflufenacil/pyroxasulfone provided similar control (86%–99%) of Palmer amaranth 21 d after PRE (DAPRE). At 14 d after early-POST (DAEPOST), isoxaflutole applied PRE and PRE followed by (fb) POST controlled Palmer amaranth by 10% to 63% compared to 75% to 96% control with glufosinate applied EPOST in both years. A PRE herbicide fb glufosinate controlled Palmer amaranth 80% to 99% 21 d after late-POST (DALPOST) in 2018, and reduced density 89% to 100% in 2018 and 58% to 100% in 2019 at 14 DAEPOST. No soybean injury was observed from any of the herbicide programs tested in this study. Soybean yield in 2019 was relatively higher due to higher precipitation compared with 2018 with generally no differences between herbicide programs. This research indicates that herbicide programs are available for effective control of ALS inhibitor/GR Palmer amaranth in isoxaflutole/glufosinate/glyphosate-resistant soybean.

Yellow nutsedge is one of the most widely distributed and troublesome weeds in the world. Field and greenhouse studies were conducted to optimize strategies for increased yellow nutsedge control in turfgrass with halosulfuron and sulfentrazone. In the field study in yellow nutsedge and perennial ryegrass mixture, single or sequential applications (3 wk after initial) of halosulfuron or sulfentrazone were made on June 3, June 23, July 15, or August 5 in 2013, 2014, 2015, and 2016. Percent yellow nutsedge control was rated within the same growing season on September 17 and the following year on June 3 for carryover control. Field and greenhouse studies confirm that sequential applications of halosulfuron with a 3-wk interval resulted in >95% control in a yellow nutsedge–turfgrass mixture. In a greenhouse study, both herbicides reduced yellow nutsedge root and rhizome dry mass from 39% to 98%, reduced number of new tubers and tuber fresh weight from 38% to 100%, and prevented re-emergence. Sequential applications of either herbicide within a 3-wk interval early postemergence is recommended for optimal control. Herbicide application to yellow nutsedge using halosulfuron and sulfentrazone should be made as early as possible postemergence, preferably at the three- to five-leaf stage or 200 to 250 growing degree days (GDD, 10 C base). Mowing can be an effective method to reduce yellow nutsedge growth. Mowing at 7.6 cm weekly reduced yellow nutsedge rhizome dry mass by 55% and number of new tubers formed by 63% in the greenhouse study. Physical removal of yellow nutsedge plants such as hand-pulling can be an effective method to manage yellow nutsedge and is most effective at the three- to five-leaf stage (200 to 250 GDD). End-users can maximize yellow nutsedge control by integrating early herbicide treatments and cultural practices such as mowing and hand-pulling.

The ability to use the protoporphyrinogen oxidase (PPO)-inhibiting herbicides fomesafen, flumioxazin, and sulfentrazone in potato is limited regionally or by soil texture, largely because of crop injury noted in research in the 1990s. With that in mind, we evaluated whether reducing the herbicide rates could maintain weed control while providing more consistent crop safety. Studies were conducted on a silt loam and a coarse-textured loamy sand soil. Soil texture played a greater than anticipated role in PPO-inhibitor herbicide injury risk as it relates to high-precipitation events. For example, in 2020 at the silt loam location, there were five precipitation events across the season that exceeded 2.5 cm, including one 6 d after treatment (DAT), and a seasonal total precipitation that was over 10 cm greater than the previous year. Despite excessive moisture and initial potato injury as high as 27% where flumioxazin was applied at the high rate with S-metolachlor, by 29 DAT injury was less than 10% in all treatments, and marketable tuber yield was similar among treatments. In contrast, in 2020 at the loamy sand location, there were four precipitation events across the season that exceeded 2.5 cm, and potato injury was as much as 60%. In 2020 the high amount of injury from flumioxazin was hypothesized to be caused by precipitation before herbicide application and not after, suggesting a need for more research in this area. This work documents the fine line between yield reduction presumably caused by reduced weed control and yield reduction assumed to be related to herbicide injury. This delineation between adequate weed control and consistent crop safety may differ by soil texture and environmental conditions, supporting the notion that custom-tailored weed management may become more necessary as high-precipitation events become more common in upper midwestern U.S. agricultural systems.