Flow control of a low-aspect-ratio flat-plate heaving wing at an average angle of attack of $10^{\circ }$ by a steady-blowing jet is numerically studied by using a feedback immersed boundary–lattice Boltzmann method. Blowing jets at the leading edge, mid-chord and trailing edge are considered. The wing enjoys the highest lift production with the trailing-edge downstream blowing jet, which improves the average lift by 50.0 % at $Re = 1000$ and 22.9 % at $Re = 5000$ through the enhancement of the tip vortex circulation caused by the increase in the mass flux of the shear layer at the wing tips. This increase in mass flux decreases as $Re$ increases from 1000 to 5000 due to its self-limiting mechanism. A mid-chord vertical blowing jet induces a middle vortex which enhances the lift production but the enhancement is smaller than that of trailing-edge downstream blowing jet. Other jet arrangements do not significantly increase the lift coefficient, but the mid-chord upstream blowing jet experiences a significant reduction in the drag coefficient, leading to an increase of 50.6 % in the average lift-to-drag ratio. The effectiveness of the flow control is not significantly affected by the aspect ratio.

Flying insects exhibit remarkable capabilities in coordinating their olfactory sensory system and flapping wings during odour plume-tracking flights. While observations have indicated that their flapping wing motion can ‘sniff’ up the incoming plumes for better odour sampling range, how flapping motion impacts the odour concentration field around the antennae is unknown. Here, we reconstruct the body and wing kinematics of a forwards-flying butterfly based on high-speed images. Using an in-house computational fluid dynamics solver, we simulate the unsteady flow field and odourant transport process by solving the Navier–Stokes and odourant advection-diffusion equations. Our results show that, during flapping flight, the interaction between wing leading-edge vortices and antenna vortices strengthens the circulation of antenna vortices by over two-fold compared with cases without flapping motion, leading to a significant increase in odour intensity fluctuation along the antennae. Specifically, the interaction between the wings and antennae amplifies odour intensity fluctuations on the antennae by up to 8.4 fold. This enhancement is critical in preventing odour fatigue during odour-tracking flights. Further analysis reveals that this interaction is influenced by the inter-antennal angle. Adjusting this angle allows insects to balance between resistance to odour fatigue and the breadth of odour sampling. Narrower inter-antennal angles enhance fatigue resistance, while wider angles extend the sampling range but reduce resistance. Additionally, our findings suggest that while the flexibility of the wings and the thorax's pitching motion in butterflies do influence odour fluctuation, their impact is relatively secondary to that of the wing–antenna interaction.

Numerous flying and swimming creatures use the ground effect to boost their propulsive performance, with the ‘ground’ referring to either a solid boundary or a free surface. While our knowledge of how a solid boundary affects biolocomotion is relatively comprehensive, the ground effect of a free surface is not fully understood. To address this limitation, we conduct a numerical investigation on the propulsion performance of a flapping plate under a free surface, subject to a range of control parameters. When the Froude number ($Fr$) is very low (i.e. little surface deformation), the effects of a free surface are similar to those of a solid boundary, with enhanced thrust and input power but little change in efficiency. However, as $Fr$ increases (i.e. more surface deformation), our results reveal an optimal $Fr$ of approximately 0.6, where the free surface induces a more streamlined flow around the flapping plate, effectively reducing the added mass. This results in a significant decrease in input power and greatly enhanced efficiency.

During stroke reversals, insect wings interact with their own wake flow from the preceding half-stroke, resulting in an unsteady aerodynamic mechanism known as ‘wing–wake interaction’ or ‘wake capture’. To better elucidate this mechanism, we numerically solved the incompressible Navier–Stokes equations at Reynolds numbers $10^2$ and $10^3$. Simulations were conducted for wing planforms defined using the beta function distribution with varying aspect ratios ($AR=2\unicode{x2013}6$) and radial centroid locations ($\hat {r}_1=0.4\unicode{x2013}0.6$), whilst employing representative normal hovering kinematics. The wake development from the considered flapping wing planforms was investigated, and the wake capture contribution to aerodynamic force production was quantified by comparing the force generation between the fifth and first stroke cycles at multiple sections along the wingspan. Our results revealed that on the inboard wing region experiencing an attached leading-edge vortex (LEV) structure, wing–wake interaction is dominated by an unsteady downwash effect, resulting in a reduction in local force production. However, in regions closer to the wingtip experiencing detachment of the LEV, wing–wake interaction is dominated by an unsteady upwash effect, leading to an increase in local force production. Consequently, the global wake capture force production is controlled by the extent of LEV detachment, which primarily increases with the increase of wing aspect ratio. This suggests that for normal hovering flapping wings, the typical loss in translational force production due to wingtip stall is partially mitigated by wake capture effects.

Understanding the propulsion of a swimmer in a large group of individuals holds the key to unravelling the intriguing dynamics of active matter collective motion. Here, we develop a two-dimensional (2-D) self-assembled rotor, powered by bacterial flagella. At a water–air interface, the average direction of rotation of a rotor is fixed. When the chiral rotor is put into a 2-D bacterial suspension, we examine the average and fluctuation of the angular velocity of the rotor. Remarkably, the average angular velocity of a rotor is found to increase up to 3 times when the density of surrounding bacterial suspension increases and the increase is nonlinear. In a dense suspension of bacteria, the existence of a rotor disrupts vortices in the surrounding active turbulence, and the acceleration of the rotor is independent of the activity level of the surrounding free bacteria. The nonlinear acceleration thus results from hydrodynamic interaction with surrounding crowdedness that can be quantitatively explained by hydrodynamic simulation. The simultaneity between the acceleration of rotor and free bacteria in active turbulence suggests that crowding-induced acceleration may promote the onset of instability. The result will inspire new active-matter-based microfluidic devices with improved transport properties.

Single-flagellated bacteria are ubiquitous in nature. They exhibit various swimming modes using their flagella to explore complex surroundings such as soil and porous polymer networks. Some single-flagellated bacteria swim with two distinct modes, one with the flagellum extended away from its body and another with the flagellum wrapped around it. The wrapped mode has been observed when bacteria swim under tight confinements or in highly viscous polymeric melts. In this study we investigate the hydrodynamics of these two modes inside a circular pipe. We find that the wrapped mode is slower than the extended mode in bulk but more efficient under strong confinement due to a hydrodynamic increase of its flagellum translation–rotation coupling and an Archimedes’ screw-like configuration that helps to move the fluid along the pipe.

We present evidence revealing that an object with specific properties can exhibit multiple stable falling postures at low Reynolds numbers. By scrutinizing the force equilibrium relationship of a fixed object at various attack angles and Reynolds numbers, we introduce a methodology that can obtain the stable falling postures of the object. This method saves computational resources and more intuitively presents the results in the full parameter domain. Our findings are substantiated by free-fall tests conducted through both physical experiments and numerical simulations, which validate the existence of multiple stable solutions in accordance with the interpolation results obtained with fixed objects. Additionally, we quantify the abundance and distribution patterns of stable falling postures for a diverse range of representative shapes. This discovery highlights the existence of multiple stable solutions that are universally present across objects of different shapes. The implications of this research extend to the design, stability control and trajectory prediction of all free and controlled flights in both air and water.

Chiral fluids – such as fluids under rotation or a magnetic field as well as synthetic and biological active fluids – flow in a different way than ordinary ones. Due to symmetries broken at the microscopic level, chiral fluids may have asymmetric stress and viscosity tensors, for example giving rise to a hydrostatic torque or non-dissipative (odd) and parity-violating viscosities. In this article, we investigate the motion of rigid bodies in such an anisotropic fluid in the incompressible Stokes regime through the mobility matrix, which encodes the response of a solid body to forces and torques. We demonstrate how the form of the mobility matrix, which is usually determined by particle geometry, can be analogously controlled by the symmetries of the fluid. By computing the mobility matrix for simple shapes in a three-dimensional (3-D) anisotropic chiral fluid, we predict counterintuitive phenomena such as motion at an angle to the direction of applied forces and spinning under the force of gravity.

We present experiments on oscillating hydrofoils undergoing combined heaving and pitching motions, paying particular attention to connections between propulsive efficiency and coherent wake features extracted using modal analysis. Time-averaged forces and particle image velocimetry measurements of the flow field downstream of the foil are presented for a Reynolds number of $Re=11\times 10^3$ and Strouhal numbers in the range $St=0.16\unicode{x2013}0.35$. These conditions produce 2S and 2P wake patterns, as well as a near-momentumless wake structure. A triple decomposition using the optimized dynamic mode decomposition method is employed to identify dominant modal components (or coherent structures) in the wake. These structures can be connected to wake instabilities predicted using spatial stability analyses. Examining the modal components of the wake provides insightful explanations into the transition from drag to thrust production, and conditions that lead to peak propulsive efficiency. In particular, we find modes that correspond to the primary vortex development in the wakes. Other modal components capture elements of bluff body shedding at Strouhal numbers below the optimum for peak propulsive efficiency and characteristics of separation for Strouhal numbers higher than the optimum.

Microorganisms are ubiquitous in nature and technology. They inhabit diverse environments, ranging from small river tributaries and lakes, to oceans, as well as wastewater treatment plants and food manufacturing. In many of these environments, microorganisms coexist with settling particles. Here, we investigate the effects of microbial activity (swimming E. coli) on the settling dynamics of passive colloidal particles using particle tracking methods. Our results reveal the existence of two distinct regimes in the correlation length scale ($L_u$) and the effective diffusivity of the colloidal particles ($D_{eff}$), with increasing bacterial concentration ($\phi _b$). At low $\phi _b$, the parameters $L_u$ and $D_{eff}$ increase monotonically with increasing $\phi _b$. Beyond critical $\phi _b$, a second regime is found where both $D_{eff}$ and $L_u$ are independent of $\phi _b$. We demonstrate that the transition between these regimes is characterized by the emergence of bioconvection. We use experimentally measured particle-scale quantities $L_u$ and $D_{eff}$ to predict the critical bacterial concentration for the diffusion–bioconvection transition.

Insects flip their wings around each stroke reversal and may enhance lift in the early stage of a half-stroke. The possible lift-enhancing mechanism of this rapid wing rotation and its strong connection with wake vortices are still underexplored, especially when unsteady leading-edge vortex (LEV) behaviours occur. Here, we numerically studied the lift generation and underlying vorticity dynamics during the rapid rotation of a low aspect ratio flapping wing at a Reynolds number (${\textit {Re}}$) of 1500. Our findings prove that when the outboard LEV breaks down, an advanced rotation can still enhance the lift in the early stage of a half-stroke, which originates from an interaction with the breakdown vortex in the outboard region. This interaction, named the breakdown-vortex jet mechanism, results in a jet and thus a higher pressure on the upwind surface, including a stronger wingtip suction force on the leeward surface. Although the stable LEV within the mid-span retains its growth and location during an advanced rotation, it can be detrimental to lift enhancement as it moves underneath the wing. Therefore, for a flapping wing at ${\textit {Re}}\sim 10^3$, the interactions with stable and breakdown leading-edge vortices lead to the single-vortex suction and breakdown-vortex jet mechanisms, respectively. In other words, the contribution of wing–wake interaction depends on the spanwise location. The current work also implies the importance of wing kinematics to this wing–wake interaction in flapping wings, and provides an alternative perspective for understanding this complex flow phenomenon at ${\textit {Re}}\sim 10^3$.

Birds employ rapid pitch-up motions close to the ground for different purposes: perching birds use this motion to decelerate and come to a complete stop while hunting birds, such as bald eagles, employ it to catch prey and swiftly fly away. Motivated by these observations, our study investigates how natural flyers accomplish diverse flying objectives by rapidly pitching their wings while decelerating near ground. We conducted experimental and analytical investigations focusing on rapidly pitching plates during deceleration in close proximity to the ground to explore the impact of ground proximity on the unsteady dynamics. Initially, we executed synchronous pitch-up motion, where both pitching and deceleration have the same motion duration, at different ground heights. Experimental results demonstrate that as the pitching wing approaches the ground, the instantaneous lift increases by approximately $38\,\%$ compared with a far-from-ground case, while the initial peak drag force remains relatively unchanged. Our analytical model conforms to this trend, predicting an increase in lift force as the wing approaches the ground, indicating enhanced added mass and circulatory lift force due to the ground effect. Next, we examined asynchronous pitch-up motion cases, where rapid pitching motions were initiated at different stages of deceleration. The results reveal that initiating the wing pitch early in the deceleration leads to the formation of larger counter-rotating vortices at the early stage of the manoeuvre. These vortices generate stronger dipole jets that orient backward in the later stages of the manoeuvre after impinging with the ground surface, which hunting birds utilize to accelerate after catching prey. Conversely, when the wing pitch is delayed, smaller vortices form, but their growth is postponed until late in the manoeuvre. This delayed vortex growth produces lift and drag force at the end phase of the manoeuvre that facilitates a smooth landing or perching. Thus, through strategic tuning of a rapid pitch-up motion with deceleration, natural flyers, such as birds, achieve diverse flying objectives.

Biological microorganisms and artificial micro-swimmers often locomote in heterogeneous viscous environments consisting of networks of obstacles embedded into viscous fluid media. In this work, we use the squirmer model and present a numerical investigation of the effects of shape on swimming in a heterogeneous medium. Specifically, we analyse the microorganism's propulsion speed as well as its energetic cost and swimming efficiency. The analysis allows us to probe the general characteristics of swimming in a heterogeneous viscous environment in comparison with the case of a purely viscous fluid. We found that a spheroidal microorganism always propels faster, expends less energy and is more efficient than a spherical microorganism in either a homogeneous fluid or a heterogeneous medium. Moreover, we determined that above a critical eccentricity, a spheroidal microorganism in a heterogeneous medium can swim faster than a spherical microorganism in a homogeneous fluid. Based on an analysis of the forces acting on the squirmer, we offer an explanation for the decrease in the squirmer's speed observed in heterogeneous media compared with homogeneous fluids.

The classical paper by Lighthill (Commun. Pure Appl. Maths, vol. 109, 1952, p. 118) on the propulsion of ciliated microorganisms has become the reference against which many modern studies on swimming in low Reynolds number are compared. However, Lighthill's study was limited to propulsion in a uniform flow, whereas several biologically relevant microorganisms experience non-uniform flows. Here we propose a benchmark for ciliary propulsion in paraboloidal flows. We first consider the axisymmetric problem, with the microorganisms on the centreline of the background flow, and derive exact analytical solutions for the flow field. Our results reveal flow features, swimming characteristics and performance metrics markedly different from those generated in a uniform flow. In particular, the background paraboloidal flow introduces a Stokes quadrupole singularity at the leading-order flow field, generating vortices. Moreover, we determine the necessary conditions on the strength of the background flow for optimal power dissipation and swimming efficiency. We then consider the more general case of a microorganism off the centreline of the background flow. In this case, the squirmer experiences a paraboloidal, linear shear and uniform flows due to its position relative to the flow's centreline. Our findings show that while the linear shear flow does not affect the translational and rotational velocities of the squirmer, it does influence the velocity field and, therefore, the power dissipation.

Shear-induced migration of elongated micro-swimmers exhibiting anisotropic Brownian diffusion at a population scale is investigated analytically in this work. We analyse the steady motion of confined ellipsoidal micro-swimmers subject to coupled diffusion in a general setting within a continuum homogenisation framework, as an extension of existing studies on macro-transport processes, by allowing for the direct coupling of convection and diffusion in local and global spaces. The analytical solutions are validated successfully by comparison with numerical results from Monte Carlo simulations. Subsequently, we demonstrate from the probability perspective that symmetric actuation does not yield net vertical polarisation in a horizontal flow, unless non-spherical shapes, external fields or direct coupling effects are harnessed to generate steady locomotion. Coupled diffusivities modify remarkably the drift velocity and vertical migration of motile micro-swimmers exposed to fluid shear. The interplay between stochastic swimming and preferential alignment could explain the diverse concentration and orientation distributions, including rheological formations of depletion layers, centreline focusing and surface accumulation. Results of the analytical study shed light on unravelling peculiar self-propulsion strategies and dispersion dynamics in active-matter systems, with implications for various transport problems arising from the fluctuating shape, size and other external or inter-particle interactions of swimmers in confined environments.

Recent studies have shown that superimposing rhythmic perturbations to oscillating tailbeats could simultaneously enhance both the thrust and efficiency (Lehn et al., Phys. Rev. Fluids, vol. 2, 2017, p. 023101; Chao et al., PNAS Nexus, vol. 3, 2024, p. 073). However, these investigations were conducted with a tethered flapping foil, overlooking the self-propulsion intrinsic to real swimming fish. Here, we investigate how the high-frequency, low-amplitude superimposed rhythmic perturbations impact the self-propelled pitching and heaving swimming of a rigid foil. The swimming-speed-based Reynolds number ranges from 1400 to 2700 in our study, depending on superimposed perturbations and swimming modes. Numerical results reveal that perturbations significantly increase swimming speeds in both pitching and heaving motions, while enhancing efficiency exclusively in the heaving motion. Further derived scaling laws elucidate the relationships of perturbations with speeds, power costs and efficiency, respectively. These findings not only hypothesise the potential advantages of perturbations in biological systems, but also inspire designs and controls in biomimetic propulsion and manoeuvring within aquatic environments.

The hydrodynamics of a self-propelling swimmer undergoing intermittent S-start swimming are investigated extensively with varying duty cycle $DC$, swimming period $T$, and tailbeat amplitude $A$. We find that the steady time-averaged swimming speed $\bar {U}_x$ increases directly with $A$, but varies inversely with $DC$ and $T$, where there is a maximal improvement of $541.29\,\%$ over continuous cruising swimming. Our results reveal two scaling laws, in the form of input versus output relations, that relate the swimmer's kinematics to its hydrodynamic performance: swimming speed and efficiency. A smaller $DC$ causes increased fluctuations in the swimmer's velocity generation. A larger $A$, on the other hand, allows the swimmer to reach steady swimming more quickly. Although we set out to determine scaling laws for intermittent S-start swimming, these scaling laws extend naturally to burst-and-coast and continuous modes of swimming. Additionally, we have identified, categorized and linked the wake structures produced by intermittent S-start swimmers with their velocity generation.

The hydrodynamic influence of surface texture on static surfaces ranges from large drag penalties (roughness) to potential performance benefits (shark-like skin). Although it is of wide-ranging research interest, the impact of roughness on flapping systems has received limited attention. In this work, we explore the effect of roughness on the unsteady performance of a harmonically pitching foil through experiments using foils with different surface roughness, at a fixed Strouhal number and within the Reynolds number ($Re$) range of $17\,000\unicode{x2013}33\,000$. The foils’ surface roughness is altered by changing the distribution of spherical-cap-shaped elements over the propulsor area. We find that the addition of surface roughness does not improve the performance compared with a smooth surface over the $Re$ range considered. The analysis of the flow fields shows near-identical wakes regardless of the foil's surface roughness. The performance reduction mainly occurs due to an increase in profile drag. However, we find that the drag penalty due to roughness is reduced from $76\,\%$ for a static foil to $16\,\%$ for a flapping foil at the same mean angle of attack, with the strongest decrease measured at the highest $Re$. Our findings highlight that the effect of roughness on dynamic systems is very different than that on static systems; thereby, it cannot be estimated by only using information obtained from static cases. This also indicates that the performance of unsteady, flapping systems is more robust to the changes in surface roughness.

We investigate numerically the propulsion characteristics of an oscillating foil undergoing coupled heave and pitch motion in a linearly density-stratified flow. A parameter space defined by the internal Froude number ($1 \le Fr \le 10$) and the maximum angle of attack ($5^\circ \le {\alpha _0} \le 30^\circ$) is considered in our study. The results demonstrate a significant enhancement in both thrust production and propulsive efficiency due to the stratification influence. Notably, the highest efficiency exceeding $80\,\%$ is achieved under moderate stratification conditions, surpassing the performance observed in a homogeneous fluid. We attribute this optimum performance to the proper match between the stratification effect and foil kinematics, which gives rise to intense vortex interactions and sufficient wave–mean flow interactions in the near wake of the oscillating foil. Consequently, the energy is transferred towards wake structures to form a high-intensity momentum jet in close proximity to the foil's trailing edge, indicating efficient propulsion. Furthermore, we find that the stratifications within the moderate-to-strong transitional regime display a reduced dependence of propulsive efficiency on the maximum angle of attack, primarily due to the delaying and alleviating effects on dynamic-stall events. Such a mechanism enables the oscillating foil to maintain a satisfactory performance by sufficiently high angles of attack without the penalty of stall events. Based on our findings, we propose that animals or artificial vehicles utilising oscillatory propulsion can benefit from the presence of density stratification in the surrounding fluid.

Natural flyers and swimmers employ flexible wings or fins to propel. While the complex interaction between the foil with deformation and the surrounding non-steady fluid environment defines the propulsion performance of the propellers, elucidating the interaction mechanism through theoretical models earns much challenge. Based on elastokinetics and linear potential flow theory, this study proposes a simplified analytical model to clarify the kinematics and the propulsion performance of a flexible thin foil pitching in flow. The dynamical forces, including the inertial force of the foil and the non-steady fluid pressure, are used to determine the averaged deformation angle of the foil. Combining the averaged deformation angle and the prescribed driving pitching motion, the kinematics of the foil is resolved analytically. Based on the analytical expressions for the corresponding pitching motion, analytical relations among the physical parameters of the stiffness and the mass of the foil and the driving frequency are given to these critical conditions, including resonance of the flow–structure system, equal pitching amplitude between the flexible foil and the rigid counterpart, phase angle transition from ${\rm \pi}/2$ to $- {\rm \pi}/2$. Subsequently, the performance of the foil, including the thrust, the power and the propulsive efficiency, as a function of the flexibility of the foil are derived, together with the introduction of a bluff body type offset drag to the thrust. The formulated analytical theory, which matches nicely with previous reports, will help to interpret the effect of the flexibility and regulate the propulsive performance of the flexible foil when pitching in fluid.